| 1 |
|
[EN]
EN 10277-3 - 1999
|
Bright steel Products - Technical Delivery Conditions - Part 3: Free-Cutting Steels
|
| 2 |
|
[SAE]
SAE AMS 5643Q - 2003
|
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable
|
| 3 |
|
[SAE]
SAE J 403 - 2001
|
Chemical Compositions of Carbon Steels
|
| 4 |
|
[SAE]
SAE J1249 - 2000
|
Former SAE Standard and Former SAE Ex-Steels
|
| 5 |
|
[SAE]
SAE J404 - 2000
|
Chemical Compositions of SAE Alloy Steels
|
| 6 |
|
[SAE]
SAE J405 - 1998
|
（R）Chemical Composition of SAE Wrought Stainless Steels
|
| 7 |
|
[SAE]
SAE J 470c - 1976
|
Wrought Nickel and Nickel - Related Alloys
|
| 8 |
|
[SAE]
SAE AMS 5678F - 1975 (R2002)
|
Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable
|
| 9 |
|
[SAE]
SAE J467b - 1956 (R1968)
|
Special Purpose Alloys (Superalloys)
|
| 10 |
|
[EN]
EN 10269 - 2013
|
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
|
| 11 |
|
[EN]
EN 10305-1 - 2010
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
|
| 12 |
|
[EN]
EN 10028-2 - 2009
|
Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
|
| 13 |
|
[EN]
EN 10028-3 - 2009
|
Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized
|
| 14 |
|
[EN]
EN 10208-2 - 2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions
|
| 15 |
|
[EN]
EN 10349 - 2009
|
Steel castings - Austenitic manganese steel castings
|
| 16 |
|
[EN]
EN 10120 - 2008
|
Steel sheet and strip for welded gas cylinders
|
| 17 |
|
[EN]
EN 10277-2 - 2008
|
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
|
| 18 |
|
[EN]
EN 10302 - 2008
|
Creep resisting steels,nickel and cobalt alloys
|
| 19 |
|
[EN]
EN 10216-2 - 2007
|
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties
|
| 20 |
|
[EN]
EN 10255 - 2007
|
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
|
| 21 |
|
[EN]
EN 10083-2 - 2006
|
Steels for quenching and tempering. Part 2:Technical delivery conditions for non alloy steels
|
| 22 |
|
[EN]
EN 10083-3 - 2006
|
Steels for Quenching and Tempering - Part 3: Technical Delivery Conditions for Alloy Steels
|
| 23 |
|
[EN]
EN 10210-1 - 2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
|
| 24 |
|
[EN]
EN 10268 - 2006 (+A1-2013)
|
cold rolled steel flat products with high yield strength for cold forming - technical delivery conditions
|
| 25 |
|
[EN]
EN 10269 - 2006
|
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
|
| 26 |
|
[EN]
EN 10088-1 - 2005
|
Stainless steels. Part 1:List of stainless steels
|
| 27 |
|
[EN]
EN 10088-2 - 2005
|
Stainless steels – Part 2: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resisting Steels for General Purposes
|
| 28 |
|
[EN]
EN 10088-3 - 2005
|
Stainless steels--Part 3:Techincal Delivery Conditions for Semi-Finished Products,Bar,Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
|
| 29 |
|
[EN]
EN 10207 - 2005
|
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
|
| 30 |
|
[EN]
EN 10293 - 2005
|
Steel castings for general engineering uses
|
| 31 |
|
[EN]
EN 10296-2 - 2005
|
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
|
| 32 |
|
[EN]
EN 10297 (2) - 2005
|
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
|
| 33 |
|
[EN]
EN 10025-2 - 2004
|
Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
|
| 34 |
|
[EN]
EN 10025-3 - 2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
|
| 35 |
|
[EN]
EN 10025-4 - 2004
