Click Specification

(Non-preferred) dimensions in parentheses.

Square Washers

CNS 155 - 1994

Display drawing:

Nominal Diameter

(14)

(18)

(22)

(27)

(33)

(39)

d	min=nominal size
	max
s	Small washer	max=nominal size
		min
h	Small washer	Nominal Size
		max
		min
s	Large washer	max=nominal size
		min
h	Large washer	Nominal Size
		max
		min

6.6	9	11	14	16	18	20	22	24	26	30	33	36	39	42
7.2	9.6	11.7	14.7	16.7	18.7	20.8	22.8	24.8	26.8	30.8	34	37	40	43
17	23	28	35	40	45	52	56	64	68	73	-	-	-	-
15.9	21.7	26.7	33.4	38.4	43.4	50.1	54.1	62.1	66.1	71.1	-	-	-	-
1.2	1.6	1.6	2.3	3.2	3.2	4.5	4.5	4.5	6	6	-	-	-	-
1.4	1.8	1.8	2.6	3.6	3.6	5	5	5	6.7	6.7	-	-	-	-
1	1.4	1.4	2	2.8	2.8	4	4	4	5.3	5.3	-	-	-	-
20	26	32	40	44	52	55	62	68	72	80	90	100	110	115
18.7	24.7	30.4	38.4	42.4	50.1	53.1	60.1	66.1	70.1	78.1	87.8	97.8	107.8	112.8
2.3	2.3	2.3	3.2	3.2	4.5	4.5	6	6	6	6	6	8	8	8
2.6	2.6	2.6	3.6	3.6	5	5	6.7	6.7	6.7	6.7	6.7	8.7	8.7	8.7
2	2	2	2.8	2.8	4	4	5.3	5.3	5.3	5.3	5.3	7.3	7.3	7.3

Send Inquiry

Similar Standards

1	[DIN] DIN 435 - 1989	Square Taper Washers for use with 1 Sections
2	[DIN] DIN 6319 (D) - 2001	Spherical Washers, Conical Seats - Type D
3	[DIN] DIN 434 - 1990	Square Taper Washers for use with Channel Sections
4	[ASME/ANSI] ASME/ANSI B 18.23.1 - 1967 (R1975)	Square Beveled Washers (Steel) [Type B]
5	[DIN] DIN 435 - 2024	Square Taper Washers for I-Sections
6	[DIN] DIN 434 - 2024	Square Taper Washers for U-sections
7	[ASME] ASME B 18.2.6 - 2010	Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F 436)
8	[DIN] DIN 434 - 2000	Square Taper Washers for U-sections
9	[ASME/ANSI] ASME/ANSI B 18.23.1 - 1967 (R1975)	Square Beveled Washers (Malleable Iron) [Type A]
10	[DIN] DIN 436 - 2024	Square Washers; Especially for Wood Constructions
11	[DIN] DIN 6917 - 1989	Square Taper Washers for High-Strength Structural Bolting of Steel I Sections
12	[ASME] ASME B 18.2.6 - 2006	Hardened Beveled Washers with Slope or Taper In Thichness 1:16 (ASTM F 436)
13	[DIN] DIN 6918 - 1990	Square Taper Washers for High-strength Structual Bolting of Steel Channel Sections
14	[ASME] ASME B 18.2.6 - 2019	Hardened Beveled Washers with Slope or Taper in Thickness 1:6 (ASTM F436 / F436M)
15	[DIN] DIN 435 - 2000	Square Taper Washers for Use with I Sections
16	[DIN] DIN 436 - 1990	Square Washers; Especially for Wood Constructions
17	[JIS] JIS B 1256 (SQ) - 1978	Square Washers
18	[BS] BS 4395-1 - 1969	Metric Square Taper Washers
19	[GB] GB 852 - 1988	Square Taper Washers for I Section
20	[BS] BS 3410 (-12) - 1961	Square or D-shaped Taper Washers [Table 12]
21	[UNI] UNI 6598 - 2002	Channel Clamping Plates for UNP Section (Inclination 8％)
22	[BS] BS 3410 (-11) - 1961	Square Black Washers with Round Holes [Table 11]
23	[GB] GB /T 853 - 1988	Square Taper Washers for Slot Section
24	[JIS] JIS B 1256 (SQ) - 2008	Square Washers [Table JA.1.]
25	[ASTM] ASTM F 436 - 2010	Square Hardened Beveled Washers
26	[ASTM] ASTM F 436 - 2011	Hardened Beveled Washers
27	[ASTM] ASTM F 436M - 2019	Metric Hardened Beveled Washers
28	[CNS] CNS 156 - 1994	Square Taper Washers with Double Slots for Channel
29	[CNS] CNS 157 - 1994	Square Taper Washers for 工 Steel with Single Slot
30	[CNS] CNS 4646 - 1983	Square Taper Washers with Single Slot for High Strength Bolts Connection for Steel Structure
31	[CNS] CNS 4647 - 1983	Square Taper Washers for High Prestressed Channels
32	[KS] KS B 1326 (T10) - 2021	Square Washers
33	[KS] KS 1326 (T4) - 2009	Square Washers
34	[ASTM] ASTM F 436 - 2019	Hardened Beveled Washers, Inch Washers
35	[IS] IS 6649 (B / C) - 1985	Square Taper Washers for use with Channels (6° Taper) Type B, and use with I-beams (8° Taper) Type C
36	[IS] IS 5372 - 1975 (R2001)	Taper Washers for Channels ( ISMC )