Categories
+ Washers & Retaining Rings

IFI 114-2003
100 deg and 120 deg countersunk head style break mandrel blind rivets
ASME/ANSI B18.30.1M-2000(R2005)
100 Deg And 120 Deg Countersunk Head Style Break Mandrel Blind Rivets (Metric series)
IFI 119-2003
100 Deg and 120 Deg countersunk headstyle structural flush break pull mandrel self-plugging blind rivets 1
IFI 134-2003
100 Deg countersunk head multi-grip flush break pull mandrel self-plugging blind rivets 1
IFI 117-2003
100 Deg countersunk head pull through mandrel blind rivets 1
IFI 130-2003
100 deg countersunk head structural splitting self-plugging pull mandrel blind rivets 1
ASME/ANSI B18.5-2012
114-deg Countersunk Square Neck Bolts,(Inch Series)
ASME/ANSI B18.5-2008
114° Countersunk square neck bolts
IFI 126-2003
120 Deg Countersunk head style break mandrel closed end blind rivets 1
GB 12617-1990
120 Deg Flush Head Break Mandrel Blind Rivets 2
GB 12616-1990
120 Deg Flush Head Break Mandrel Closed And Blind Rivets 3
GB 874-1986
120 Degree Countersunk Head Semi-Tubular Rivets
ASME/ANSI B18.7-2001
120 degree countersunk head semi-tubular rivets
GB 954-1986
120° Degree Countersunk Head Rivets
GB 1012-1986
120° Degree Oval Countersunk Rivets
SAE J492-1968
120°Countersunk head semitubular rivets Table16
GB 974-1976
120°Cross recessed raised countersunk screws
CNS 4419-1981
120°Flat countersunk head short square neck bolts
GB /T17880.4-1999
120°small Countersunk Head Riveted Nuts 3
YJT 1004-2012
120°small countersunk internal and external half hex rivet nuts 2
BS 3575-1963
150 degree countersunk head semi-tubular rivets for break pad 1
ASME/ANSI B18.7-2001
150 degree flat countersunk head semi-tubular rivets
GB /T3763-2008
24° cone connectors and flared couplings - Hexagon thin nut
GB /T3759-2008
24° Cone Connectors-Nut
GB /T17880.2-1999
90° Countersunk Head Riveted Nuts 3
GB /T17880.3-1999
90° Small Countersunk Head Riveted Nuts 3
SAE J492-1968
90°Countersunk head semitubular rivets Table15
DIN 18182-4-1987
Accessories for the installation of gypsum plasterboard Nails
GB /T923-2009
Acorn Hexagon Nuts
JIS B1183-2010
Acorn hexagon nuts
GB /T802.3-2009
Acorn Hexagon Nuts With Flange-Welding Type
GB /T923-1988
Acorn nuts
GB 802-1988
Acorn Nuts
JIS B1181-2001
Acorn nuts with fine pitch-combined type
GB /T802.1-2008
Acorn Nuts-Assembling Type
JIS B1183-1994
Acorn nuts-combined type
JIS B1181-2001
Acorn nuts-combined type
JIS B1183-2010
Acorn nuts—Assembling type
JIS B1181-2001
Acorn nuts,Fine pitch
DIN 705-2007
Adjusting Rings
ASME/ANSI B18.29.1-1993
Aerodynamic installation tools for wire thread insert
EN 3542-1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
EN 4162-2009
Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - 1100 MPa (at ambient temperature)/235 °C
EN 3006-1994
Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C
EN 3009-1998
Aerospace Series,Hexagon head bolts with relieved shank,long thread,in heat resisting nickel base alloy NI-P100HT(Inconel 718),silver plated— Classification: 1275 MPa(at ambient tmperature)/650℃
EN 2874-1996
Aerospace series-bolt,larg bihexagonal head,close tolerance normal shank,medium length thread
EN 3007-1996
Aerospace series-Hexagon head bolts with relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C
EN 3008-1998
Aerospace series-hexagon head Bolts with relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C
EN 2944-1998
Aerospace series-Inserts, screw thread, helical coil, self-lockong, in corrosion resisting steel FE-PA3004
DIN 65438-1993
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa,for temperatures up to 315 ℃
DIN 65517-2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy
DIN 11015-1995
Agricultural machinery - Flat countersunk square neck bolts with short square
DIN 980-1987
All-Metal Prevailing Torque Type Hexagon Nuts 4
NF E25-420-1997(R2002)
All-metal prevailing torque type hexagon nuts, style 2-Property classes 5, 8, 10 and 12
JIS B1199-1-2001
All-metal prevailing torque type nuts
JIS B1199-1-2001
All-metal prevailing torque type nuts-Fine Thread
JIS B1199-1-2001
All-metal prevailing torque type nuts-Thickness
JIS B1199-1-2001
All-metal prevailing torque type nuts-Thin
YJT 9511
Aluminum Flat head with knurled neck rivet nuts
American system washers -SAE 1