| 简体 | 繁體 |

Square Recessed Round Head Tapping Screws - Type AB and ABR

ASME B 18.6.3 (T36-III+T40) - 2013

Display drawing:

美标ASME B18.6.3 (T36-III+T40) - 2013 ASME Square Recessed Round Head Tapping Screws - Type AB and ABR
Thread Size
d
3# 4# 5# 6# 7# 8# 10# 12# 1/4 5/16 3/8
d
PP
Socket No.
M Ref.
P max
min
dk max
min
k max
min
L0 Nominal
Y Fully Threaded max
b Thread Length (Long screws) min
0.0990 0.1120 0.1250 0.1380 0.1510 0.1640 0.1900 0.2160 0.2500 0.3125 0.3750
28 24 20 20 19 18 16 14 14 12 12
0 0 1R 1R 1R 2R 2R 3R 3R 4R 4R
0.070 0.070 0.091 0.091 0.091 0.112 0.112 0.133 0.133 0.191 0.191
0.038 0.038 0.065 0.065 0.065 0.075 0.075 0.095 0.095 0.100 0.100
0.028 0.028 0.050 0.050 0.050 0.060 0.060 0.080 0.080 0.085 0.085
0.187 0.211 0.236 0.260 0.285 0.309 0.359 0.408 0.472 0.590 0.708
0.169 0.193 0.217 0.240 0.264 0.287 0.334 0.382 0.443 0.557 0.670
0.078 0.086 0.095 0.103 0.111 0.120 0.137 0.153 0.175 0.216 0.256
0.067 0.075 0.083 0.091 0.099 0.107 0.123 0.139 0.160 0.198 0.237
3/4 13/16 15/16 1 1-1/8 1-1/4 1-3/8 1-5/8 1-13/16 1-13/16 1-7/8
0.036 0.042 0.050 0.050 0.053 0.056 0.062 0.071 0.071 0.083 0.083
0.590 0.670 0.750 0.830 0.910 0.980 1.140 1.300 1.500 1.500 1.500
①,Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
②,Square recesses incorporate a slight taper on the sides of the recess. This taper can result in loss of penetration gaging depth on finished fasteners due to the build up of plating in the recesses. The recess penetration dimensions specified here are for finished (plated) product. Manufacturers should be advised that they should not use all this tolerance in the heading process, or an out-of-tolerance condition could exist after plating.
③,“R" in the recess size tabulation means regular depth recess.
④,No extrusion of excess metal beyond the apex of the point resulting from thread rolling shall be permissible . A slight rounding or truncation of the point is desirable.
⑤,The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
⑥,For screws of norminal lengths equal to or shorter than the nominal screw lengths, L0, listed in Table, the full-form threads shall extend close to the head such that the minor diamter limits of the specified thread are maintained to within Y daistance from the underside of the head, or closer if practicable. Screws of nominal lengths, L0, longer than those tabulated in table shall have a minimum length of full-form thread as shown in the "b Min" column of table, unless otherwise specified by the purchaser.

Similar Standards

1 Metric square recessed flat countersunk tapping screws [Table 11] [ASME]
ASME B 18.6.5M (T11) - 2000
Metric square recessed flat countersunk tapping screws [Table 11]

View Suppliers
2 Metric Type Ill Square-Recessed Flat Countersunk Head Tapping Screws [Table 11] [ASME]
ASME B 18.6.5M (T11) - 2000 (R2010)
Metric Type Ill Square-Recessed Flat Countersunk Head Tapping Screws [Table 11]

