BS 275 (-7) - 1927 Standard Rivet - 60° Flat Countersunk Head (½ Inch to 1¾ inch diameter)


Unit: inch
Nominal Diameter
d
1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8
d mm
dk Inch
s Inch
12.700 14.288 15.875 17.463 19.050 20.638 22.225 23.813 25.400 26.988 28.575
3/4 27/32 15/16 1 1/32 1 1/8 1 7/32 1 5/16 1 13/32 1 1/2 1 19/32 1 11/16
1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16
Nominal Diameter
d
1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4
d mm
dk Inch
s Inch
30.163 31.750 33.338 34.925 36.513 38.100 39.688 41.275 42.863 44.450
1 25/32 1 7/8 1 31/32 2 1/16 2 5/32 2 1/4 2 11/32 2 7/16 2 17/32 2 5/8
19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8
Similar Standards
1 沉头铆钉 (粗制) [GB]
GB 865 - 1986
Countersunk Head Rivets-Black
2 沉头铆钉 [GB]
GB 869 - 1986
Countersunk Head Rivets
Suppliers(1)
3 120°沉头铆钉 [GB]
GB 954 - 1986
120° Degree Countersunk Head Rivets
4 钢制沉头实心铆钉(公称直径10-36毫米) [DIN]
DIN 302 - 2011
Steel Countersunk Head Rivets,with Nominal Diameters From 10 to 36 mm
5 沉头铆钉,公称直径1-8mm [DIN]
DIN 661 - 2011
Countersunk Head Rivets (With Nominal Diameters From 1 to 8 mm)
6 沉头锥端铆钉 - 公称直径3毫米到5毫米 [DIN]
DIN 675 - 2011
Flat Countersunk Head Rivets - Nominal Diameters From 3 to 5 mm
7 沉头实心铆钉 [DIN]
DIN 302 - 1993
Steel countersunk head rivets
8 沉头铆钉 [DIN]
DIN 661 - 1993
Countersunk head rivets (with nominal diameters from 1 to 8 mm)
9 沉头锥端铆钉 [DIN]
DIN 675 - 1993
Flat countersunk head rivets with nominal diameters from 3 to 5 mm
10 沉头冷打实心铆钉 [JIS]
JIS B 1213 - 1995
Countersunk Head Cold-Striking Solid Rivets
11 沉头热打实心铆钉 Table 2 [JIS]
JIS B 1214 - 1995
Countersunk Head Hot Solid Rivets
12 米制沉头铆钉Table5 [ANSI/ASME]
ANSI/ASME B 18.1.3M - 1983 (R1995)
Metric flat countersunk head rivets
13 米制沉头铆钉 [Table 5] [ANSI/ASME]
ANSI/ASME B 18.1.3M - 1983 (R2006)
Metric Flat Countersunk Head Rivets
14 米制冷锻或热锻沉头实心铆钉 Table 6 [BS]
BS 4620 - 1970
Metric Cold Forged 90°Countersunk Head Rivets
15 45°沉头铆钉(直径1/2至1¾英寸) [BS]
BS 275 (-9) - 1927
Standard Rivet - 45° Flat Countersunk Head (½ Inch to 1¾ inch diameter)
16 沉头实心铆钉 table 6 [SAE]
SAE J 492 - 1968
Flat Countersunk Head Rivets
17 沉头实心铆钉 [Table 2] [ANSI]
ANSI B 18.1.1 - 1972 (R2016)
Flat Countersunk Head Rivets
18 沉头实心铆钉 [Table 4] [ANSI]
ANSI B 18.1.2 - 1972 (R2016)
Flat Countersunk Head Rivets (Manufactured Shape)