DIN EN ISO 15483 - 2000 Cross Recessed Raised Contersunk Head Drilling Screws With Tapping Screw Thread


Unit: mm
德标DIN EN ISO 15483 - 2000 DIN EN ISO1548 Cross Recessed Raised Contersunk Head Drilling Screws With Tapping Screw Thread
Nominal Length L Tips:seclect Nominal Length L and get .
Thread Size
ST2.9 ST3.5 ST4.2 ST4.8 ST5.5 ST6.3
P Pitch
a max
dk max
min
f
k max
r max
R
Socket No.
M1
M2
α 0,+2°
Drilling range(sheet or plate thickness) min
max
1.1 1.3 1.4 1.6 1.8 1.8
1.1 1.3 1.4 1.6 1.8 1.8
5.5 7.3 8.4 9.3 10.3 11.3
5.2 6.9 8 8.9 9.9 10.9
0.7 0.8 1 1.2 1.3 1.4
1.7 2.35 2.6 2.8 3 3.15
1.2 1.4 1.6 2 2.2 2.4
6 8.5 9.5 9.5 11 12
1 2 2 2 3 3
3.4 4.8 5.2 5.4 6.7 7.3
3.3 4.8 5.2 5.6 6.6 7.2
90° 90° 90° 90° 90° 90°
0.7 0.7 1.75 1.75 1.75 2
1.9 2.25 3 4.4 5.25 6
Lg(min)
- - - - - -
①,The function of the drill tip (diameter dp) is specified in ISO 10666.
②,Mateial:
a)Case hardening steel or heat treatable steel shall be used
b)Hardness:
The minimum surface hardness of drilling screws after heat treatment shall be 530 HV 0.3; The core hardness after heat treatment shall be: 320 HV 5 to 400 HV 5 for threads ≤ST4.2, 320 HV 10 to 400 HV 10 for threads > ST4.2; According to ISO 10666
Alternative history
Similar Standards
1 十字槽半沉头自钻自攻螺钉 [GB]
GB /T 15856.3 - 2002
Cross Recessed Raised Countersunk Head Self-Drilling Screws With Tapping Screw Thread
2 十字槽半沉头自钻自攻螺钉 [GB]
GB /T 15856.3 - 1995
Cross recessed raised countersunk head self-drilling tapping screws
3 十字槽半沉头钻尾自攻钉 [DIN]
DIN 7504 (R) - 1995
Cross recessed raised contersunk self-drilling tapping screws
4 十字槽半沉头钻尾自攻钉 [DIN]
DIN 7504 (Q) - 1982
Cross recessed raised contersunk self-drilling tapping screws
5 十字槽半沉头钻尾自攻螺钉 [ISO]
ISO 15483 - 1999
Cross Recessed Raised Countersunk Head Self-drilling And Tapping Screws
6 十字槽半沉头钻尾自攻钉 [JIS]
JIS B 1124 - 2003
Cross Recessed Raised Countersunk Head Drilling Screws
7 十字槽半沉头自钻自攻螺钉 [NF]
NF E 25-859 - 1999
Cross Recessed Raised Countersunk Head Drilling Screws With Tapping Screws Thread