|
Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
|
| 36 |
|
[EN]
EN 10216-1 - 2004
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties
|
| 37 |
|
[EN]
EN 10253-4 - 2003
|
Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
|
| 38 |
|
[EN]
EN 10296-1 - 2003
|
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 1: Non-alloy and alloy steel tubes
|
| 39 |
|
[EN]
EN 10297-1 - 2003
|
Seamless Steel Tubes for Mechanical and General Engineering Purposes - Technical Delivery Conditions - Part 1: Non-Alloy and Alloy Steel Tubes
|
| 40 |
|
[EN]
EN 10305-5 - 2003
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
|
| 41 |
|
[EN]
EN 10089 - 2002
|
Hot rolled steels for quenched and tempered springs; technical delivery conditions
|
| 42 |
|
[EN]
EN 10132-4 - 2002
|
Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 4: Spring Steels and Other Applications
|
| 43 |
|
[EN]
EN 10224 - 2002
|
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
|
| 44 |
|
[EN]
EN 10295 - 2002
|
Heat resistant steel castings
|
| 45 |
|
[EN]
EN 10305-2 - 2002
|
Steel tubes for Precision Applications - Technical Delivery Conditions - Welded Cold Drawn Tubes
|
| 46 |
|
[EN]
EN 13835 - 2002
|
Founding - Austenitic cast irons
|
| 47 |
|
[EN]
EN 10085 - 2001
|
Nitriding Steels. Technical Delivery Conditions
|
| 48 |
|
[EN]
EN 10263-2 - 2001
|
Steel Rod,bars and Wire for Cold Heading and Cold Extrusion - Part 2: Technical Delivery Conditions for Steels Not Intended for Heat Treatment after Cold Working
|
| 49 |
|
[EN]
EN 10263-3 - 2001
|
Steel Rod,bars and Wire for Cold Heading and Cold Extrusion - Part 3: Technical Delivery Conditions for Case Hardening Steels
|
| 50 |
|
[EN]
EN 10263-4 - 2001
|
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering
|
| 51 |
|
[EN]
EN 10263-5 - 2001
|
teel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
| 52 |
|
[EN]
EN 10222-2 - 2000
|
Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
|
| 53 |
|
[EN]
EN 10250-2 - 2000
|
Open Die Steel Forgings for General Engineering Purposes - Part 2: Non-Alloy Quality and Special Steels
|
| 54 |
|
[EN]
EN 10273 - 2000
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
| 55 |
|
[EN]
EN 10087 - 1999
|
Free-Cutting Steels Technical Delivery Conditions for Semi-Finished Products,Hot-Rolled Bars and Rods
|
| 56 |
|
[EN]
EN 10095 - 1999
|
Heat resisting steels and nickel alloys
|
| 57 |
|
[EN]
EN 10250-3 - 1999
|
Open Die Steel Forgings for General Engineering Purposes - Part 3: Alloy Special Steels
|
| 58 |
|
[EN]
EN 10250-4 - 1999
|
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
|
| 59 |
|
[JIS]
JIS G 3508-1 - 2005
|
Boron Steels for Cold Heading Part 1:Wire Rods
|
| 60 |
|
[KS]
KS D 3752 - 2007
|
Carbon constructional steel
|
| 61 |
|
[KS]
KS D 3503 - 2008
|
Rolled steels for general structure
|
| 62 |
|
[KS]
KS D 3504 - 2011
|
Steel bars for concrete reincement
|
| 63 |
|
[KS]
KS D 3752 - 2019
|
Quality carbon structure steels
|
| 64 |
|
[CNS]
CNS 3229(G3063)
|
Nickel Chromium Steels for Machnical Structural Use
|
| 65 |
|
[AS]
AS NZS 4671 - 2001
|
Steel reinforcing materials
|
| 66 |
|
[NF]
NF A 35-573 - 1990
|
Stainless steels for general purposes - Plates, wide strips and strips
|
| 67 |
|
[NF]
NF A 35-573 - 1996
|
Flat products of stainless steel, heat-resistant steel and alloy steel
