About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Miniature screw threads : Profiles , general plan and basic dimensions

GB /T 15054.1 - 2018

Send Inquiry

Similar Standards

1 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits [DIN]
DIN 2510-2 - 1971 		Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
2 Limits of sizes for general purpose external and internal screw threads [ISO]
ISO 965-2 - 1998 		Limits of sizes for general purpose external and internal screw threads
3 Metric triangle lock with thread end [IFI]
IFI 502 - 1982 		Metric triangle lock with thread end
4 Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws [ASME]
ASME B 18.6.3 (T4.3.2.1) - 2024 		Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws
5 Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.1.2-1) - 2024 		Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
6 Type AB, Thread Forming Tapping Screws [Table 5] [ASME]
ASME B 18.6.4 (AB) - 1998 (R2005) 		Type AB, Thread Forming Tapping Screws [Table 5]
7 Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T41) - 2013 		Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
8 Typ C, Thread Forming Tapping Screws [Table V1] [ASME]
ASME B 18.6.4 (C) - 1998 (R2005) 		Typ C, Thread Forming Tapping Screws [Table V1]
9 self-tapping teeth-B [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		self-tapping teeth-B
10 Whitworth pipe threads for pipe unions [DIN]
DIN 3858 - 2005 		Whitworth pipe threads for pipe unions
11 Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths [ISO]
ISO 888 - 2012 		Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths
12 Threads and thread ends for tapping screws [DIN]
DIN 7970 - 1984 		Threads and thread ends for tapping screws
13 Type A, Thread Forming Tapping Screws [Table E1] [ASME]
ASME B 18.6.4 (A) - 1998 (R2005) 		Type A, Thread Forming Tapping Screws [Table E1]
14 Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.1.1-1) - 2024 		Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws
15 Symmetrical thread HC [Figure 4] [ISO]
ISO 9268 (F4) - 1988 		Symmetrical thread HC [Figure 4]
16 Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.1.4-1) - 2024 		Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
17 ISO general purpose metric screw threads - General plan [ISO]
ISO 261 - 1998 		ISO general purpose metric screw threads - General plan
18 Deviations for constructional screw threads [ISO]
ISO 965-3 - 1998 		Deviations for constructional screw threads
19 Type B and BP, Thread Forming Tapping Screws [Table 6] [ASME]
ASME B 18.6.4 (B/BP) - 1998 (R2005) 		Type B and BP, Thread Forming Tapping Screws [Table 6]
20 Thread and thread ends for wood screws [DIN]
DIN 7998 - 1975 		Thread and thread ends for wood screws
21 Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws [ASME]
ASME B 18.6.3 (T4.3.1-1) - 2024 		Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws
22 Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468) [ASME/ANSI]
ASME/ANSI B 18.31.3 - 2009 		Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)
23 Aerospace - Lead and runout threads - Part 1: Rolled external threads [ISO]
ISO 3353-1 - 2020 		Aerospace - Lead and runout threads - Part 1: Rolled external threads
24 Wood thread [Table 1] [ASME/ANSI]
ASME/ANSI B 18.6.1 (T1) - 1997 		Wood thread [Table 1]
25 ISO general-purpose metric screw threads─Basic dimensions [ISO]
ISO 724 - 1993 		ISO general-purpose metric screw threads─Basic dimensions
26 Lag screw threads [Table 16] [ASME/ANSI]
ASME/ANSI B 18.2.1 (T16) - 2010 		Lag screw threads [Table 16]
27 Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T47) - 2013 		Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws
28 Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T42) - 2013 		Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
29 Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T46) - 2013 		Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws
30 HB Thread [Figure 4] [ISO]
ISO 5835 (F4) - 1991 		HB Thread [Figure 4]
31 Asymmetrical thread HD [Figure 6] [ISO]
ISO 9268 (F6) - 1988 		Asymmetrical thread HD [Figure 6]
32 Thread and body dimeters for wood screws [Table 1] [ASME/ANSI]
ASME/ANSI B 18.6.1 (T1) - 1981 (R2016) 		Thread and body dimeters for wood screws [Table 1]
33 ISO inch screw threads─Basic dimensions [ISO]
ISO 725 - 2009 		ISO inch screw threads─Basic dimensions
34 Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T40) - 2013 		Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws
35 Self-tapping teeth-BF [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		Self-tapping teeth-BF
36 HA Thread [Figure 2] [ISO]
ISO 5835 (F2) - 1991 		HA Thread [Figure 2]
37 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data [ISO]
ISO 965-1 - 2013 		ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
38 Pipe threads where pressure-tight joints are not made on the threads [ISO]
ISO 228-1 - 2000 		Pipe threads where pressure-tight joints are not made on the threads
39 Triangle lock self-tapping teeth--D、F、G [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		Triangle lock self-tapping teeth--D、F、G
40 AB self-tapping teeth [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		AB self-tapping teeth
41 ISO - Metric Trapezoidal Screw Threads [DIN]
DIN 103 - 1 - 1977 		ISO - Metric Trapezoidal Screw Threads
42 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation [ISO]
ISO 7-1 - 1994 		Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
43 Wood thread [Table 1] [ASME/ANSI]
ASME/ANSI B 18.6.1 (T1) - 1981 		Wood thread [Table 1]
44 Tapping Screws Thread [ISO]
ISO 1478 - 1999 		Tapping Screws Thread
45 ISO metric trapezoidal screw threads - Basic and design profiles [ISO]
ISO 2901 - 2016 		ISO metric trapezoidal screw threads - Basic and design profiles
46 Metric Self-tapping Thread End [IFI]
IFI 502 - 1982 		Metric Self-tapping Thread End
47 Plastic threads [DIN]
