ISO 13918 (PD) - 2017 Arc Stud Welding - Partially Threaded Stud - Type PD


Unit: mm
国际ISO 13918 (PD) - 2017 ISO13918 13918IS Arc Stud Welding - Partially Threaded Stud - Type PD
Nominal Length L Tips:seclect Nominal Length L and get .
Screw Thread
d
M6 M8 M10 M12 M16 M20 M24
ds max
min
d1 Ref.
h Ref.
L1 ±1
5.45 7.29 9.13 10.96 14.7 18.48 22.15
5.25 7.09 8.93 10.76 14.5 18.28 21.95
8.5 10 12.5 15.5 19.5 24.5 30
3.5 3.5 4 4.5 6 7 10
L+2.1 L+2.2 L+2.3 L+2.8 L+3.5 L+3.8 L+4.5
b
- - - - - - -
①,a°≈140°±7°
②,Length L1 applies to angle 140°only (without tolerance)
Alternative history
Similar Standards
1 PD型电弧焊用焊接螺柱 [GB]
GB /T 902.2 (PD) - 2010
Threaded studs for drawn arc stud welding with ceramic ferrule-PD style
2 RD型电弧焊用焊接螺柱 [GB]
GB /T 902.2 (RD) - 2010
Threaded Studs For Drawn Arc Stud Welding With Ceramic Ferrule-RD Type
3 手工焊用焊接螺柱 [GB]
GB /T 902.1 - 2008
Weld Studs For Manual Welding
4 PT型焊接螺柱 [GB]
GB /T 902.3 (PT) - 2008
Weld Studs For Capacitor Discharge Welding - Type PT
5 储能焊用焊接螺柱 [GB]
GB /T 902.3 (PT) - 1998
Weld studs for capacitor discharge welding
6 手工焊用焊接螺柱 [GB]
GB /T 902.1 - 1989
Weld studs for manual welding
7 机动弧用焊接螺柱 [GB]
GB /T 902.2 - 1989
Weld studs for arc welding
8 焊接螺柱 [DIN]
DIN 525 - 2009
Weld studs
9 单头焊接螺柱 [DIN]
DIN 34828 - 2005
Welding Studs For Turnbuckles
10 气体保护焊焊接柱 快速螺柱焊接用带凹槽螺柱 带凸肩的螺柱(GK) [DIN]
DIN 32500 (-5)1991
Studs For Drawn Arc Stud Welding - Threaded Studs With Shoulder, Short Cycle Processes, GK
11 焊接螺柱 [DIN]
DIN 525 - 1986
Weld studs
12 RD型电弧螺柱焊钉 [ISO]
ISO 13918 (RD) - 2017
Arc Stud Welding - Threaded Stud With Reduced Shaft - Type RD
13 PD型焊钉 [ISO]
ISO 13918 (PD) - 1998
Threaded studs(PD)
14 RD型焊钉 [ISO]
ISO 13918 (RD) - 1998
Threaded stud with reduced shaft(RD)