|
| 68 |
|
[JIS]
JIS G 5111 - 1991
|
High tensile strength carbon steel castings and low alloy steel castings structural purposes
|
| 69 |
|
[JIS]
JIS G 4312 - 1991
|
Heat-resisting steel plate,sheet and strip
|
| 70 |
|
[JIS]
JIS G 4311 - 1991
|
Heat-resisting steel bars and wire rods
|
| 71 |
|
[JIS]
JIS G 3474 - 1995
|
High tensile strength steel tubes for tower structural purposes
|
| 72 |
|
[JIS]
JIS G 4309 - 1999
|
Stainless steel wires
|
| 73 |
|
[JIS]
JIS G 7401 - 2000
|
Steels for Cold Heading and Cold Extruding
|
| 74 |
|
[JIS]
JIS G 4315 - 2000
|
Stainless steel wires for cold heading and cold forging
|
| 75 |
|
[JIS]
JIS G 4053 - 2003
|
Alloy steel plate for machinery
|
| 76 |
|
[JIS]
JIS G 4052 - 2003
|
Structural steels with specified hardenability bands
|
| 77 |
|
[JIS]
JIS G 3509-1 - 2003
|
Low-Alloyed Steels for Cold Heading Part 1:Wire Rods
|
| 78 |
|
[JIS]
JIS G 3459 - 2004
|
Stainless steel pipes
|
| 79 |
|
[JIS]
JIS G 3124 - 2004
|
Cold finished carbon and alloy steel bars
|
| 80 |
|
[JIS]
JIS G 4802 - 2005
|
Cold-Rolled Steel Strips for Springs
|
| 81 |
|
[JIS]
JIS G 4801 - 2005
|
Spring Steels
|
| 82 |
|
[JIS]
JIS G 4403 - 2005
|
High speed tool steels
|
| 83 |
|
[JIS]
JIS G 4305 - 2005
|
Cold-rolled stainless steel plate,sheet and strip
|
| 84 |
|
[JIS]
JIS G 4304 - 2005
|
Hot-Rolled Stainless Steel Plate,Sheet and Strip
|
| 85 |
|
[JIS]
JIS G 4303 - 2005
|
Stainless Steel Bars
|
| 86 |
|
[JIS]
JIS G 4202 - 2005
|
Aluminium chromium molybdenum steels
|
| 87 |
|
[JIS]
JIS G 4051 - 2005
|
Carbon steels for machine structural use
|
| 88 |
|
[BS]
BS 4449 - 2005
|
Steel for the reinforcement of concrete - Weldable renforcing steel - Bar , coil and decoiled product - Specification
|
| 89 |
|
[GOST]
GOST 380 - 2005
|
Common Quality Carbon Steel Grades
|
| 90 |
|
[BS]
BS 970-4 - 1970
|
Specification for Wrought steels in the form of blooms,billets,bars and forgings--Part 4:Valve steels
|
| 91 |
|
[BS]
BS 5770-4 - 1981
|
Steel strip intended for the manufacture of springs —Part 4: Specification for martensitic and austenitic stainless steel
|
| 92 |
|
[BS]
BS 970-1 - 1983
|
British Standard Specification for Wrough steels for mechanical and allied engineering purposes Part 1. General inspection and testing procedures and specific requirements for carbon,carbon manganese,alloy and stainless steels
|
| 93 |
|
[BS]
BS 1449-2 - 1983
|
Steel plate, sheet and strip —Part 2: Specification for stainless and heat-resisting steel plate, sheet and strip
|
| 94 |
|
[BS]
BS 3111 (1) - 1987
|
Steel for cold forged fasteners and similar components — Part 1: Specification for carbon and low alloy steel wire
|
| 95 |
|
[BS]
BS 970-3 - 1991
|
Specification for wrought steel for machanical and allied engineering purposes part 3:bright bars for general engineering purposes
|
| 96 |
|
[EN]
EN 10083-1 - 1996
|
Steels for quenching and tempering - Part 1: General technical delivery conditions
|
| 97 |
|
[EN]
EN 10084 - 1998
|
Case hardening steels. Technical delivery conditions
|
| 98 |
|
[EN]
EN 10090 - 1998
|
Valve steels and alloys for internal combustion engines
|
| 99 |
|
[EN]
EN 10283 - 1998
|
Corrosion resistant steel castings
|
| 100 |
|
[GOST]
GOST 1050 - 1988
|
Sized Bars Made Of High-Quality Structural Carbon Steel with A Special Surface Finish
|
