Material

GB /T 13829.1 (A) - 1992 Grooved pin, full length parallel grooved with pilot

Unit: mm

国标GB /T13829.1 (A) - 1992 GB13829.1 1382 Grooved pin, full length parallel grooved with pilot

Size

Φ1.5

Φ2

Φ2.5

Φ3

Φ4

Φ5

Φ6

Φ8

Φ10

Φ12

Φ16

Φ20

Φ25

d	max=nominal size
	min
b	max
	min
Minimum Double Shear,kN

1.5	2	2.5	3	4	5	6	8	10	12	16	20	25
1.475	1.975	2.475	2.975	3.97	4.97	5.97	7.964	9.964	11.957	15.957	19.948	24.948
2	2	2.5	2.5	3	3	4	4	5	5	5	7	7
1	1	1.5	1.5	2	2	3	3	4	4	4	6	6
1.6	2.84	4.4	6.4	11.3	17.6	25.4	45.2	70.4	101.8	181	283	444

Alternative history

GB /T 13829.1(A) - 1992 GB /T 13829.1 - 2004

Similar Standards

1	[GB] GB /T 13829.1 - 2004	Grooved Pin, Full Length Parallel Grooved With Pilot
2	[GB] GB /T 13829.2 - 2004	Grooved Pin, Full Length Parallel Grooved With Chamfer
3	[GB] GB /T 13829.3 - 2004	Grooved pins-One-third-length centre grooved
4	[GB] GB /T 13829.1 (B) - 1992	Grooved Pins-Full-Length Parallel Grooved, With Chamferw
5	[GB] GB /T 13829.1 (C) - 1992	Grooved Pins-One-Third-Length Centre Grooved
6	[GB] GB /T 13829.4 - 2004	Grooved Pins - Half-Length Centre Grooved
7	[GB] GB /T 13829.1 (D) - 1992	Grooved Pins - Half-Length Centre Grooved
8	[DIN] DIN 1469 - 2012	Grooved Pins, Half Length Grooved With Gorge
9	[DIN] DIN 1469 - 2011	Grooved pins, Half length grooved with gorge
10	[DIN] DIN 1469 - 1978	Grooved Pins, Half Length Grooved With Gorge
11	[DIN] DIN 1473 - 1978	Grooved Pins, Full Length Parallel Grooved With Chamfer Suppliers(1)
12	[DIN] DIN 1475 - 1978	Grooved pins - 1/3 Length Centre Grooved Suppliers(1)
13	[DIN] DIN 1470	Grooved pin, full length parallel grooved with pilot
14	[ISO] ISO 8739 - 1997	Grooved Pins-Full-Length Parallel Grooved, With Pilot
15	[ISO] ISO 8740 - 1997	Grooved Pins-Full-Length Parallel Grooved, With Chamfer
16	[ISO] ISO 8742 - 1997	Grooved Pins-One-Third-Length Centre Grooved
17	[ISO] ISO 8743 - 1997	Grooved Pins-Half-Length Centre Grooved
18	[ANSI/ASME] ANSI/ASME B 18.8.2 - 2000 (R2005)	Grooved pins—type F, L
19	[ANSI/ASME] ANSI/ASME B 18.8.100M - 2000 (R2005)	Grooved pins metric series with half-length grooved
20	[ANSI/ASME] ANSI/ASME B 18.8.100M - 2000 (R2005)	Metric grooved pins, full-length parallel grooved-metric series
21	[ANSI/ASME] ANSI/ASME B 18.8.100M - 2000 (R2005)	Metric grooved pins with one third length groove in the middle
22	[ANSI/ASME] ANSI/ASME B 18.8.100M - 2000 (R2005)	Metric grooved pins—half-length centre grooved
23	[ANSI/ASME] ANSI/ASME B 18.8.2 - 2000 (R2005)	Grooved Pins—Type H
24	[ANSI/ASME] ANSI/ASME B 18.8.2 - 2000 (R2005)	Grooved Pins—Type E
25	[NF] NF E 25-750 - 1997	Grooved Pins. Half Length Centre Grooved
26	[NF] NF E 25-761 - 1997	Grooved Pins — Full-length Parallel Grooved, With Pilot
27	[NF] NF E 25-763 - 1997 (R2002)	Grooved Pins. One-Third-Length Centre Grooved
28	[NF] NF E 25-772 - 1997 (R2002)	Grooved Pins. Full Length Paralled Grooved, With Chamfer
29	[DIN EN ISO] DIN EN ISO 8739 - 1998	Grooved Pin, Full Length Parallel Grooved With Pilot
30	[DIN EN ISO] DIN EN ISO 8740 - 1998	Grooved Pins. Full-Length Parallel Grooved,With Chamfer Suppliers(1)
31	[DIN EN ISO] DIN EN ISO 8742 - 1998	Grooved Pins - 1/3 Length Centre Grooved Suppliers(1)
32	[DIN EN ISO] DIN EN ISO 8743 - 1998	Grooved Pins -- Half-Length Centre Grooved