| 1 |
|
[ISO]
ISO 2320 - 2015
|
Mechanical Properties of Fasteners - Prevailing Torque Type Steel Nuts
|
| 2 |
|
[EN]
EN 2576 - 2020
|
Aerospace series - Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 900 MPa (at ambient temperature)/650℃ - Technical specification
|
| 3 |
|
[EN]
EN 20898-1 - 1991
|
Mechanical properties of fasteners - Part 1: Bolts, screws and studs
|
| 4 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T50) - 2013
|
Torsional Strength Requirements for Tapping Screws
|
| 5 |
|
[ISO]
ISO 898 (-2) - 2022
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes
|
| 6 |
|
[EN]
EN 20898-2 - 1993
|
Mechanical properties of fasteners - Part 2: Nuts with specified proof load values - Coarse thread
|
| 7 |
|
[ISO]
ISO 3506-3 - 2009
|
Mechanical properties of corrosion resistant stainless steel fasteners— Part 3:Set screws and similar fasteners not under tensile stress
|
| 8 |
|
[ASME/ANSI]
ASME/ANSI B 18.16.6 - 2008
|
Nylon Insert Locknuts (Inch Series)
|
| 9 |
|
[ISO]
ISO 898-5 - 2012
|
Mechanical properties—Set screw and similar threaded fasteners with specified hardness classes
|
| 10 |
|
[EN]
EN 20898-7 - 1995
|
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
| 11 |
|
[ASME]
ASME B 18.6.3 (T4.11.2-1) - 2024
|
Maximum Drive Torque for Type TRS Tapping Screws
|
| 12 |
|
[ASME/ANSI]
ASME/ANSI B 18.6.3 (T49) - 2013
|
Maximum Drive Torque for Type TRS Tapping Screws
|
| 13 |
|
[ISO]
ISO 2702 - 2011
|
Heat-treated steel tapping screws - Mechanical properties
|
| 14 |
|
[ISO]
ISO 898-1 - 2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1:Bolts,screws and studs with specified property classes. Coarse thread
|
| 15 |
|
[ISO]
ISO 898-2 - 2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specifed property classes - Coarse thread and fne pitch thread
|
| 16 |
|
[EN]
EN 28839 - 1991
|
Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts
|
| 17 |
|
[ISO]
ISO 2702 - 2022
|
Heat treated tapping screws - Mechanical and physical properties
|
| 18 |
|
[ISO]
ISO 3506-7 - 2024
|
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 7: Flat washers with specified grades and property classes
|
| 19 |
|
[ISO]
ISO 898-7 - 1992
|
Torsional test and minimum torques for bolts and screws
|
| 20 |
|
[ISO]
ISO 898 (-3) - 2018
|
Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes
|
| 21 |
|
[ISO]
ISO 10666 - 1999
|
Drilling screws with tapping screw thread— Mechanical and functional properties
|
| 22 |
|
[ISO]
ISO 3506-2 - 2020
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Nuts with specified grades and property classes bsi.
|
| 23 |
|
[ISO]
ISO 8839 - 1986
|
Mechanical properties of fasteners—Bolts,screws,studs and nuts made of non-ferrous metals
|
| 24 |
|
[EN]
EN 14399-2 - 2015
|
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
|
| 25 |
|
[ISO]
ISO 898-6 - 1994
|
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread
|
| 26 |
|
[ISO]
ISO 7085 - 1999
|
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
|
| 27 |
|
[ASME]
ASME B 18.6.3 (T4.11.3-1) - 2024
|
Torsional Strength Requirements for Tapping Screws
|
| 28 |
|
[ISO]
ISO 3506-4 - 2009
|
Mechanical properties of corrosion resistant stainless steel fasteners— Part 4:Tapping screws
|
| 29 |
|
[ISO]
ISO 3506-2 - 2009
|
Mechanical properties of corrosion resistant stainless steel fasteners—Part 1:Nuts
|
| 30 |
|
[EN]
EN 20898-6 - 1992
|
