ANSI B 18.1.1 - 1972 (R2016) Flat Countersunk Head Rivets


Unit: inch
美标ANSI B18.1.1 - 1972 (R2016) ANSI18.1.1 Flat Countersunk Head Rivets
Screw Thread
d
1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16
d max
min
dk max
min
k Ref.
0.064 0.096 0.127 0.158 0.191 0.222 0.253 0.285 0.316 0.348 0.380 0.411 0.443
0.059 0.090 0.121 0.152 0.182 0.213 0.244 0.273 0.304 0.336 0.365 0.396 0.428
0.118 0.176 0.235 0.293 0.351 0.413 0.469 0.528 0.588 0.646 0.704 0.763 0.823
0.110 0.163 0.217 0.272 0.326 0.384 0.437 0.491 0.547 0.602 0.656 0.710 0.765
0.027 0.040 0.053 0.066 0.079 0.094 0.106 0.119 0.133 0.146 0.159 0.172 0.186
Similar Standards
1 沉头铆钉 (粗制) [GB]
GB 865 - 1986
Countersunk Head Rivets-Black
2 沉头铆钉 [GB]
GB 869 - 1986
Countersunk Head Rivets
Suppliers(1)
3 120°沉头铆钉 [GB]
GB 954 - 1986
120° Degree Countersunk Head Rivets
4 钢制沉头实心铆钉(公称直径10-36毫米) [DIN]
DIN 302 - 2011
Steel Countersunk Head Rivets,with Nominal Diameters From 10 to 36 mm
5 沉头铆钉,公称直径1-8mm [DIN]
DIN 661 - 2011
Countersunk Head Rivets (With Nominal Diameters From 1 to 8 mm)
6 沉头锥端铆钉 - 公称直径3毫米到5毫米 [DIN]
DIN 675 - 2011
Flat Countersunk Head Rivets - Nominal Diameters From 3 to 5 mm
7 沉头实心铆钉 [DIN]
DIN 302 - 1993
Steel countersunk head rivets
8 沉头铆钉 [DIN]
DIN 661 - 1993
Countersunk head rivets (with nominal diameters from 1 to 8 mm)
9 沉头锥端铆钉 [DIN]
DIN 675 - 1993
Flat countersunk head rivets with nominal diameters from 3 to 5 mm
10 沉头冷打实心铆钉 [JIS]
JIS B 1213 - 1995
Countersunk Head Cold-Striking Solid Rivets
11 沉头热打实心铆钉 Table 2 [JIS]
JIS B 1214 - 1995
Countersunk Head Hot Solid Rivets
12 米制沉头铆钉Table5 [ANSI/ASME]
ANSI/ASME B 18.1.3M - 1983 (R1995)
Metric flat countersunk head rivets
13 米制沉头铆钉 [Table 5] [ANSI/ASME]
ANSI/ASME B 18.1.3M - 1983 (R2006)
Metric Flat Countersunk Head Rivets
14 米制冷锻或热锻沉头实心铆钉 Table 6 [BS]
BS 4620 - 1970
Metric Cold Forged 90°Countersunk Head Rivets
15 60°沉头铆钉(直径1/2至1¾英寸) [BS]
BS 275 (-7) - 1927
Standard Rivet - 60° Flat Countersunk Head (½ Inch to 1¾ inch diameter)
16 45°沉头铆钉(直径1/2至1¾英寸) [BS]
BS 275 (-9) - 1927
Standard Rivet - 45° Flat Countersunk Head (½ Inch to 1¾ inch diameter)
17 沉头实心铆钉 table 6 [SAE]
SAE J 492 - 1968
Flat Countersunk Head Rivets
18 沉头实心铆钉 [Table 4] [ANSI]
ANSI B 18.1.2 - 1972 (R2016)
Flat Countersunk Head Rivets (Manufactured Shape)