| 1 |
|
[ASTM]
ASTM A 193/193M - 1993
|
High temperature alloy steel and stainless steel screws materials
|
| 2 |
|
[GB]
GB /T 222 - 2006
|
Permissible tolerances for chemical composition of steel products
|
| 3 |
|
[GB]
GB /T 1172 - 1999
|
Conversion of hardness and strength for ferrous metal
|
| 4 |
|
[GB]
GB /T 716 - 1991
|
Cold-rolled carbon structural steel strips
|
| 5 |
|
[GB]
GB 3206 - 1982
|
Carbon Constructional Quality Steel Wires
|
| 6 |
|
[ISO]
ISO 1127 - 1992
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| 7 |
|
[ISO]
ISO 3304 - 1985
|
Plain end seamless precision steel tubes - Technical conditions for delivery
|
| 8 |
|
[ISO]
ISO 3305 - 1985
|
Plain end welded precision steel tubes - Technical conditions for delivery
|
| 9 |
|
[DIN EN]
DIN EN 10220 - 2003
|
Seamless and welded steel tubes - Dimensions and masses per unit length
|
| 10 |
|
[EN]
EN 3018 - 2019
|
Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm
|
| 11 |
|
[EN]
EN 10365 - 2017
|
Hot rolled steel channels, I and H sections - Dimensions and masses
|
| 12 |
|
[EN]
EN 2947 - 2006
|
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <= 2,3 mm
|
| 13 |
|
[EN]
EN 10059 - 2003
|
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
|
| 14 |
|
[EN]
EN 10060 - 2003
|
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
|
| 15 |
|
[IS]
IS 1161 - 1998
|
Steel tubes for structural purposes - Specification
|
| 16 |
|
[IS]
IS 1730 - 1989 (R2004)
|
Steel plates, sheets, strips and flats for structural and general engineering purposes - Dimensions
|
| 17 |
|
[IS]
IS 1732 - 1989
|
Steel bars, Round and square for structural and general engineering purposes dimensions
|
| 18 |
|
[ASTM]
ASTM A193/A193M - 2001
|
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Servise
|
| 19 |
|
[GB]
GB /T 4232 - 2019
|
Stainless steel wire for cold heading and cold forging
|
| 20 |
|
[GB]
GB /T 4240 - 2019
|
Stainless steel wires
|
| 21 |
|
[GB]
GB /T 15007 - 2017
|
Designations of corrosion-resistant alloy
|
| 22 |
|
[GB]
GB /T 4356 - 2016
|
Stainless steel wire rod
|
| 23 |
|
[GB]
GB /T 3280 - 2015
|
Cold rolled stainless steel plate and strip
|
| 24 |
|
[GB]
GB /T 4238 - 2015
|
Heat-resisting steel plate , sheet and strip
|
| 25 |
|
[GB]
GB /T 6478 - 2015
|
Steels For Cold Heading And Cold Extruding
|
| 26 |
|
[GB]
GB /T 699 - 2015
|
Quality carbon structure steels
|
| 27 |
|
[GB]
GB /T 31303 - 2014
|
Austenitic-Ferritic duplex stainless steel bars
|
| 28 |
|
[GB]
GB /T 24588 - 2009
|
Stainless steel wires for spring
|
| 29 |
|
[GB]
GB /T 4240 - 2009
|
Stainless steel wires
|
| 30 |
|
[GB]
GB /T 1591 - 2008
|
High Strength Low Alloy Structural Steels
|
| 31 |
|
[GB]
GB /T 21833 - 2008
|
Austenitic-Ferritic (duplex) grade stainless steel seamless tubes and pipes
|
| 32 |
|
[GB]
GB /T 8731 - 2008
|
Free-Cutting Structural Steel
|
| 33 |
|
[GB]
GB /T 1220 - 2007
|
Stainless Steel Bars
|
| 34 |
|
[GB]
GB /T 1221 - 2007
|
Heat-resistant Steel Bars
|
| 35 |
|
[GB]
GB /T 1222 - 2007
|
Spring Steels
|
| 36 |
|
[GB]
GB /T 20878 - 2007
|
Stainless and heat-resisting steels - Designation and chemical composition
|
| 37 |
|
[GB]
GB /T 20410 - 2006
|
Steels for turbine bolts at high temperature
|
| 38 |
|
[GB]
GB /T 700 - 2006
|
Carbon Structural Steels
|
| 39 |
|
[GB]
GB /T 14992 - 2005
|
