BS 4933 - 1973 Metric 120°Countersunk Head Square Neck Bolts


Unit: mm
英标BS 4933 - 1973 BS4933 4933BS Metric 120°Countersunk Head Square Neck Bolts
Screw Thread
d
M5 M6 M8 M10 M12 M16 M20 M24
P Pitch
ds max
min
dk max
min
k max
min
s max
min
0.8 1 1.25 1.5 1.75 2 2.5 3
5.48 6.48 8.58 10.58 12.7 16.7 20.84 24.84
4.52 5.52 7.42 9.42 11.3 15.3 19.16 23.16
11.25 13.5 18 22.5 27 36 45 54
8.65 10.38 13.84 17.3 20.76 27.68 34.6 41.52
4.25 4.75 6.25 7.9 9.4 12.1 15.1 17.6
3.5 4 5.5 7 8.5 11 14 16.5
5.48 6.48 8.58 10.58 12.7 16.7 20.84 24.84
4.52 5.52 7.42 9.42 11.3 15.3 19.16 23.16
①,if L≤125mm时,then b=2d+6;
if 125<L≤200mm时,then b=2d+12;
if L>200mm时,then b=2d+25;
②,Standard nominal lengths are not specified in this standard, it may however, as a result of experience of usage,be possible to include these details at a future revision.
Similar Standards
1 沉头方颈螺栓 [GB]
GB /T 10 - 2013
Countersunk Head Square Neck Bolts
2 沉头方颈螺栓 [GB]
GB /T 10 - 1988
Flat Countersunk Square Neck Bolts
3 沉头方颈螺栓 [GB]
GB 10 - 1976
Countersunk head square neck bolts
4 土方机械沉头方颈螺栓 [GB]
GB /T 21934 - 2008
Earth-Moving Machinery - Plough Bolt
5 短方颈沉头螺栓 [DIN]
DIN 608 - 2010
Flat Countersunk Head Square Neck Bolts With Short Square
Suppliers(1)
6 沉头矮方颈螺栓 [DIN]
DIN 608 - 2007
Flat Countersunk Short Square Neck Bolts,With Short Square
Suppliers(1)
7 沉头方颈螺栓 [DIN]
DIN 608 - 1981
Flat Countersunk Square Neck Bolts With Short Square
Suppliers(1)
8 120°沉头高方颈螺栓 [DIN]
DIN 605 - 2010
Flat Countersunk Head Square Neck Bolts With Long Square
9 沉头方颈螺栓 [DIN]
DIN 605 - 1981
Flat countersunk head square neck bolts with long square
10 英制114°沉头方颈螺栓 [Table 8] [ANSI/ASME]
ANSI/ASME B 18.5 - 2012
114-deg Countersunk Square Neck Bolts,(Inch Series)
11 3号沉头方颈螺栓(标准头)[Table 1] [ANSI/ASME]
ANSI/ASME B 18.9 - 2012
No.3 Regular Head Plow Bolts (Round, Countersunk, Square Neck)
12 3号沉头方颈螺栓(修正头)[Table 1] [ANSI/ASME]
ANSI/ASME B 18.9 - 2012
No.3 Repair Head Plow Bolts (Round, Countersunk, Square Neck)
13 沉头方颈螺栓 [ANSI/ASME]
ANSI/ASME B 18.5 - 2008
114° Countersunk square neck bolts
14 大沉头方颈螺栓(皮带螺栓) [ANSI/ASME]
ANSI/ASME B 18.5 - 2008
Flat countersunk head elevator bolts
15 大沉头方颈螺栓Table9 [ANSI/ASME]
ANSI/ASME B 18.5 - 2008
Large Countersunk Square Neck Bolts
16 沉头方颈螺栓 [ANSI/ASME]
ANSI/ASME B 18.9 - 2007
Plow Bolts(Round,Countersunk,Square Neck)
17 C级90°沉头方颈螺栓 [UNI]
UNI 6104 - 1975
Flat Countersunk Square Neck Bolts - Grade C
18 米制90°沉头方颈螺栓 [BS]
BS 4933 - 1973
Metric 90°Countersunk Square Bolts
19 粗制沉头方颈螺栓Table5 [BS]
BS 325 - 1947
Black Countersunk Square Neck Bolts For Iron
20 110°沉头方颈螺栓Table6 [BS]
BS 325 - 1947
Black Counersunk Square Neck Bolts For Woodwork
21 沉头方颈螺栓 [CNS]
CNS 4418 - 1981
Countersunk Head Square Neck Bolt
22 120°沉头矮方颈螺栓 [CNS]
CNS 4419 - 1981
120°Flat Countersunk Head Short Square Neck Bolts