View Suppliers
3 Metric square slot pan head tapping screws [Table 19] [ASME]
ASME B 18.6.5M (T19) - 2000
Metric square slot pan head tapping screws [Table 19]
4 Square Recessed Mushroom Head Tapping Screws - Type AB and ABR [ASME]
ASME B 18.6.3 (T25-III+T40) - 2013
Square Recessed Mushroom Head Tapping Screws - Type AB and ABR
5 Metric Type Ill Square-Recessed Pan Head Tapping Screws [Table 19] [ASME]
ASME B 18.6.5M (T19) - 2000 (R2010)
Metric Type Ill Square-Recessed Pan Head Tapping Screws [Table 19]
6 Square recessed raised countersunk head tapping screws - Type AB and ABR [ASME]
ASME B 18.6.3 (T8-III+T40) - 2013
Square recessed raised countersunk head tapping screws - Type AB and ABR
7 Metric Type III square-recessed oval countersunk head tapping screws [ASME]
ASME B 18.6.5M (T15) - 2000 (R2010)
Metric Type III square-recessed oval countersunk head tapping screws
8 Square Recessed Mushroom Head Tapping Screws - Type AB and ABR [ASME]
ASME B 18.6.3 (H7B-III+T1A) - 2024
Square Recessed Mushroom Head Tapping Screws - Type AB and ABR
9 82° Square Recessed Countersunk Head Tapping Screws - Type AB (ABR) [ASME]
ASME B 18.6.3 (T2-III+T40) - 2013
82° Square Recessed Countersunk Head Tapping Screws - Type AB (ABR)
10 Undercut 82-deg Square Recessed Countersunk Head Tapping Screws - Type AB (ABR) [ASME]
ASME B 18.6.3 (H3B-III+T1A) - 2024
Undercut 82-deg Square Recessed Countersunk Head Tapping Screws - Type AB (ABR)
11 Square recessed undercut oval countersunk head tapping screws - Type AB and ABR [ASME]
ASME B 18.6.3 (T12-III+T40) - 2013
Square recessed undercut oval countersunk head tapping screws - Type AB and ABR
12 Cross recessed raised cheese head tapping screws - Type AB and ABR [ASME]
ASME B 18.6.3 (H6B-III+T1A) - 2024
Cross recessed raised cheese head tapping screws - Type AB and ABR
13 Square recessed raised countersunk head tapping screws - Type AB and ABR [ASME]
ASME B 18.6.3 (H2B-III+T1A) - 2024
Square recessed raised countersunk head tapping screws - Type AB and ABR
14 Square Recessed Pan Head Tapping Screws - Type AB and ABR [ASME]
ASME B 18.6.3 (T19-III+T40) - 2013
Square Recessed Pan Head Tapping Screws - Type AB and ABR
15 Square Recessed Raised Cheese Head Tapping Screws - Type AB and ABR [ASME]
ASME B 18.6.3 (T22-III+T40) - 2013
Square Recessed Raised Cheese Head Tapping Screws - Type AB and ABR
16 Square Recessed Countersunk Head Screws (ASTM F837, F468) [ASME]
ASME B 18.6.3 (H1B-III+T1A) - 2024
Square Recessed Countersunk Head Screws (ASTM F837, F468)
17 Square Recessed Round Head Tapping Screws - Type AB and ABR [ASME]
ASME B 18.6.3 (H11B-III+T1A) - 2024
Square Recessed Round Head Tapping Screws - Type AB and ABR
18 Undercut 82-deg Square Recessed Countersunk Head Tapping Screws - Type AB (ABR) [ASME]
ASME B 18.6.3 (T10-III+T40) - 2013
Undercut 82-deg Square Recessed Countersunk Head Tapping Screws - Type AB (ABR)
19 Square recessed undercut oval countersunk head tapping screws - Type AB and ABR [ASME]
ASME B 18.6.3 (H3D-III+T1A) - 2024
Square recessed undercut oval countersunk head tapping screws - Type AB and ABR
20 Square Recessed Pan Head Tapping Screws - Type AB and ABR [ASME]
ASME B 18.6.3 (H5C-III+T1A) - 2024
Square Recessed Pan Head Tapping Screws - Type AB and ABR
21 Hexagon socket cheese head self-tapping screws [WS]
WS 9200 - 2014
Hexagon socket cheese head self-tapping screws