DIN 7505 - 1986 		Plastic threads
48 Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation [EN]
EN 10226-1 - 2004 		Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
49 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts [ISO]
ISO 262 - 1998 		ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
50 Specification for wood screws [GB]
GB /T 922 - 1986 		Specification for wood screws
51 Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983) [GB]
GB /T 3 - 1997 		Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)
52 The interference-fit threads [GB]
GB /T 1181 - 1998 		The interference-fit threads
53 Tapping screws thread [GB]
GB /T 5280 - 2002 		Tapping screws thread
54 General purpose metric screw threads - Limit deviations [GB]
GB /T 2516 - 2003 		General purpose metric screw threads - Limit deviations
55 General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan [GB]
GB /T 9146 - 2003 		General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan
56 Dryseal pipe threads with the thread angle of 60 degrees [GB]
GB /T 27944 - 2011 		Dryseal pipe threads with the thread angle of 60 degrees
57 Pipe threads where pressure-tight joints are made on the threads [GB]
GB 7306 - 1987 		Pipe threads where pressure-tight joints are made on the threads
58 Thread and point details for Type Y thread cutting screws [TABLE 6] [BS]
BS 4174 - 1972 		Thread and point details for Type Y thread cutting screws [TABLE 6]
59 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994） [GB]
GB /T 7306.2 - 2000 		Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）
60 Trapezoidal screw threads - Part 1: Profiles [GB]
GB /T 5796.1 - 2005 		Trapezoidal screw threads - Part 1: Profiles
61 General purpose metric screw threads - Limits of sizes [GB]
GB /T 15756 - 2008 		General purpose metric screw threads - Limits of sizes
62 General purpose metric screw threads - Basic dimenslons [GB]
GB /T 196 - 2003 		General purpose metric screw threads - Basic dimenslons
63 Internal thread for wire thread inserts [GB]
GB /T 24425.5 - 2009 		Internal thread for wire thread inserts
64 The threads for transition fit [GB]
GB 1167 - 1996 		The threads for transition fit
65 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 1995 		Tapping Screw Threads and Ends
66 Tapping screw threads and ends [JIS]
JIS B 1125 (1) - 2003 		Tapping screw threads and ends
67 General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan [GB]
GB /T 9145 - 2003 		General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan
68 Parallel screw threads of Whitworth form Requirements [BS]
BS 84 - 2007 		Parallel screw threads of Whitworth form Requirements
69 Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles [GB]
GB /T 13576.1 - 2008 		Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles
70 Screws thread shanks for thread forming screw-Metric coarse thread series [GB]
GB /T 6559 - 1986 		Screws thread shanks for thread forming screw-Metric coarse thread series
71 Unified screw threads - General plan [GB]
GB /T 20670 - 2006 		Unified screw threads - General plan
72 Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads [GB]
GB /T 7307 - 2001 		Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads
73 Taper pipe threads [JIS]
JIS B 0203 - 1999 		Taper pipe threads
74 General purpose metric screw threads - The plan for pipe systems [GB]
GB /T 1414 - 2003 		General purpose metric screw threads - The plan for pipe systems
75 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 2015 		Tapping Screw Threads and Ends
76 Metric threads where pressure-tight joints are made on the threads [GB]
GB /T 1415 - 2008 		Metric threads where pressure-tight joints are made on the threads
77 General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD） [GB]
GB /T 192 - 2003 		General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）
78 Locking threads with 30 degree wedge ramp [GB]
GB /T 37462 - 2019 		Locking threads with 30 degree wedge ramp
79 General purpose metric screw threads - Preferable plan [GB]
GB /T 9144 - 2003 		General purpose metric screw threads - Preferable plan
80 The blank diameters for rolling general purpose metric screw threads [GB]
GB /T 18685 - 2017 		The blank diameters for rolling general purpose metric screw threads
81 Thread and point details for Type A threads [TABLE 23] [BS]
BS 4174 - 1972 		Thread and point details for Type A threads [TABLE 23]
82 Limit gauges for metric screw threads [JIS]
JIS B 0251 - 2008 		Limit gauges for metric screw threads
83 General purpose metric screw threads - Tolerances [GB]
GB /T 197 - 2018 		General purpose metric screw threads - Tolerances
84 Limits of sizes and tolerances for metric coarse screw threads [JIS]
JIS B 0209 - 1997 		Limits of sizes and tolerances for metric coarse screw threads
85 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994） [GB]
GB /T 7306.1 - 2000 		Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）
86 Screw Threads - UNJ Profile, Inch [SAE]
SAE AS 8879 - 2001 		Screw Threads - UNJ Profile, Inch
87 Screw Threads for Thread Forming Tapping Screws - Dimensions [IS]
IS 5957 - 2003 		Screw Threads for Thread Forming Tapping Screws - Dimensions
88 ISO general purpose metric screw threads - General plan [IS]
IS 4218 (-2) - 2001 		ISO general purpose metric screw threads - General plan
89 Threaded insert, coated with precote 80 microcapsules recommended lengths [YJT]
YJT 5028 		Threaded insert, coated with precote 80 microcapsules recommended lengths
90 US triangle lock thread-S type [Others]
1025 		US triangle lock thread-S type
91 Metric triangle lock thread-S type [Others]
1026 		Metric triangle lock thread-S type
92 Metric triangle lock thread-C type [Others]
1027 		Metric triangle lock thread-C type
93 Metric triangle lock thread-B type [Others]
1028 		Metric triangle lock thread-B type
94 Metric triangle lock thread-P type [Others]
1029 		Metric triangle lock thread-P type