| 1 |
|
[ISO]
ISO 10069-2 - 2008
|
Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories
|
| 2 |
|
[DIN]
DIN 522 - 1990
|
metal washers; technical delivery conditions
|
| 3 |
|
[EN]
EN 10204 - 2004
|
Metallic products - Types of inspection documents
|
| 4 |
|
[DIN]
DIN 267-27 - 2024
|
Fasteners - Part 27: Steel screws, bolts and studs made of steel with pre-adhesive coating - Technical specifications
|
| 5 |
|
[DIN]
DIN 1543 - 1981
|
Steel flat products; Hot rolled plate 3 to 150 mm thick; Permissible deviations of dimension, weight and form
|
| 6 |
|
[EN]
EN 14592 - 2022
|
Timber structures - Dowel-type fasteners - Requirements
|
| 7 |
|
[DIN]
DIN 1544 - 1975
|
Flat products of steel; cold rolled steel strip; dimensions, tolerances on dimensions and form.
|
| 8 |
|
[ASME]
ASME B 18.6.3 (DATA-G) - 2013
|
General data for machine screws and tapping screws
|
| 9 |
|
[EN]
EN 2943 - 1998
|
Aerospace series - Inserts, screw thread, helical coil, self locking - Technical specification
|
| 10 |
|
[EN]
EN 1515 (-3) - 2005
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
|
| 11 |
|
[EN]
EN 1515 (-2) - 2001
|
Flanges and their joints - bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
|
| 12 |
|
[ISO]
ISO 4107 - 2023
|
Commercial vehicles - Wheel-hub attachment dimensions
|
| 13 |
|
[EN]
EN 1515 (-1) - 1999
|
Flanges and their joints - bolting - Part 1: Selection of bolting
|
| 14 |
|
[EN]
EN 2945 - 1998
|
Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure
|
| 15 |
|
[ISO]
ISO 7789 - 2007
|
Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
|
| 16 |
|
[EN]
EN 2583 - 2019
|
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification
|
| 17 |
|
[EN]
EN 14399-1 (requirements) - 2015
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements
|
| 18 |
|
[GB]
GB 943 - 1988
|
Procurement Specification For Self-Locking Nuts
|
| 19 |
|
[GB]
GB /T 1239.1 - 2009
|
Cold coiled helical springs technical specifications - Part 1: Extension spring
|
| 20 |
|
[GB]
GB /T 121 - 1986
|
Specifications for pins
|
| 21 |
|
[GB]
GB /T 152.3 - 1988
|
Counterbores for hexagon socket head and slotted cheese head screws
|
| 22 |
|
[GB]
GB /T 5779.1 - 2000
|
Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements
|
| 23 |
|
[GB]
GB /T 1239.2 - 2009
|
Cold coiled helical springs technical specifications - Part 2: Compressions spring
|
| 24 |
|
[GB]
GB /T 3633 - 1995
|
Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
|
| 25 |
|
[GB]
GB /T 16938 - 2008
|
Fasteners - General requirements for bolts,screws,studs and nuts
|
| 26 |
|
[GB]
GB /T 1163 - 1989
|
Oil level indicators technical specification
|
| 27 |
|
[GB]
GB /T 32076.1 - 2015
|
High-strength structural bolting assemblies for preloading - Part 1: General requirements
|
| 28 |
|
[GB]
GB /T 9130 - 2007
|
Specification of metallic ring-joint gaskets for steel pipe flanges
|
| 29 |
|
[GB]
GB /T 2259 - 1991
|
Specifications for parts and units of jigs and fixtures
|
| 30 |
|
[GB]
GB /T 959.1 - 2017
|
Specifications for retaining rings-Circlips
|
| 31 |
|
[GB]
GB /T 5779.2 - 2000
|
Fasteners-Surface discontinuities - Nuts
|
| 32 |
|
[GB]
GB /T 23934 - 2015
|
Hot formed helical compression springs - Technical Requirement
|
| 33 |
|
[GB]
GB /T 90.2 - 2002
|
Fasteners - Marking and packaging
|
| 34 |
|
[GB]
GB /T 5653 - 2008
|
Flared couplings - Specification
|
| 35 |
|
[GB]
GB /T 20118 - 2017
|
Steel wire ropes for general purposes
|
| 36 |
|
[GB]
GB /T 43655 - 2024
|
Self-tappingscrew connections - Specification ofthepilotholediameterand tighteningtorque
|
| 37 |
|
[GB]
GB /T 1231 - 2006
|
Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures
|
| 38 |
|
[GB]
GB /T 5286 - 2001
|
Plain Washers for Bolts, Screws and Nuts - General Plan
|
| 39 |
|
[GB]
GB /T 15855.3 - 1995
|
Specifications For Drive Rivets
|
| 40 |
|
[GB]
GB /T 94.4 - 2017
|
Specifications for spring washers - Conical spring washers
|
| 41 |
|
[GB]
GB /T 41487 - 2022
|
Composite sealing gasket material
|
| 42 |
|
[GB]
GB /T 3287 - 1982
|
Technical requirements of malleable cast iron pipe fittings
|
| 43 |
|
[GB]
GB /T 3765 - 2008
|
24° Cone Connectors - Specification
|
| 44 |
|
[GB]
GB /T 24425.6 - 2009
|
Specification For Wire Thread Inserts
|
| 45 |
|
[GB]
GB /T 1231 (Specifications) - 2024
|
Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures
|
| 46 |
|
[GB]
GB /T 548 - 1996
|
Technical requirements for anchors
|
| 47 |
|
[GB]
GB /T 959.3 - 1986
|
Spcifications for ring - Cutting rings
|
| 48 |
|
[GB]
GB /T 13384 - 2008
|
General specifications for packing of mechanical and electrical product
|
| 49 |
|
[GB]
GB /T 5779.3 - 2000
|
Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements
|
| 50 |
|
[GB]
GB 98 - 1988
|
Specification for tab washer
|
| 51 |
|
[GB]
GB /T 1159 - 1989
|
Grease nipples and lubricating cups technical specification
|
| 52 |
|
[SAE]
SAE J 78 - 1998
|
Steel Self-Drilling Tapping Screws
|
| 53 |
|
[SAE]
SAE J 2295 - 1998
|
Fastenersart - Standard - Cap Screws, Hex Bolts, and Hex Nuts
|
| 54 |
|
[ASTM]
ASTM A 394 - 2008 (R2015)
|
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
|
| 55 |
|
[IS]
IS 1367 (-1) - 2002
|
Technical Supply Conditions For Threaded Steel Fasteners - Part 1 General Requirements For Bolts, Screws And Studs
|
| 56 |
|
[Others]
API 20E - 2017
|
Alloy and Carbon Steel Bolting for Use in the Petroleum and Natural Gas Industries
|
