About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
GB /T 1804 - 2000

GB /T 1804 - 2000

Display drawing:

国标GB /T1804 - 2000 GB1804 1804GB

Scan QR Code

Show on Mobile terminal.
Share with friends!
Send Inquiry

Similar Standards

1 Tolerances for fasteners— Part1:Bolts,screws,studs and nuts—Product grades A,B and C [ISO]
ISO 4759-1 - 2000 		Tolerances for fasteners— Part1:Bolts,screws,studs and nuts—Product grades A,B and C
2 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications [ISO]
ISO 2768-1 - 1989 		General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
3 Tolerances for fasteners - Part 3: Plain washers for bolts,screw and nuts - Product grades A, C and F [ISO]
ISO 4759-3 - 2016 		Tolerances for fasteners - Part 3: Plain washers for bolts,screw and nuts - Product grades A, C and F
4 Tolerances for fasteners - Part 2 : Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics [ISO]
ISO 4759-2 - 1979 		Tolerances for fasteners - Part 2 : Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics
5 Aerospace - Bolts and screws, metric - Tolerances of form and position [ISO]
ISO 7913 - 1994 		Aerospace - Bolts and screws, metric - Tolerances of form and position
6 Hot rolled steel plate 3 mm thick or above Tolerances on dimensions, shape and mass [DIN EN]
DIN EN 10029 - 1991 		Hot rolled steel plate 3 mm thick or above Tolerances on dimensions, shape and mass
7 Dimensions and tolerances of bright steel products [EN]
EN 10278 - 1999 		Dimensions and tolerances of bright steel products
8 Length Tolerances for Bolts [TABLE 13] [ASME]
ASME B 18.2.1 (T13) - 2012 		Length Tolerances for Bolts [TABLE 13]
9 Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications [ISO]
ISO 2768-2 - 1989 		Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications
10 Steel die forgings - Tolerance and machining allowance [GB]
GB /T 12362 - 2016 		Steel die forgings - Tolerance and machining allowance
11 Geometrical Product Specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits [GB]
GB /T 1800.1 - 2020 		Geometrical Product Specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
12 Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications [GB]
GB /T 1184 - 1996 		Geometrical tolerancing - Geometrical tolerance for features wlthout individual tolerance indications
13 Tolerances for fasteners - Bolts,screws,studs and nuts [GB]
GB /T 3103.1 - 2002 		Tolerances for fasteners - Bolts,screws,studs and nuts
14 Tolerences for fasteners-Bolt/nut assemblies for service temperatures from -200℃~+700℃ [GB]
GB /T 3103.4 - 2014 		Tolerences for fasteners-Bolt/nut assemblies for service temperatures from -200℃~+700℃
15 Torlerances for fasteners - Plain washers [GB]
GB /T 3103.3 - 2020 		Torlerances for fasteners - Plain washers
16 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications [JIS]
JIS B 0405 - 1991 		General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
17 Tolerances for fasteners Bolts 、screws and nuts for fine mechanics [GB]
GB 3103.2 - 1982 		Tolerances for fasteners Bolts 、screws and nuts for fine mechanics
18 Geometrical product specifications ( GPS ) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts [GB]
GB /T 1800.2 - 2020 		Geometrical product specifications ( GPS ) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
19 Technical Supply Conditions For Threaded Steel Fasteners - Part 2 Tolerances For Fasteners - Bolts, Screws, studs And Nuts - Product Grades A, B And C [IS]
IS 1367 (-2) - 2002 		Technical Supply Conditions For Threaded Steel Fasteners - Part 2 Tolerances For Fasteners - Bolts, Screws, studs And Nuts - Product Grades A, B And C