ANSI/ASME B 18.6.3 - 2013 80° Slotted Flat Countersunk Head Screws [Table 1]


Unit: inch
美标ANSI/ASME B18.6.3 - 2013 ANSI/ASME18.6 80° Slotted Flat Countersunk Head Screws [Table 1]
Thread Size
d
0000# 000# 00# 0# 1# 2# 3# 4# 5# 6# 7# 8# 10# 12#
d Nominal Size
PP UNC
L
dk max
min
k Ref
n max
min
t max
min
0.0210 0.0340 0.0470 0.0600 0.0730 0.0860 0.0990 0.1120 0.1250 0.1380 0.1510 0.1640 0.1900 0.2160
/ / / / 64.0 56.0 48.0 40.0 40.0 32.0 / 32.0 24.0 24.0
/ / / 1/8 1/8 1/8 1/8 3/16 3/16 3/16 / 1/4 5/16 3/8
0.040 0.060 0.087 0.112 0.137 0.162 0.187 0.212 0.237 0.262 0.287 0.312 0.362 0.412
0.035 0.055 0.080 0.096 0.120 0.144 0.167 0.191 0.215 0.238 0.262 0.285 0.333 0.380
0.011 0.016 0.028 0.035 0.043 0.051 0.059 0.067 0.075 0.083 0.091 0.100 0.116 0.132
0.008 0.011 0.017 0.023 0.026 0.031 0.035 0.039 0.043 0.048 0.048 0.054 0.060 0.067
0.004 0.007 0.010 0.016 0.019 0.023 0.027 0.031 0.035 0.039 0.039 0.045 0.050 0.056
0.007 0.009 0.014 0.015 0.019 0.023 0.027 0.030 0.034 0.038 0.041 0.045 0.053 0.060
0.003 0.005 0.009 0.010 0.012 0.015 0.017 0.020 0.022 0.024 0.027 0.029 0.034 0.039
Thread Size
d
14# 1/4 16# 18# 5/16 20# 24# 3/8 7/16 1/2 9/16 5/8 3/4
d Nominal Size
PP UNC
L
dk max
min
k Ref
n max
min
t max
min
0.2420 0.2500 0.2680 0.2940 0.3125 0.3200 0.3720 0.3750 0.4375 0.5000 0.5625 0.6250 0.7500
/ 20.0 / / 18.0 / / 16.0 14.0 13.0 12.0 11.0 10.0
/ 7/16 / / 1/2 / / 9/16 5/8 3/4 / / /
0.462 0.477 0.512 0.561 0.597 0.611 0.711 0.717 0.760 0.815 0.932 1.050 1.285
0.427 0.442 0.475 0.522 0.556 0.569 0.664 0.670 0.715 0.765 0.878 0.990 1.215
0.148 0.153 0.164 0.180 0.191 0.196 0.228 0.230 0.223 0.223 0.260 0.298 0.372
0.075 0.075 0.075 0.084 0.084 0.084 0.094 0.094 0.094 0.106 0.118 0.133 0.149
0.064 0.064 0.064 0.072 0.072 0.072 0.081 0.081 0.081 0.091 0.102 0.116 0.131
0.068 0.070 0.075 0.083 0.088 0.090 0.105 0.106 0.103 0.103 0.120 0.137 0.171
0.044 0.046 0.049 0.054 0.058 0.059 0.069 0.070 0.066 0.065 0.077 0.088 0.111
①,Edge of head may be rounded or flat.
②,Screws of these lengths and shorter shall have undercut heads.
③,7#, 14#, 16#, 18#, 20#, 24# are for tapping screws only.
④,0000#, 000#, 00#, 9/16, 5/8, 3/4 are for machine screws only.
⑤,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread.
⑥,Machine Screw Length of Thread
1) Sizes No.5 and smaller.
Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the
bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have
full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer
nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in.
2) Sizes No.6 and smaller.
Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the
bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have
full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer
nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.
