| 1 |
|
[ISO]
ISO 630 - 1995 (R2003)
|
Structural steels--Plates,wide flats,bars,sections and profiles
|
| 2 |
|
[EN]
EN 2947 - 2006
|
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <= 2,3 mm
|
| 3 |
|
[DIN EN]
DIN EN 10220 - 2003
|
Seamless and welded steel tubes - Dimensions and masses per unit length
|
| 4 |
|
[EN]
EN 10365 - 2017
|
Hot rolled steel channels, I and H sections - Dimensions and masses
|
| 5 |
|
[ISO]
ISO 3304 - 1985
|
Plain end seamless precision steel tubes - Technical conditions for delivery
|
| 6 |
|
[EN]
EN 10269 - 2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
|
| 7 |
|
[EN]
EN 10263-3 - 2001
|
Steel rod,bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
|
| 8 |
|
[EN]
EN 10083-2 - 2006
|
Steels for quenching and tempering. Part 2:Technical delivery conditions for non alloy steels
|
| 9 |
|
[ISO]
ISO 9327 (-5) - 1999
|
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels
|
| 10 |
|
[DIN]
DIN 1651 - 1988
|
Free-cutting steels technical delivery conditions
|
| 11 |
|
[EN]
EN 10263-5 - 2001
|
teel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
| 12 |
|
[EN]
EN 10263-2 - 2001
|
Steel rod,bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
|
| 13 |
|
[EN]
EN 10305-5 - 2003
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
|
| 14 |
|
[DIN]
DIN 17224 - 1982
|
Stainless steel wire and strip for springs Technical delivery and conditions
|
| 15 |
|
[EN]
EN 10224 - 2002
|
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
|
| 16 |
|
[ISO]
ISO 4955 - 1994
|
Heat-resistant Steels and Alloy
|
| 17 |
|
[EN]
EN 10297-1 - 2003
|
Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
|
| 18 |
|
[EN]
EN 10085 - 2001
|
Nitriding Steels. Technical Delivery Conditions
|
| 19 |
|
[EN]
EN 10305-2 - 2002
|
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes
|
| 20 |
|
[EN]
EN 3018 - 2019
|
Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm
|
| 21 |
|
[EN]
EN 10060 - 2003
|
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
|
| 22 |
|
[ISO]
ISO 9327 (-3) - 1999
|
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties
|
| 23 |
|
[EN]
EN 10269 - 2006
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
|
| 24 |
|
[ISO]
ISO 683-16 - 1976
|
Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels
|
| 25 |
|
[DIN]
DIN 17230 - 1980
|
Ball and Roller Bearing Steels Technical Conditions of Delivery
|
| 26 |
|
[EN]
EN 10210-1 - 2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
|
| 27 |
|
[EN]
EN 10059 - 2003
|
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
|
| 28 |
|
[ISO]
ISO 8458-3 - 2002
|
Steel wire for mechanical springs. Part 3:Oil-hardened and tempered wire second edition
|
| 29 |
|
[EN]
EN 10028-2 - 2009
|
Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
|
| 30 |
|
[EN]
EN 10273 - 2000
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
| 31 |
|
[DIN]
DIN 1654-2 - 1989
|
Cold heading and extruding steels Technical delivery conditions for killed unalloyed steels not intended for heat treatment
|
| 32 |
|
[ISO]
ISO 683-14 - 2004
|
Heat-treatable steels,alloy steels and free-cutting steels. Part 14:Hot-rolled steels for quenched and tempered springs third edition
|
| 33 |
|
[DIN EN]
DIN EN 10263-4 - 2002
|
Steel rod, bars and wire for cold heading and cold extrusion Part 4: Technical delivery conditions for steels for quenching and tempering
|
| 34 |
|
[DIN]
DIN 17100 - 1980
|
Steels for General Structural Purposes Quality Standard
|
| 35 |
|
[EN]
EN 10277-2 - 2008
|
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
|
| 36 |
|
[EN]
EN 10083-1 - 1996
|
Steels for quenching and tempering - Part 1: General technical delivery conditions
|
| 37 |
|
[EN]
EN 10090 - 1998
|
Valve steels and alloys for internal combustion engines
|
| 38 |
|
[ISO]
ISO TS 15510 - 2003
|
TECHNICAL SPECIFICATION Stainless steels-Chemical composition
|
| 39 |
|
[DIN EN]
DIN EN 10095 - 2018
|
Heat resisting steels and nickel alloys
|
| 40 |
|
[EN]
EN 10089 - 2002
|
Hot rolled steels for quenched and tempered springs; technical delivery conditions
|
| 41 |
|
[EN]
EN 10208-2 - 2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions
|
| 42 |
|
[ISO]
ISO 4951-2 - 2001
|
High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
|
| 43 |
|
[ISO]
ISO 683-13 - 1986
|
Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels
|
| 44 |
|
[EN]
EN 10028-3 - 2009
|
Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized
|
| 45 |
|
[EN]
EN 10025-2 - 2004
|
Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