Classification and designation for superalloys and high temperature intermetallic materials
|
| 40 |
|
[GB]
GB /T 5216 - 2004
|
Structural Steels Subject to End-quench Hardenability Requirments
|
| 41 |
|
[GB]
GB /T 18254 - 2002
|
High-carbon Chromium Bearing Steel
|
| 42 |
|
[GB]
GB T 6478 - 2001
|
Steels for cold heading and cold extruding
|
| 43 |
|
[GB]
GB /T 3077 - 1999
|
Alloy Structure Steels
|
| 44 |
|
[GB]
GB /T 699 - 1999
|
Quality Carbon Structural Steels
|
| 45 |
|
[GB]
GB /T 17107 - 1997
|
Structural Steel Grades And Mechanical Property For Forgings
|
| 46 |
|
[GB]
GB /T 1220 - 1992
|
Stainless steel bars
|
| 47 |
|
[GB]
GB /T 4239 - 1991
|
Cold rolled stainless steel and heatresisting steel strip
|
| 48 |
|
[ISO]
ISO 4955 - 2005
|
Heat-resistant Steels
|
| 49 |
|
[ISO]
ISO 683-14 - 2004
|
Heat-treatable steels,alloy steels and free-cutting steels. Part 14:Hot-rolled steels for quenched and tempered springs third edition
|
| 50 |
|
[ISO]
ISO TS 15510 - 2003
|
TECHNICAL SPECIFICATION Stainless steels-Chemical composition
|
| 51 |
|
[ISO]
ISO 8458-2 - 2002
|
Steel wire for mechanical springs — Part 2: Patented cold-drawn non-alloy steel wire
|
| 52 |
|
[ISO]
ISO 8458-3 - 2002
|
Steel wire for mechanical springs. Part 3:Oil-hardened and tempered wire second edition
|
| 53 |
|
[ISO]
ISO 4951-2 - 2001
|
High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
|
| 54 |
|
[ISO]
ISO 9327 (-5) - 1999
|
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels
|
| 55 |
|
[ISO]
ISO 9327 (-3) - 1999
|
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties
|
| 56 |
|
[ISO]
ISO 683-18 - 1996
|
Heat-treatable steels, alloy steels and free-cutting steels
|
| 57 |
|
[ISO]
ISO 4950-2 - 1995
|
High yield strength flat steel products
|
| 58 |
|
[ISO]
ISO 630 - 1995 (R2003)
|
Structural steels--Plates,wide flats,bars,sections and profiles
|
| 59 |
|
[ISO]
ISO 4955 - 1994
|
Heat-resistant Steels and Alloy
|
| 60 |
|
[ISO]
ISO 4954 - 1993
|
Steels for cold heading and cold extruding second edition
|
| 61 |
|
[ISO]
ISO 683-9 - 1988
|
Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels
|
| 62 |
|
[ISO]
ISO 683-1 - 1987
|
Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts
|
| 63 |
|
[ISO]
ISO 683-11 - 1987
|
heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steels
|
| 64 |
|
[ISO]
ISO 683-13 - 1986
|
Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels
|
| 65 |
|
[ISO]
ISO 683-16 - 1976
|
Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels
|
| 66 |
|
[DIN]
DIN 1654-2 - 1989
|
Cold heading and extruding steels Technical delivery conditions for killed unalloyed steels not intended for heat treatment
|
| 67 |
|
[DIN]
DIN 1651 - 1988
|
Free-cutting steels technical delivery conditions
|
| 68 |
|
[DIN]
DIN 17210 - 1986
|
Case hardening steel coil
|
| 69 |
|
[DIN]
DIN 17224 - 1982
|
Stainless steel wire and strip for springs Technical delivery and conditions
|
| 70 |
|
[DIN]
DIN 17100 - 1980
|
Steels for General Structural Purposes Quality Standard
|
| 71 |
|
[DIN]
DIN 17230 - 1980
|
Ball and Roller Bearing Steels Technical Conditions of Delivery
|
| 72 |
|
[DIN]
DIN 17440 - 1972
|
Stainless steel quality standards
|
| 73 |
|
[DIN EN]
DIN EN 10095 - 2018
|
Heat resisting steels and nickel alloys
|
| 74 |
|
[DIN EN]
DIN EN 10263-4 - 2002
