ASME B 18.5 - 2012 (2017) 114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593)

Unit: inch

美标ASME B18.5 - 2012 (2017) ASME18.5 18.5 114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593)

Thread Size
d

10#

1/4

5/16

3/8

7/16

1/2

5/8

3/4

d
PP	UNC
d_s	max
	min
d_k	max
	min
k	max
	min
s	max
	min
k₁	max
	min

0.1900	0.2500	0.3125	0.3750	0.4375	0.5000	0.6250	0.7500
24	20	18	16	14	13	11	10
0.199	0.260	0.324	0.388	0.452	0.515	0.642	0.768
0.182	0.237	0.298	0.360	0.421	0.483	0.605	0.729
0.548	0.682	0.821	0.960	1.093	1.233	1.495	1.754
0.500	0.625	0.750	0.875	1.000	1.125	1.375	1.625
0.131	0.154	0.184	0.212	0.235	0.265	0.316	0.368
0.112	0.135	0.159	0.183	0.205	0.229	0.272	0.314
0.199	0.260	0.324	0.388	0.452	0.515	0.642	0.768
0.185	0.245	0.307	0.368	0.431	0.492	0.616	0.741
0.125	0.156	0.219	0.250	0.281	0.312	0.406	0.500
0.094	0.125	0.188	0.219	0.250	0.281	0.375	0.469

①,Minimum Thread Length:
The minimum length of thread shall be equal to twice the basic bolt diameter plus 0.25 in. for nominal bolt lengths of 6 in. or shorter, and twice the basic bolt diameter plus 0.50 in. for longer nominal lengths.
Bolts of nominal lengths too short to accommodate the minimum thread lengths shall be threaded full length. The length from the head or neck to the first complete (full form) thread shall not exceed the length of 2-1/2 threads for sizes up to and including 1 in., and 3-1/2 threads for sizes over 1 in.

Alternative history

ANSI/ASME B 18.5 - 2008 ANSI/ASME B 18.5 - 2012 ASME B 18.5 - 2012(2017)

Send Inquiry

Similar Standards

1	[GB] GB /T 10 - 2013	Countersunk Head Square Neck Bolts
2	[GB] GB /T 21934 - 2008	Earth-Moving Machinery - Plough Bolt
3	[GB] GB /T 10 - 1988	Flat Countersunk Square Neck Bolts
4	[GB] GB 10 - 1976	Countersunk head square neck bolts
5	[DIN] DIN 605 - 2010	Flat Countersunk Head Square Neck Bolts With Long Square
6	[DIN] DIN 608 - 2010	Flat Countersunk Head Square Neck Bolts With Short Square Suppliers(1)
7	[DIN] DIN 608 - 2007	Flat Countersunk Short Square Neck Bolts，With Short Square Suppliers(1)
8	[DIN] DIN 605 - 1981	Flat countersunk head square neck bolts with long square
9	[DIN] DIN 608 - 1981	Flat Countersunk Square Neck Bolts With Short Square Suppliers(1)
10	[ANSI/ASME] ANSI/ASME B 18.5 - 2008	Flat countersunk head elevator bolts
11	[ANSI/ASME] ANSI/ASME B 18.5 - 2012	114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593)
12	[ANSI/ASME] ANSI/ASME B 18.5 - 2012	Large Countersunk Square Neck Bolts [Table9]
13	[ANSI/ASME] ANSI/ASME B 18.5 - 2008	114° Countersunk square neck bolts
14	[ANSI/ASME] ANSI/ASME B 18.5 - 2008	Large Countersunk Square Neck Bolts [Table9]
15	[ANSI/ASME] ANSI/ASME B 18.9 - 2007	Plow Bolts(Round,Countersunk,Square Neck)
16	[UNI] UNI 6104 - 1975	Flat Countersunk Square Neck Bolts - Grade C
17	[BS] BS 4933 - 1973	Metric 120°Countersunk Head Square Neck Bolts
18	[BS] BS 4933 - 1973	Metric 90°Countersunk Square Bolts
19	[BS] BS 325 - 1947	Black Countersunk Square Neck Bolts For Iron
20	[BS] BS 325 - 1947	Black Counersunk Square Neck Bolts For Woodwork
21	[CNS] CNS 4418 - 1981	Countersunk Head Square Neck Bolt
22	[CNS] CNS 4419 - 1981	120°Flat Countersunk Head Short Square Neck Bolts
23	[ASME] ASME B 18.5 - 2012 (2017)	Flat Countersunk Head Elevator Bolts [Table9]
24	[ASME] ASME B 18.9 - 2012	No.3 Regular Head Plow Bolts (Round, Countersunk, Square Neck) (A307, F468, F593, SAE J 429)
25	[ASME] ASME B 18.9 - 2012	No.3 Repair Head Plow Bolts (Round, Countersunk, Square Neck) (A307, F468, F593, SAE J 429)