Similar Standards
1 开槽沉头螺钉 [GB]
GB /T 68 - 2000
Slotted Countersunk Head Screws (Commen Head Style)
Suppliers(1)
2 开槽沉头螺钉 [GB]
GB /T 68 - 2016
Slotted Countersunk Flat Head Screws
Suppliers(1)
3 开槽沉头不脱出螺钉 [GB]
GB 948 - 1988
Slotted Countersunk Head Screws With Waisted Shank
4 米制开槽沉头机械螺钉  Table 2 [IFI]
IFI 513 - 1982
Metric Slotted Flat Countersunk Head Machine Screws
5 开槽沉头螺钉 [DIN]
DIN 963 - 1990
Slotted Countersunk Head Screws
Suppliers(1)
6 开槽沉头(平头)螺钉 - 适用于精密机械;M0.4至M1.4 [DIN]
DIN 8245 - 1972
Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
7 钢结构栓连接用开槽沉头螺钉 [DIN]
DIN 7969 - 1989
Slotted countersunk head screws for structural steel bolting for supply with or without nuts
8 开槽沉头螺钉(通用头型) - 产品等级A级 [ISO]
ISO 2009 - 2011
Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A
9 开槽沉头螺钉(通用头型) - 产品等级A级 [ISO]
ISO 2009 - 1994
Slotted Countersunk Flat Head Screws (common Head Style) - Product Grade A
10 开槽沉头螺钉 [Table 3] [JIS]
JIS B 1101 - 1996
Slotted Countersunk Head Screws [Table 3]
11 开槽沉头螺钉 (精制) [JIS]
JIS B 1179 - 1994
Slotted Flat Head Bolts, Fine Finished
12 开槽沉头螺钉  (粗制) [JIS]
JIS B 1179 - 1994
Slotted Flat Head Bolts, Rough Finished
13 开槽沉头螺钉 [Attached Table 2] [JIS]
JIS B 1101 - 1996
Slotted Countersunk Head Screws [Attached Table 2]
14 开槽沉头螺钉 表8 [JIS]
JIS B 1101 - 2017
Slotted Countersunk Head Screws - Table 8
15 开槽沉头螺钉 表JA.4 [JIS]
JIS B 1101 - 2017
Slotted Countersunk Head Screws - Table JA.4
16 精密机械用开槽沉头螺钉 [JIS]
JIS B 1116 - 2009
Slotting Countersunk Head Screws For Fine Mechanics
17 82°十字槽沉头螺钉 [Table 2] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
82° Cross Recessed Countersunk Head Screws
18 米制开槽沉头螺钉Table2 [ASME/ANSI]
ANSI/ASME B 18.6.7M - 1998
Metric soltted countersunk screws
19 80°开槽沉头螺钉Table1 [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2010
80° Slotted flat countersunk head machine screws
20 100°开槽沉头螺钉Table3 [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2010
Slotted 100 deg flat countersunk head screws (machine screws only)
21 紧公差100°开槽沉头螺钉Table5 [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2010
Close Tolerance 100 Degree Slotted Countersunk Head Screws
22 80°开槽沉头清根螺钉Table9 [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2010
80° Slotted undercut 82-deg flat countersunk head machine screws
23 开槽沉头螺钉 [ASME/ANSI]
ANSI/ASME B 18.6.2 - 1998
Slotted flat countersunk head screws
24 开槽100°沉头小螺钉 [Table 3] [ASME/ANSI]
ANSI/ASME B 18.11 - 1961 (R1983)
Slotted 100°flat head miniature screws
25 100°沉头开槽机械螺钉 [Table 3] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Dimensions of Slotted 100-deg Flat Countersunk Head Screws (Machine Screws Only)
26 开槽精密100°沉头机械螺钉 [Table 5] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Dimensions of Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
27 开槽82°沉头清根螺钉 [ Table 9 ] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Dimensions of Undercut 82-deg Flat Countersunk Head Screws
28 开槽100°沉头小螺钉 [Table 3] [ASME/ANSI]
ANSI/ASME B 18.11 - 1961 (R2017)
Slotted 100°flat head miniature screws
29 沉头螺钉的凹槽型式 【Table 2】 [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Recess Dimensions for Flat Countersunk Head Screws
30 100°沉头开槽机械螺钉的凹槽型式 [Table 4] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only)
31 开槽精密100°沉头机械螺钉凹槽型式 [Table 6] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
32 开槽82°沉头清根螺钉凹槽型式  [table 10] [ASME/ANSI]
ANSI/ASME B 18.6.3 - 2013
Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws
33 开槽沉头螺钉 [NF]
NF E 25-123 - 1994
Slotted Countersunk Flat Head Screws - Product Grade A
34 BSW/BSF开槽沉头螺钉 [BS]
BS 450 - 1958
Slotted 90°Countersunk Head Screws
35 开槽沉头螺钉(短的)Table 6 [BS]
BS 1981 - 1991
Slotted Truncated Countersunk Head Screws: Short Length
36 开槽沉头螺钉Table4 [BS]
BS 1981 - 1991
Slotted Countersunk Flat Head Screws
37 米制开槽沉头螺钉 [AS]
AS /NZS 1427 - 1996
ISO metric slotted countersunk head screws
38 精密用开槽沉头螺钉 M0.4~M1.4 [CNS]
CNS 4363 - 1980
Slotted Countersunk Head Screws For Fine Mechanics
39 开槽沉头螺钉 [CNS]
CNS 4411 - 1981
Slotted Countersunk Head Screws
40 精密机械用开槽沉头螺钉 [CNS]
CNS 9678 - 1982
Slotted Countersunk Screws For Fine Mechanics
41 开槽沉头螺钉(通用头型) A级 [DIN EN ISO]
DIN EN ISO 2009 - 2011
Slotted Countersunk Flat Head Screws(Common Head Style)-Product Grade A
Suppliers(1)