Click Specification

Combination Slotted Round Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T37-I/T37-IA+T40) - 2013

Display drawing:

Thread Size
d

d
PP
n	max
	min
t	max
	min
Socket No.
M₁	Ref.
M₂	Ref.
P	Type I	max
		min
	Type IA	max
		min
d_k	max
	min
k	max
	min
L₀ ^④	Nominal
Y ^④	Fully Threaded	max
b ^④	Thread Length (Long screws)	min

0.0600	0.0730	0.0860	0.0990	0.1120	0.1250	0.1380	0.1510
48	42	32	28	24	20	20	19
0.023	0.026	0.031	0.035	0.039	0.043	0.048	0.048
0.016	0.019	0.023	0.027	0.031	0.035	0.039	0.039
0.039	0.044	0.048	0.053	0.058	0.063	0.068	0.072
0.029	0.033	0.037	0.040	0.044	0.047	0.051	0.055
0	0	1	1	1	2	2	2
0.066	0.075	0.093	0.102	0.111	0.147	0.155	0.164
/	/	0.092	/	0.110	0.142	0.150	/
0.035	0.045	0.046	0.055	0.065	0.063	0.073	0.081
0.015	0.026	0.027	0.035	0.046	0.035	0.045	0.055
/	/	0.047	/	0.067	0.063	0.071	/
/	/	0.031	/	0.051	0.045	0.053	/
0.113	0.138	0.162	0.187	0.211	0.236	0.260	0.285
0.099	0.122	0.146	0.169	0.193	0.217	0.240	0.264
0.053	0.061	0.069	0.078	0.086	0.095	0.103	0.111
0.043	0.051	0.059	0.067	0.075	0.083	0.091	0.099
7/16	9/16	5/8	3/4	13/16	15/16	1	1-1/8
0.021	0.024	0.031	0.036	0.042	0.050	0.050	0.053
0.360	0.440	0.520	0.590	0.670	0.750	0.830	0.910

Thread Size
d

10#

12#

1/4

5/16

3/8

7/16

1/2

d
PP
n	max
	min
t	max
	min
Socket No.
M₁	Ref.
M₂	Ref.
P	Type I	max
		min
	Type IA	max
		min
d_k	max
	min
k	max
	min
L₀ ^④	Nominal
Y ^④	Fully Threaded	max
b ^④	Thread Length (Long screws)	min

0.1640	0.1900	0.2160	0.2500	0.3125	0.3750	0.4375	0.5000
18	16	14	14	12	12	10	10
0.054	0.060	0.067	0.075	0.084	0.094	0.094	0.106
0.045	0.050	0.056	0.064	0.072	0.081	0.081	0.091
0.077	0.087	0.096	0.109	0.132	0.155	0.196	0.211
0.058	0.065	0.073	0.082	0.099	0.117	0.148	0.159
2	2	3	3	3	4	4	4
0.171	0.188	0.242	0.261	0.301	0.380	0.395	0.409
0.164	0.182	0.234	0.255	0.291	0.368	/	/
0.090	0.108	0.108	0.130	0.170	0.208	0.221	0.236
0.064	0.082	0.082	0.104	0.144	0.182	0.196	0.211
0.086	0.105	0.103	0.126	0.162	0.195	/	/
0.068	0.087	0.085	0.108	0.144	0.177	/	/
0.309	0.359	0.408	0.472	0.590	0.708	0.750	0.813
0.287	0.334	0.382	0.443	0.557	0.670	0.707	0.766
0.120	0.137	0.153	0.175	0.216	0.256	0.328	0.355
0.107	0.123	0.139	0.160	0.198	0.237	0.307	0.332
1-1/4	1-3/8	1-5/8	1-13/16	1-13/16	1-7/8	1-7/8	1-7/8
0.056	0.062	0.071	0.071	0.083	0.083	0.100	0.100
0.980	1.140	1.300	1.500	1.500	1.500	1.500	1.500

①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
②,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable.
③,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
④,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser.

Send Inquiry

Similar Standards

1	[ASME] ASME B 18.6.3 (T20-III+T40) - 2013	Combination Slotted-Pan Head Tapping Screws, Type III - Type AB and ABR
2	[ASME] ASME B 18.6.3 (T34-I+T40) - 2013	Combination Slotted Type I Indented Hex Washer Head Tapping Screws - Type AB and ABR
3	[ASME] ASME B 18.6.3 (T26-III+T40) - 2013	Combination Slotted Truss Head Tapping Screws，Type III - Type AB and ABR
4	[ASME] ASME B 18.6.3 (T26-I+T40) - 2013	Combination Slotted Truss Head Tapping Screws，Type I - Type AB and ABR
5	[ASME] ASME B 18.6.3 (T20-I+T40) - 2013	Combination Slotted-Pan Head Tapping Screws, Type I - Type AB and ABR
6	[ASME] ASME B 18.6.3 (T20-IA+T40) - 2013	Combination Slotted-Pan Head Tapping Screws, Type IA - Type AB and ABR
7	[NF] NF E 25-666 - 1987	Tapping Screws-Z Cross Recessed And Slotted Pan Head - Symbol CBL ZS