Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [MJ/UNJ] MJ/UNJ threads

Internal Driving

External Driving

Locking Type

Shank

Point

EN 1665 (S) - 1997
Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) View Suppliers
EN 3007 - 1996
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1662 - 1997
Hexagon Bolts with Flange - Small Series View Suppliers
EN 3006 - 1994
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 1665 (R) - 1997
Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) View Suppliers
EN 2327 - 2006
Aerospace Series - Washers, Lock, with Radial Serrations in Alloy Steel, Cadmium Plated for Flight Control Rods
EN 14218 - 2003
Hexagon Nuts with Flange - Fine Pitch Thread
EN 3196 - 1994
Aerospace Series：Nuts, Hexagonal, Self-locking, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated Classification: 1100 Mpa (At Ambient Temperature)/425 °c
EN 14399-9 (HN washer) - 2009
High-strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV — Nut Face Washers (HN)
EN 2874 - 1996
Aerospace Series - Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated - Classfication: 1550 MPa (at Ambient Temperature)/315℃
EN 24017 - 1991
Hexagon Head Screws - Product Grades A and B
EN 28673 - 1991
Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and B
EN 2884 - 2024
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
EN 3626 - 2006
Aerospace Series - Nuts, Hexagon, Self-locking in Steel, Cadmium Plated, MoS2 Lubricated - Classification: 1100 Mpa (At Ambient Temperature)/235 °c
EN 13411-5 (A1) - 2003
U-Bolt Wire Rope Grips
EN 24014 - 1991
Hexagon Head Bolts - Product Grades A and B
EN 14399-7 (Cs bolt) - 2007
High-strength Structural Bolting Assemblies for Preloading - Part 7: System HR — Countersunk Head Bolt
EN 14399-7 (Hexagon Nuts) - 2018
High-Strength Structural Bolting Assemblies for Preloading - Part 7: System HR - Hexagon Nuts
EN 10230-1 (T1) - 2000
Loose Nails for General Applications Pointes - Circular, Flat, Flat Countersunk and Cup Head, Plain Shank Nails
EN 2897 - 1996
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235℃

Previous

1 2 3 4 5 6

Product Category

Rivets

Rivet nuts Rivet studs Rivet screws

High-Quality Stud Bolts

Heat-resistant coarse shank stud bolts Duplex stainless steel coarse shank stud bolts Double-ended stud bolts

Rivet Parts

Rivet screws/Rivet studs Blind rivets/Hand-tightened screws Rivet nuts/Copper nuts

High-pressure Fasteners

Stainless steel expansion screws Double ended studs Special alloy fasteners

Industry-Specific Fasteners

For nuclear power, thermal power, petrochemical industries High-strength, high-hardness, corrosion-resistant stainless steel bolts PTFE-coated studs, high-quality studs and nuts

Set Screws

Stainless steel Hex. High-strength

Nuts

Pal nuts RESS push nuts Slotted round nuts

Rings

E type retaining rings, push nuts for shaft External circlips, internal circlips Retaining clips for shaft, Snap rings for bearings

Precision Parts

Micro screws Thumb screws High quality products

Stamping Parts

Wing nuts Wing screws Thumb screws

Leave a Message