Click Specification

Oval 82-deg Countersunk Trim Head Screws [Table 15] (ASTM F837 / F468)

ASME B 18.6.3 (T15) - 2013

Display drawing:

Download CAD Model

Thread Size
d

4#
(3)

5#
(4)

6#
(4)

6#
(5)

8#
(5)

8#
(6)

10#
(8)

12#
(8)

12#
(10)

1/4
(10)

1/4
(12)

5/16
(12)

5/16
(5/16)

3/8
(3/8)

d	Nominal Size
PP
Code	Head Size
d_s	max
	min
d_k	max
	min
k	Ref
f	Ref.
R	Ref.
L₁	min
α	max
	min
Socket No.
M₁	short	Ref.
	Long	Ref.
M₂	short	Ref.
	Long	Ref.
P	short, Type I	max
		min
	Long, Type I	max
		min
	short, Type IA	max
		min
	Long, Type IA	max
		min

0.1120	0.1250	0.1380	0.1380	0.1640	0.1640	0.1900	0.2160	0.2160	0.2500	0.2500	0.3125	0.3125	0.3750
40	40	32	32	32	32	24	24	24	20	20	18	18	16
3	4	4	5	5	6	8	8	10	10	12	12	5/16	3/8
0.112	0.125	0.138	0.138	0.164	0.164	0.190	0.216	0.216	0.250	0.250	0.312	0.312	0.375
0.106	0.119	0.131	0.131	0.157	0.157	0.181	0.207	0.207	0.240	0.240	0.302	0.302	0.364
0.187	0.212	0.212	0.237	0.237	0.262	0.312	0.312	0.362	0.362	0.412	0.412	0.477	0.597
0.167	0.191	0.191	0.215	0.215	0.238	0.285	0.285	0.333	0.333	0.380	0.380	0.442	0.556
0.057	0.066	0.058	0.075	0.060	0.076	0.094	0.078	0.111	0.091	0.124	0.087	0.130	0.173
0.033	0.037	0.037	0.041	0.041	0.045	0.076	0.076	0.060	0.060	0.068	0.068	0.079	0.099
0.014	0.017	0.017	0.019	0.019	0.021	0.025	0.025	0.029	0.029	0.033	0.033	0.038	0.048
0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062	0.062
82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°	82°
80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°	80°
1	1	1	2	2	2	2	2	2	2	3	3	3	4
0.118	0.130	0.130	0.152	0.152	0.172	0.186	0.186	0.202	0.202	0.264	0.264	0.284	0.384
0.118	0.130	0.130	0.162	0.162	0.188	0.200	0.200	0.214	0.214	0.264	0.264	0.264	0.384
0.118	0.130	0.130	0.152	0.152	0.172	0.186	0.186	0.202	0.202	0.264	0.264	0.284	0.384
0.118	0.130	0.130	0.162	0.162	0.188	0.200	0.200	0.214	0.214	0.264	0.264	0.284	0.384
0.074	0.087	0.087	0.074	0.074	0.094	0.108	0.108	0.126	0.126	0.135	0.135	0.156	0.218
0.057	0.070	0.070	0.050	0.050	0.069	0.084	0.084	0.102	0.102	0.111	0.111	0.131	0.194
0.074	0.087	0.087	0.085	0.085	0.110	0.124	0.124	0.137	0.137	0.135	0.135	0.156	0.218
0.057	0.070	0.070	0.061	0.061	0.085	0.099	0.099	0.112	0.112	0.111	0.111	0.131	0.194
0.074	0.086	0.086	0.074	0.074	0.093	0.108	0.108	0.125	0.125	0.135	0.135	0.155	0.215
0.058	0.070	0.070	0.056	0.056	0.075	0.090	0.090	0.107	0.107	0.117	0.117	0.137	0.197
0.074	0.086	0.086	0.084	0.084	0.109	0.122	0.122	0.136	0.136	0.135	0.135	0.155	0.215
0.058	0.070	0.070	0.066	0.066	0.091	0.104	0.104	0.118	0.118	0.117	0.117	0.137	0.197

①,Edge of head may be rounded or flat.
②,Short machine screws include nominal lengths up to and including 1 1/8 in. for sizes No.5 and smaller, and 2 in. for sizes No.6 and larger.
③,Machine Screw Length of Thread

1) Sizes No.5 and smaller.

Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in.

2) Sizes No.6 and smaller.

Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.
⑦,Machine Screw Length of Thread

1) Sizes No.5 and smaller.

Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in.