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread
|
| 31 |
|
[EN]
EN 15048-1 - 2016
|
Non-preloaded structural bolting assemblies - Part 1: General requirements
|
| 32 |
|
[GB]
GB /T 3098.10 - 1993
|
Mechanical properties of fasteners Bolts,scrows,studs and nuts made of non-ferrous metals
|
| 33 |
|
[GB]
GB /T 3098.6 - 2014
|
Mechanical properties of fasteners - Stainless steel Bolts, screws and studs
|
| 34 |
|
[GB]
GB /T 3098.9 - 2002
|
Mechanical properties of fasteners. Prevailing torque type steel hexagon nuts
|
| 35 |
|
[GB]
GB /T 116 - 1986
|
Specification for revit
|
| 36 |
|
[GB]
GB /T 3098.7 - 2000
|
Machanical properties of fasteners-Thread rolling screws
|
| 37 |
|
[GB]
GB /T 3098.2 - 2015
|
Mechanical properties of fasteners-nuts with coarse thread
|
| 38 |
|
[GB]
GB /T 3098.9 - 2020
|
Mechanical Properties of Fasteners - Prevailing Torque Type Steel Nuts
|
| 39 |
|
[GB]
GB /T 3098.6 - 2000
|
Mechanical properties of fasteners-Bolts、screws and studs made of stainless-steel
|
| 40 |
|
[GB]
GB /T 32076.2 - 2015
|
High-strength structural bolting assemblies for preloading - Part2: Suitability for preloading
|
| 41 |
|
[GB]
GB /T 3098.8 - 2010
|
Mechanical properties of fasteners Parts for bolted connections for use at temperatures from -200 ℃～+700 ℃
|
| 42 |
|
[GB]
GB /T 3098.25 - 2020
|
Mechanical properties of fasteners-Guidance for the selection of stainless steels and nickel alloys for fasteners
|
| 43 |
|
[GB]
GB /T 3098.3 - 2016
|
Mechanical properties of fasteners-Set screws
|
| 44 |
|
[GB]
GB /T 3098.5 - 2016
|
Mechanical Properties of Fasteners 一 Tapping Screws
|
| 45 |
|
[JIS]
JIS B 1055 - 2015
|
Heat-treated steel tapping screws - Mechanical properties
|
| 46 |
|
[GB]
GB /T 3098.22 - 2009
|
Mechanical properties of fasteners made of the fine grain non-heat treatment steel-Bolts,screws and studs
|
| 47 |
|
[GB]
GB /T 3098.11 - 2002
|
Mechanical properties of fasteners-Drilling screws with tapping screws thread
|
| 48 |
|
[GB]
GB /T 3098.6 - 2023
|
Mechanical properties of fasteners - Stainless steel Bolts, screws and studs
|
| 49 |
|
[GB]
GB /T 3098.16 - 2014
|
Mechanical properties of fasteners - Stainless steel set screws
|
| 50 |
|
[GB]
GB /T 94.1 - 2008
|
Spring washer technical conditions
|
| 51 |
|
[GB]
GB /T 3098.15 - 2014
|
Mechanical properties of fasteners - Stainless steel nuts
|
| 52 |
|
[GB]
GB /T 3098.4 - 2000
|
Mechanical properties of fasteners-Nuts-Fine pitch thread
|
| 53 |
|
[GB]
GB /T 3098.1 - 2010
|
Mechanical properties of fasteners-Bolts、screws and studs
|
| 54 |
|
[GB]
GB /T 3098.19 - 2004
|
Mechanical properties of fasteners-Blind rivets
|
| 55 |
|
[GB]
GB /T 3098.20 - 2004
|
Mechanical properties of fasteners. Wing nuts with specified proof torque
|
| 56 |
|
[GB]
GB /T 3098.5 - 2000
|
Mechanical propretles of fasteners tapping screws
|
| 57 |
|
[GB]
GB /T 3098.24 - 2020
|
Mechanical properties of fasteners-Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications
|
| 58 |
|
[ASTM]
ASTM A 194 - 2000
|
Carbon steels、alloy steels and stainless materials for bolts and nuts
|
| 59 |
|
[SAE]
SAE J 81 - 1997
|
Thread Rolling Screws
|
| 60 |
|
[AS]
AS 3566.1 - 2002
|
Self-drilling screws for the building and construction industries Part 1: General requirements and mechanical properties
|
| 61 |
|
[ASTM]
ASTM A 307 - 2010
|
Carbon Steel Bolts, Studs, and Threaded Rod 6000 PSI Tensile Strength
|
