Click Specification

Clevis Pins Without Head

NF E 25-753 - 1992 (R2002)

Display drawing:

Nominal Diameter
d

Φ3

Φ4

Φ5

Φ6

Φ8

Φ10

Φ12

Φ14

Φ16

Φ18

Φ20

Φ22

Φ24

d	max
d	min
d₁	min
d₁	max
L_e	min
c	max

3	4	5	6	8	10	12	14	16	18	20	22	24
2.94	3.925	4.925	5.925	7.91	9.91	11.89	13.89	15.89	17.89	19.87	21.87	23.87
0.8	1	1.2	1.6	2	3.2	3.2	4	4	5	5	5	6.3
0.94	1.14	1.34	1.74	2.14	3.38	3.38	4.18	4.18	5.18	5.18	5.18	6.52
1.6	2.2	2.9	3.2	3.5	4.5	5.5	6	6	7	8	8	9
1	1	2	2	2	2	3	3	3	3	4	4	4

Nominal Diameter
d

Φ27

Φ30

Φ33

Φ36

Φ40

Φ45

Φ50

Φ55

Φ60

Φ70

Φ80

Φ90

Φ100

d	max
d	min
d₁	min
d₁	max
L_e	min
c	max

27	30	33	36	40	45	50	55	60	70	80	90	100
26.87	29.87	32.84	35.84	39.84	44.84	49.84	54.81	59.81	69.81	79.81	89.78	99.78
6.3	8	8	8	8	10	10	10	10	13	13	13	13
6.52	8.22	8.22	8.22	8.22	10.22	10.22	10.22	10.22	13.27	13.27	13.27	13.27
9	10	10	10	10	12	12	14	14	16	16	16	16
4	4	4	4	4	4	4	6	6	6	6	6	6

①,Type A: no hole; type B: with hole

Send Inquiry

Similar Standards

1	[DIN EN] DIN EN 22341 - 1992	Clevis Pins with Head View Suppliers
2	[DIN] DIN 1444 - 1974	Clevis Pins with Head View Suppliers
3	[GB] GB /T 882 - 2008	Clevis Pin with Head - Type A and B View Suppliers
4	[GB] GB /T 882 - 1986	Clevis Pins with Head View Suppliers
5	[EN] EN 22340 (B) - 1992	Clevis Pins without Head - Form B
6	[ISO] ISO 2340 (A) - 1986	Clevis Pins Without Head - Type A
7	[DIN] DIN 1435 - 1977	Clevis Pins with Small Head; Finish mg
8	[ISO] ISO 2340 (B) - 1986	Clevis Pins Without Head - Type B
9	[DIN] DIN 11023 - 1979	Linch Pins
10	[ASME] ASME B 18.8.200M (B18.8.8M-Type A) - 2000	Metric Clevis Pin with Head - Type A
11	[DIN] DIN 5526 - 1999	Pins with Head for Rail Vehicles
12	[ASME/ANSI] ASME/ANSI B 18.8.1 - 2000	Clevis Pins with Head
13	[EN] EN 22341 - 1992	Clevis Pins with Head
14	[ASME] ASME B 18.8.8M (A) - 1994	Metric Clevis Pin with Head - Type A
15	[DIN EN] DIN EN 22340 (A) - 1992	Clevis Pins without Head - Form A
16	[ASME] ASME B 18.8.1 - 2014	Clevis Pins with Head
17	[ISO] ISO 8132 (AA4-R/AA6-R) - 2022	Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series: AA4-R - Pivot Pin, Plain Bearing or AA6-R - Pivot Pin, Spherical Bearing
18	[DIN EN] DIN EN 22340 (B) - 1992	Clevis Pins Without Head - Form B
19	[ISO] ISO 2341 - 1986	Clevis Pins with Head - Type A and B
20	[DIN] DIN 1434 - 1977	Clevis Pins with Small Head; Finish M
21	[EN] EN 22340 (A) - 1992	Clevis Pins without Head - Form A
22	[ASME] ASME B 18.8.200M (B18.8.8M-Type B) - 2000	Metric Clevis Pin with Head - Type B
23	[GB] GB /T 880 - 1986	Clevis Pins Without Head （Pins with split pin hole ）
24	[NF] NF E 25-754 - 1992 (R2002)	Clevis Pins with Head
25	[JIS] JIS B 2801 - 1996	Shackle Pin, Forms BA and SA, and of Round Plug
26	[GB] GB /T 880 (B) - 2008	Clevis Pins Without Head(Pins with Split Pin Hole)
27	[GB] GB /T 39949.1 (AA4-R/AA6-R) - 2021	Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series: AA4-R - Pivot Pin, Plain Bearing or AA6-R - Pivot Pin, Spherical Bearing
28	[SAE] SAE J 493 - 1961	Clevis Pin
29	[GOST] GOST 9650 (Type 3) - 1980	Axle with a Locking Washer Groove
30	[GOST] GOST 9650 (Type 4) - 1980	Axle with a Safety Ring Groove
31	[GOST] GOST 9650 (Type 5) - 1980	Clevis Pin with Head
32	[GOST] GOST 9650 (Type 7) - 1980	Axle with a Locking Washer
33	[GOST] GOST 9650 (Type 8) - 1980	Axle with a Safety Ring Groove
34	[IS] IS 6862 - 2005	Clevis Pins Without Head
35	[IS] IS 6863 - 2005	Clevis Pins with Head