1 |
![]() |
[ASME]
ASME B 18.8.2 - 2020 |
Taper Pins |
2 |
![]() |
[EN]
EN 22339 - 1992 |
Taper Pins Unhardened |
3 |
![]() |
[DIN]
DIN 1 - 1981 |
Taper Pins with Round End |
4 |
![]() |
[DIN EN]
DIN EN 22339 - 1992 |
Taper Pins with Round End |
5 |
![]() |
[ASME]
ASME B 18.8.2 - 2000 (R2010) |
Taper Pins [Table1] |
6 |
![]() |
[JIS]
JIS B 1352 - 1988 |
Taper Pins |
7 |
![]() |
[UNI]
UNI 129 |
Taper Pins, Unhardened |
8 |
![]() |
[NF]
NF E 25-752 - 1992 (R2002) |
Taper Pins, Unhardened |
9 |
![]() |
[GB]
GB /T 117 - 2000 |
Taper Pins |
10 |
![]() |
[JIS]
JIS B 1352 - 1988 |
Taper Pins |
11 |
![]() |
[GB]
GB 117 - 1986 |
Taper Pins |
12 |
![]() |
[UNI]
UNI 7283 - 1974 |
Taper Pins |
13 |
![]() |
[GOST]
GOST 3129 - 1970 |
Taper Pins |
①,Type A (ground pins) : Surface finish Ra = 0.8μm Type B (turned pins) : Surface finish Ra = 3.2μm ②,R=a/2+d+(0.02*L)²/8a ③,Other tolerances, for example, a11, c11, f8, as agreed betweeen customer and supplier. |