JIS B 1214 - 1995 Cheese Head Rivets


Unit: mm
Nominal Diameter
d
Φ10 Φ12 Φ13 Φ14 Φ16 Φ18 Φ19 Φ20 Φ22
d max
min
dk max
min
k max
min
r max
10.6 12.6 13.6 14.6 16.6 18.8 19.8 20.8 22.8
10 12 13 14 16 18 19 20 22
16.5 19.5 21.55 22.55 26.55 29.55 30.6 32.6 35.6
15.75 18.75 20.7 21.7 25.7 28.7 29.65 31.65 34.65
7.6 8.6 9.6 10.6 11.6 13.3 14.3 14.8 16.3
7 8 9 10 11 12.5 13.5 14 15.5
0.5 0.6 0.65 0.7 0.8 0.9 0.95 1 1.1
Nominal Diameter
d
Φ24 Φ25 Φ27 Φ28 Φ30 Φ32 Φ33 Φ36 Φ40
d max
min
dk max
min
k max
min
r max
24.8 25.8 27.8 28.8 31 33 34 37 41
24 25 27 28 30 32 33 36 40
38.7 40.7 43.7 45.7 48.7 51.7 54.7 58.8 64.8
37.6 39.6 42.6 44.6 47.6 50.6 53.6 57.5 63.5
17.9 18.4 19.9 20.4 21.9 23.4 23.9 26 29
17 17.5 19 19.5 21 22.5 23 25 28
1.2 1.25 1.35 1.4 1.5 1.6 1.65 1.8 2
Similar Standards
1 平锥头铆钉 (粗制) [GB]
GB 864 - 1986
Cone Head Rivets-Black
2 平锥头铆钉 [GB]
GB 868 - 1986
Cone Head Rivets
3 盘头铆钉(直径1/2至1¾英寸) [BS]
BS 275 (-4) - 1927
Standard Rivet - Pan Head (½ Inch to 1¾ inch diameter)
4 盘头锥颈铆钉(直径1/2至1¾英寸) [BS]
BS 275 (-5) - 1927
Standard Rivet - Pan Head with Tappered Neck (½ Inch to 1¾ inch diameter)
5 圆锥头实心铆钉 [Table 3] [ANSI]
ANSI B 18.1.2 - 1972 (R2016)
Cone Head Rivets (Manufactured Shape)
6 盘头实心铆钉 [Table 6] [ANSI]
ANSI B 18.1.2 - 1972 (R2016)
Pan Head Rivets (Manufactured Shape)