Categories

+ Bolts & Studs
+ Nuts
+ Pins
+ Rigging & Tools
+ Rivets
+ Screws
+ Washers & Retaining Rings
+ Welds
+ Anchors

Narrow by:

DINx
Previous
1 2 3 4 5 6 7 8 9 10
Next
Accessories for the installation of gypsum plasterboard Nails DIN 18182-4-1987
Accessories for the installation of gypsum plasterboard Nails
Adjusting Rings DIN 705-2007
Adjusting Rings
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa,for temperatures up to 315 ℃ DIN 65438-1993
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa,for temperatures up to 315 ℃
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy DIN 65517-2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy
Agricultural machinery - Flat countersunk square neck bolts with short square DIN 11015-1995
Agricultural machinery - Flat countersunk square neck bolts with short square
All-Metal Prevailing Torque Type Hexagon Nuts DIN 980-1987
All-Metal Prevailing Torque Type Hexagon Nuts

4

Ball knobs [Type C] DIN 319-1978
Ball knobs [Type C]
Belt screws DIN 15237-1980
Belt screws
Bolted Connections With Reduced Shank Hexagon Nuts DIN 2510-5-1971
Bolted Connections With Reduced Shank Hexagon Nuts
Bolted Connections With Reduced Shank; Extension Sleeves DIN 2510-7-1971
Bolted Connections With Reduced Shank; Extension Sleeves
Bolts and Screws for T-slots DIN 787-2005
Bolts and Screws for T-slots
Brake and clutch lining rivets DIN 7338(A)-1993
Brake and clutch lining rivets
Brake And Clutch Lining Rivets DIN 7338(A)-2011
Brake And Clutch Lining Rivets
Brake and clutch lining rivets,semitubular rivet DIN 7338(B)-1993
Brake and clutch lining rivets,semitubular rivet

1

Brake And Clutch Lining Rivets,Semitubular Rivet DIN 7338(B)-2011
Brake And Clutch Lining Rivets,Semitubular Rivet

1

Brake and clutch lining rivets,tubular rivet DIN 7338(C)-1993
Brake and clutch lining rivets,tubular rivet

1

Brake And Clutch Lining Rivets,Tubular Rivet DIN 7338(C)-2011
Brake And Clutch Lining Rivets,Tubular Rivet

1

Break manderl blind rivets ,countersunk head DIN 7337-1991
Break manderl blind rivets ,countersunk head

3

Break manderl blind rivets ,flat head DIN 7337-1991
Break manderl blind rivets ,flat head

2

Break Manderl Blind Rivets ,Flat Head DIN EN ISO 15977-2011
Break Manderl Blind Rivets ,Flat Head

2

Cap nuts for use with bolts with waisted shank DIN 2510-6-1974
Cap nuts for use with bolts with waisted shank
Chamfered Hexagon Thin Nuts—Product Grades A and B DIN 439(-2)-1987
Chamfered Hexagon Thin Nuts—Product Grades A and B

1

Chamfered Hexagon Thin Nuts—Product Grades A and B DIN EN ISO 4035-2013
Chamfered Hexagon Thin Nuts—Product Grades A and B

1

Chamfered Plain Washers For Use In Structural Steelwork DIN 34820-2004
Chamfered Plain Washers For Use In Structural Steelwork

1

Cheese head screws with 12 point socket DIN 34821-2005
Cheese head screws with 12 point socket
Cheese head screws with flange with 12 point socket DIN 34822-2005
Cheese head screws with flange with 12 point socket
Clevis Pins with Head DIN 1444-1974
Clevis Pins with Head
Clevis pins with head and stud end DIN 1445-1977
Clevis pins with head and stud end
Clevis Pins with Head and Threaded Portion DIN 1445-2011
Clevis Pins with Head and Threaded Portion
Clevis Pins With Small Head; Finish M DIN 1434-1977
Clevis Pins With Small Head; Finish M
Clip bolts DIN 6378-1974
Clip bolts
Closed insert nuts for plastics mouldings-hex with shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-hex with shoulder
Closed insert nuts for plastics mouldings-hex without shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-hex without shoulder
Closed insert nuts for plastics mouldings-round without shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-round without shoulder
Closed insert nuts for plastics mouldings-round without shoulder DIN 16903-1991
Closed insert nuts for plastics mouldings-round without shoulder
Closed insert nuts with disc for plastics mouldings-hex with shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-hex with shoulder
Closed insert nuts with disc for plastics mouldings-hex without shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-hex without shoulder
Closed insert nuts with disc for plastics mouldings-round with shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-round with shoulder
Closed insert nuts with disc for plastics mouldings-round without shoulder DIN 16903-1991
Closed insert nuts with disc for plastics mouldings-round without shoulder
Components for liftig,towing,lashing—Shackle,bow-Stainless steels DIN 82103-1987
Components for liftig,towing,lashing—Shackle,bow-Stainless steels
Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels DIN 82101-1987
Components for liftig,towing,lashing—Shackle,dee-Non-alloy quality steels
Conical nut(F) DIN 74361-2-F-1982
Conical nut(F)
Conical Nut(F) DIN 74361-2-F-2008
Conical Nut(F)
Conical Seat—Type D DIN 6319 D-2001
Conical Seat—Type D
Conical Seat—Type G DIN 6319 G-2001
Conical Seat—Type G
Conical Spring Washers For Bolted Connections DIN 6796-2009
Conical Spring Washers For Bolted Connections

4

Conical spring washers for screw and washer assemblies DIN 6908-1990
Conical spring washers for screw and washer assemblies

2

Conical Spring Washers For Screw And Washer Assemblies DIN 6908-1995
Conical Spring Washers For Screw And Washer Assemblies

2

Conical Spring Washers- Series B DIN 2093-2013
Conical Spring Washers- Series B

2

Conincal Spring Washers Bor Bolt/Nut Assemblies DIN 6796-1987
Conincal Spring Washers Bor Bolt/Nut Assemblies

4

Countersunk bolts with double nip for Railway vehicles - Class C DIN 25195-2003
Countersunk bolts with double nip for Railway vehicles - Class C
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8 DIN EN ISO 7046-1-2011
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8

2

Countersunk head double nibs bolts for agricultural machinery DIN 11014-1968
Countersunk head double nibs bolts for agricultural machinery
Countersunk Head Grooved Pins DIN 1477-1978
Countersunk Head Grooved Pins
Countersunk head rivets (with nominal diameters from 1 to 8 mm) DIN 661-1993
Countersunk head rivets (with nominal diameters from 1 to 8 mm)
Countersunk Head Rivets (With Nominal Diameters From 1 to 8 mm) DIN 661-2011
Countersunk Head Rivets (With Nominal Diameters From 1 to 8 mm)
Crooved Pins, Half Length Taper Grooved DIN 1472
Crooved Pins, Half Length Taper Grooved
Crooved Pins, Half-Length Taper Grooved DIN EN ISO 8745-1998
Crooved Pins, Half-Length Taper Grooved
Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer DIN 6900-1-1990
Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer
Cross Pan Head Screw And Washer Assemblies,coarse Threaded Screws With Captive Plain Washer DIN EN ISO 10644-1998
Cross Pan Head Screw And Washer Assemblies,coarse Threaded Screws With Captive Plain Washer
Previous
1 2 3 4 5 6 7 8 9 10
Next