Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [MJ/UNJ] MJ/UNJ threads

Internal Driving

External Driving

Locking Type

Shank

Point

EN 1662 - 1997
Hexagon Bolts with Flange - Small Series View Suppliers
EN 1665 (R) - 1997
Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) View Suppliers
EN 3006 - 1994
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 3007 - 1996
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1665 (S) - 1997
Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) View Suppliers
EN 24018 - 1991
Hexagon Head Screws - Product Grade C
EN 14399-10 (Hexagon Bolt) - 2018
High-Strength Structural Bolting Assemblies for Preloading - System HRC - Bolt HRC with Hexagon Head
EN 13411-5 (A3) - 2003
U-bolt Wire Rope Grips - U-bolt
EN 22340 (B) - 1992
Clevis Pins without Head - Form B
EN 14218 - 2003
Hexagon Nuts with Flange - Fine Pitch Thread
EN 24033 - 1991
Hexagon Nuts, Style 2 - Product Grades A and B
EN 4162 - 2016
Aerospace Series - Screws, 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - 1100 MPa (at Ambient Temperature)/235 °C
EN 27434 - 1992
Slotted Set Screws with Cone Point
EN 28673 - 1991
Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and B
EN 28736 - 1992
Taper Pins with Internal Thread, Unhardened
EN 1663 - 1997
Prevailing Torque Type Hexagon Nuts with Flange (with Non-Metallic Insert)
EN 2944 - 2018
Aerospace Series-Inserts, Screw Thread, Helical Coil, Self-Lockong, In Corrosion Resisting Steel FE-PA3004
EN 24016 - 1991
Hexagon Head Bolls: Product Grade C
EN 14399-3 (Bolt) - 2015
High-strength Structural Bolting Assemblies for Preloading - Part 3: System HR — Hexagon Bolt
EN 14399-5 (Washer) - 2005
High-Strength Structural Bolting Assemblies for Preloading - Part 5: Plain Washers

Previous

1 2 3 4 5 6

Product Category

Stamping Parts

Wing nuts Wing screws Thumb screws

Automotive Bolts

Seat belt bolts, engine screws Hot-dip galvanized non-standard hex head bolts Turned part, battery clamp screws, external hex bolts

Customized Screws

Stainless steel screws Chip-broad screws Machine screws

Customized Washers

Customized flat washers Customized retaining rings Customized auto parts

Bolts

Hexagon bolts Hexagon socket-head cap screws Round head bolts

Rivet Parts

Rivet screws/Rivet studs Blind rivets/Hand-tightened screws Rivet nuts/Copper nuts

Non-standard Fasteners

Non-standard washers Non-standard retaining rings Non-standard pins

Step Screws

Micro screws Thumb screws High quality products

Blind Rivets

Open type blind rivets Closed end blind rivets Stainless steel rivets

Set Screws

Stainless steel Hex. High-strength

Leave a Message