ASME B 18.6.3 - 2013 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)


Unit: inch
美标ASME B18.6.3 - 2013 ASME18.6.3 18.6.3A 82° Slotted Undercut Oval Countersunk Head Machine Screws  [table 11] (ASTM F837 / F468)
Thread Size
d
0# 1# 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 7/16 1/2
d Nominal Size
PP UNC
L
dk max
min
k Ref
f Ref.
n max
min
t max
min
0.0600 0.0730 0.0860 0.0990 0.1120 0.1250 0.1380 0.1640 0.1900 0.2160 0.2500 0.3125 0.3750 0.4375 0.5000
- 64 56 48 40 40 32 32 24 24 20 18 16 14 13
1/8 1/8 1/8 1/8 3/16 3/16 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4
0.112 0.137 0.162 0.187 0.212 0.237 0.262 0.312 0.362 0.412 0.477 0.597 0.717 0.760 0.815
0.096 0.120 0.144 0.167 0.191 0.215 0.238 0.285 0.333 0.380 0.442 0.556 0.670 0.715 0.765
0.025 0.031 0.036 0.042 0.047 0.053 0.059 0.070 0.081 0.092 0.107 0.134 0.161 0.156 0.156
0.021 0.025 0.029 0.033 0.037 0.041 0.045 0.052 0.060 0.068 0.079 0.099 0.117 0.122 0.131
0.023 0.026 0.031 0.035 0.039 0.043 0.048 0.054 0.060 0.067 0.075 0.084 0.094 0.094 0.106
0.016 0.019 0.023 0.027 0.031 0.035 0.039 0.045 0.050 0.056 0.064 0.072 0.081 0.081 0.091
0.028 0.034 0.040 0.047 0.053 0.059 0.065 0.078 0.090 0.103 0.119 0.149 0.179 0.184 0.204
0.022 0.027 0.033 0.038 0.043 0.048 0.053 0.064 0.074 0.085 0.098 0.124 0.149 0.154 0.169
①,Edge of head may be rounded or flat.
②,Screws of these lengths and shorter shall have undercut heads.
④,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread.
⑤,Machine Screw Length of Thread
1) Sizes No.5 and smaller.
Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the
bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have
full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer
nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in.
2) Sizes No.6 and smaller.
Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the
bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have
full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer
nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.
Alternative history
Similar Standards
1 开槽半沉头螺钉 [GB]
GB /T 69 - 2016
Slotted Raised Countersunk Head Screws
Suppliers(1)
2 十字槽半沉头螺钉 [GB]
GB /T 820 - 2015
Raised Countersunk Head Screws With Cross Recess
Suppliers(1)
3 开槽半沉头螺钉 [GB]
GB /T 69 - 2000
Countersunk Slotted Raised Head Screws (Common Head Style)
Suppliers(1)
4 开槽半沉头螺钉 [GB]
GB 69 - 1985
Slotted Raised Countersunk Head Screws
Suppliers(1)
5 开槽半沉头不脱出螺钉 [GB]
GB 949 - 1988
Slotted Raised Countersunk Head Screws With Waisted Shank
6 米制开槽半沉头机械螺钉  Table 4 [IFI]
IFI 513 - 1982
Metric Slotted Oval Countersunk Head Machine Screws
7 开槽半沉头螺钉 [DIN]
DIN 964 - 1990
Slotted Raised Countersunk Head Screws
8 开槽半沉头圆柱端螺钉 [DIN]
DIN 924 - 2012
Slotted Raised Countersunk Head Screws With Dog Point
9 开槽半沉头圆柱端螺钉 [DIN]
DIN 924 - 2006
Slotted Raised Countersunk Head Screws With Dog Point
10 一字槽半沉头螺钉(普通头型).产品等级A [ISO]
ISO 2010 - 2011
Slotted Raised Countersunk Head Screws - Product Grade A
11 开槽半沉头螺钉(通用头型) 产品等级A级 [ISO]
ISO 2010 - 1994
Countersunk slotted raised head screws (common head style); product grade A
12 开槽半沉头螺钉 表10 [JIS]
JIS B 1101 - 2017
Slotted Raised Countersunk Head Screws - Table 10
13 开槽半沉头螺钉 表JA.5 [JIS]
JIS B 1101 - 2017
Slotted Raised Countersunk Head Screws - Table JA.5
14 精密机械用开槽半沉头螺钉 [JIS]
JIS B 1116 - 2009
Slotted Raised Countersunk Head Screws For Fine Mechanics
15 开槽半沉头螺钉 [Table 4] [JIS]
JIS B 1101 - 1996
Slotted Raised Countersunk Head Screws [Table 4]
16 开槽半沉头螺钉 [Attached Table 3] [JIS]
JIS B 1101 - 1996
Slotted Raised Countersunk Head Screws [Attached Table 3]
17 开槽半沉头螺钉Table7 [ANSI/ASME]
ANSI/ASME B 18.6.3 - 2010
Slottted Oval Countersunk Head Machine Screws
18 80°开槽半沉头清根螺钉Table11 [ANSI/ASME]
ANSI/ASME B 18.6.3 - 2010
80° Slotted undercut oval countersunk head machine screws
19 米制开槽半沉头螺钉Table6 [ANSI/ASME]
ANSI/ASME B 18.6.7M - 1998
Metric slotted raised countersunk head screws
20 82°半沉头螺钉凹槽型式 [Table 8] [ANSI/ASME]
ANSI/ASME B 18.6.3 - 2013
Recess Dimensions for Oval 82° Countersunk Head Screws
21 82°半沉头清根螺钉凹槽型式  [table 12] [ANSI/ASME]
ANSI/ASME B 18.6.3 - 2013
Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws
22 开槽半沉头螺钉 [NF]
NF E 25-124 - 1994
Slotted Raised Countersunk Head Screws - Product Grade A
23 开槽半沉头螺钉(短的)Table10 [BS]
BS 1981 - 1991
Slottted Oval Countersunk Head Screws: Short Length
24 开槽半沉头螺钉Table8 [BS]
BS 1981 - 1991
Slotted Raised Countersunk Head Machine Screws
25 英制开槽半沉头螺钉 - B.S.W. & B.S.F. 螺纹 [Table 3] [BS]
BS 450 - 1958
Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3]
26 米制开槽半沉头螺钉  [Table 2] [AS]
AS /NZS 1427 - 1996
ISO metric slotted raised countersunk head screws [Table 2]
27 精密机械用开槽半沉头螺钉 [CNS]
CNS 9679 - 1982
Slotted Raised Countersunk Head Screws For Fine Mechanics
28 开槽半沉头螺钉 [CNS]
CNS 4414 - 1981
Slotted Raised Countersunk Head Screws - Product Grade A
29 开槽半沉头螺钉(通用头型) - 产品等级A级 [DIN EN ISO]
DIN EN ISO 2010 - 1994
Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A
30 82° 开槽半沉头机械螺钉 [Table 7] (ASTM F837 / F468) [ASME]
ASME B 18.6.3 - 2013
82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)