|
Steel rod, bars and wire for cold heading and cold extrusion Part 4: Technical delivery conditions for steels for quenching and tempering
|
| 75 |
|
[DIN EN]
DIN EN 10025 - 1994
|
Hot rolled products of non-alloyed structural steels Technical delivery conditions
|
| 76 |
|
[ASTM]
ASTM B 637 - 2018
|
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
|
| 77 |
|
[ASTM]
ASTM A240/240M - 2018
|
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels and General Applications
|
| 78 |
|
[ASTM]
ASTM B 581 - 2017
|
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
|
| 79 |
|
[ASTM]
ASTM A276/A276M - 2017
|
Standard Specification for Stainless Steel Bars and Shapes
|
| 80 |
|
[ASTM]
ASTM A615/A615M - 2016
|
Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
|
| 81 |
|
[ASTM]
ASTM A706/A706M - 2016
|
Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
|
| 82 |
|
[ASTM]
ASTM A295/A295M - 2014
|
Standard Specification for High-Carbon Anti-Friction Bearing Steel
|
| 83 |
|
[ASTM]
ASTM A510/A510M - 2013
|
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
|
| 84 |
|
[ASTM]
ASTM A573/A573M - 2013
|
Standard Specification for Structural Carbon Steel Plates of Improved Toughness
|
| 85 |
|
[ASTM]
ASTM A29/A29M - 2012
|
Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
|
| 86 |
|
[ASTM]
ASTM A1040 - 2010
|
Standard Specification for Specifying Harmonized Standard Grade Compositions for Wrought Carbon , Low-Alloy, and Alloy Steels
|
| 87 |
|
[ASTM]
ASTM A493 - 2009 (2013)
|
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
| 88 |
|
[ASTM]
ASTM B 574 - 2006
|
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum,Low-Carbon Nickel-Molybdenum-Chromium,Low-Carbon Nickel-Molybdenum-Chromium-Tantalum,Low-Carbon Nickel-Chromium-Molybdenum-Copper,and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
|
| 89 |
|
[ASTM]
ASTM A29/A29M - 2005
|
Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
|
| 90 |
|
[ASTM]
ASTM A 304 - 2004
|
Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements ***BEST AVAILABLE COPY***
|
| 91 |
|
[ASTM]
ASTM A959 - 2004
|
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
|
| 92 |
|
[ASTM]
ASTM B512 - 2004 (2014)
|
Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars
|
| 93 |
|
[ASTM]
ASTM A283/A283M - 2003
|
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
|
| 94 |
|
[ASTM]
ASTM A 453/453M - 2002
|
Standard Specification for High-Temperature Bolting Materials,with Expansion Coefficients Comparable to Austenitic Stainless Steels
|
| 95 |
|
[ASTM]
ASTM A 633 - 2001
|
Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
|
| 96 |
|
[SAE]
SAE AMS 5516R - 2019
|
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Solution Heat Treated
|
| 97 |
|
[SAE]
SAE AMS 5639J - 2017
|
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated
|
| 98 |
|
[SAE]
SAE AMS 5659S - 2016
|
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 1 5Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
|
| 99 |
|
[SAE]
SAE AMS 5913B - 2014
|
Steel,Corrosion-Resistant,Sheet and Strip 19Cr-9.2Ni Cold Rolled ,Full Hard, 185ksi(1276Mpa) Tensile Strength
|
| 100 |
|
[SAE]
SAE AMS 5636F - 2012
|
Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni(SAE 30302) Solution Heat Treated and Cold Drawn 100ksi(689Mpa) Tensile Strength
|