2) Sizes No.6 and smaller.

Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.

Alternative history

ASME B 18.6.3T15 - 2013 ASME B 18.6.3H4C - 2024

Send Inquiry

Similar Standards

1	[ISO] ISO 7047 - 1994	Countersunk Rasied Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A View Suppliers
2	[DIN EN ISO] DIN EN ISO 7047 - 2011	Raised Countersunk Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A View Suppliers
3	[ISO] ISO 7047 - 2011	Rasied Countersunk Head Screws(Common Head Style) ，Grade A View Suppliers
4	[DIN] DIN 966 - 1990	Cross Recessed Raised Countersunk Head Screws View Suppliers
5	[GB] GB /T 13806.1 (C) - 1992	Cross Recessed Raised Countersunk Head Screws for Fine Mechanics View Suppliers
6	[GB] GB /T 820 - 2015	Raised Countersunk Head Screws with Cross Recess View Suppliers
7	[GB] GB /T 820 - 2000	Raised Countersunk Head Screws (Common Head Style) with Cross Recess View Suppliers
8	[GB] GB 820 - 1985	Cross Recessed Raised Countersunk Head Screws View Suppliers
9	[ASME] ASME B 18.6.3 (T8-I/T8-IA) - 2013	Cross Recessed Raised Countersunk Head Screws - Type I and IA [Table 7 & 8]
10	[ASME] ASME B 18.6.3 (T12-I/T12-IA) - 2013	Undercut Oval 82-deg Countersunk Head Screws, Type I & Type IA Recess
11	[ASME] ASME B 18.6.3 (H4C) - 2024	Oval 82-deg Countersunk Trim Head Screws (ASTM F837/F468) [TABLE 2.2.4-3,-4 I/IA]
12	[ASME] ASME B 18.6.3 (H3D-I/H3D-IA) - 2024	Undercut Oval 82-deg Countersunk Head Screws, Type I & Type IA Recess [TABLE 2.2.3-4 I/IA]
13	[DIN] DIN 6929 (NE) - 2013	Raised Countersunk Head Screws
14	[ASME/ANSI] ASME/ANSI B 18.6.7M - 1998	Metric PZ Drives Raised Countersunk Head Screws
15	[ASME] ASME B 18.6.3 (H2B-I/H2B-IA) - 2024	Cross Recessed Raised Countersunk Head Screws - Type I and IA [TABLE 2.2.2-2 I/IA]
16	[ASME/ANSI] ASME/ANSI B 18.6.3 (T8) - 2010	80° Cross Recessed Raised Countersunk Head Screws
17	[ASME/ANSI] ASME/ANSI B 18.6.7M - 1998	Metric Cross Recessed Raised Countersunk Screws
18	[BS] BS 1981 - 1991	Recessed Raised Countersunk Head Machine Screws: Short Length
19	[UNI] UNI EN ISO 7047 - 2012	Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A
20	[JIS] JIS B 1111 (T12) - 2017	Cross Recessed Raised Countersunk Head Screws [Table 12]
21	[GB] GB 974 - 1976	120° Cross Recessed Raised Countersunk Screws
22	[NF] NF E 25-120 - 1994	Cross Recessed Raised Countersunk Head Screws, with Type H or Type Z Cross Recessed - Product Grade A
23	[JIS] JIS B 1111 (JA5) - 2017	Cross Recessed Raised Countersunk Head Screws
24	[JIS] JIS B 1111 (T4) - 1996	Cross Recessed Raised Countersunk Head Screws [table 4]
25	[JIS] JIS B 1111 (T4) - 2006	Cross Recessed Raised Countersunk Head Screws [table 4]
26	[BS] BS 450 - 1958	Recessed 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
27	[JIS] JIS B 1119 (2PC) - 1986	Spectacle Frames - Cross-recessed Slotted Pan Countersunk Machine Screws
28	[BS] BS 1981 - 1991	Recessed Raised Countersunk Head Machine Screws
29	[GOST] GOST 17474 - 1980	Raised Countersunk Head Screws (Cross Recessed), Product Grades A and B
30	[AS] AS /NZS 1427 - 1996	ISO Metric Cross-Recess Raised Countersunk Screws [Table 2]
31	[CNS] CNS 4561 - 1981	Cross Recessed Raised Countersunk Head Screws
32	[KS] KS B 1023 (T9) - 2016 (R2021)	Cross Recessed Raised Countersunk Head Screws
33	[KS] KS B 1023 (T4) - 2001	Cross Recessed Raised Countersunk Head Screws