|
| 46 |
|
[ISO]
ISO 8458-2 - 2002
|
Steel wire for mechanical springs — Part 2: Patented cold-drawn non-alloy steel wire
|
| 47 |
|
[DIN]
DIN 17210 - 1986
|
Case hardening steel coil
|
| 48 |
|
[ISO]
ISO 1127 - 1992
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| 49 |
|
[ISO]
ISO 683-9 - 1988
|
Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels
|
| 50 |
|
[DIN]
DIN 17440 - 1972
|
Stainless steel quality standards
|
| 51 |
|
[ISO]
ISO 683-11 - 1987
|
heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steels
|
| 52 |
|
[EN]
EN 10084 - 1998
|
Case hardening steels. Technical delivery conditions
|
| 53 |
|
[EN]
EN 10295 - 2002
|
Heat resistant steel castings
|
| 54 |
|
[EN]
EN 10222-2 - 2000
|
Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
|
| 55 |
|
[EN]
EN 10025-3 - 2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
|
| 56 |
|
[EN]
EN 10268 - 2006 (+A1-2013)
|
cold rolled steel flat products with high yield strength for cold forming - technical delivery conditions
|
| 57 |
|
[EN]
EN 10095 - 1999
|
Heat resisting steels and nickel alloys
|
| 58 |
|
[EN]
EN 10253-4 - 2003
|
Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
|
| 59 |
|
[EN]
EN 10255 - 2007
|
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
|
| 60 |
|
[EN]
EN 10297 (2) - 2005
|
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
|
| 61 |
|
[ISO]
ISO 4955 - 2005
|
Heat-resistant Steels
|
| 62 |
|
[EN]
EN 10088-3 - 2005
|
Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
|
| 63 |
|
[DIN EN]
DIN EN 10025 - 1994
|
Hot rolled products of non-alloyed structural steels Technical delivery conditions
|
| 64 |
|
[EN]
EN 10296-2 - 2005
|
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
|
| 65 |
|
[ISO]
ISO 3305 - 1985
|
Plain end welded precision steel tubes - Technical conditions for delivery
|
| 66 |
|
[EN]
EN 10087 - 1999
|
Free-cutting steels Technical delivery conditions for semi-finished products,hot-rolled bars and rods
|
| 67 |
|
[ISO]
ISO 4954 - 1993
|
Steels for cold heading and cold extruding second edition
|
| 68 |
|
[ISO]
ISO 683-18 - 1996
|
Heat-treatable steels, alloy steels and free-cutting steels
|
| 69 |
|
[ISO]
ISO 4950-2 - 1995
|
High yield strength flat steel products
|
| 70 |
|
[EN]
EN 10250-2 - 2000
|
pen die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
|
| 71 |
|
[ISO]
ISO 683-1 - 1987
|
Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts
|
| 72 |
|
[EN]
EN 10088-1 - 2005
|
Staehle Stainless steels. Part 1:List of stainless steels
|
| 73 |
|
[JIS]
JIS G 4804 - 2008
|
Free-cutting steels
|
| 74 |
|
[JIS]
JIS G 4304 - 2005
|
Hot-rolled stainless steel plate,sheet and strip
|
| 75 |
|
[GB]
GB /T 14992 - 2005
|
Classification and designation for superalloys and high temperature intermetallic materials
|
| 76 |
|
[GB]
GB /T 1221 - 2007
|
Heat-resistant Steel Bars
|
| 77 |
|
[GB]
GB /T 24588 - 2009
|
Stainless steel wires for spring
|
| 78 |
|
[JIS]
JIS G 4312 - 1991
|
Heat-resisting steel plate,sheet and strip
|
| 79 |
|
[BS]
BS 4449 - 2005
|
Steel for the reinforcement of concrete - Weldable renforcing steel - Bar , coil and decoiled product - Specification
|
| 80 |
|
[JIS]
JIS G 3508-1 - 2005
|
Boron steels for cold heading. Part 1:Wire rods
|
| 81 |
|
[GB]
GB /T 3077 - 1999
|
Alloy Structure Steels
|
| 82 |
|
[JIS]
JIS G 4801 - 2005
|
Spring steels
|
| 83 |
|
[JIS]
JIS G 4309 - 1999
|
Stainless steel wires
|
| 84 |
|
[BS]
BS 970-4 - 1970
|
Specification for Wrought steels in the form of blooms,billets,bars and forgings--Part 4:Valve steels
|
| 85 |
|
[BS]
BS 1449-2 - 1983
|
Steel plate, sheet and strip —Part 2: Specification for stainless and heat-resisting steel plate, sheet and strip
|
| 86 |
|
[JIS]
JIS G 4052 - 2003
|
Structural steels with specified hardenability bands
|
| 87 |
|
[GB]
GB /T 8731 - 2008
|
Free-Cutting Structural Steel
|
| 88 |
|
[JIS]
JIS G 3509-1 - 2003
|
Low-alloyed steels for cold heading. Part 1:Wire rods
|
| 89 |
|
[GB]
GB /T 4238 - 2015
|
Heat-resisting steel plate , sheet and strip
|
| 90 |
|
[GB]
GB /T 700 - 2006
|
Carbon Structural Steels
|
| 91 |
|
[GB]
GB /T 31303 - 2014
|
Austenitic-Ferritic duplex stainless steel bars
|
| 92 |
|
[JIS]
JIS G 4305 - 2005
|
Cold-rolled stainless steel plate,sheet and strip
|
| 93 |
|
[BS]
BS 970-1 - 1983
|
British Standard Specification for Wrough steels for mechanical and allied engineering purposes Part 1. General inspection and testing procedures and specific requirements for carbon,carbon manganese,alloy and stainless steels
|
| 94 |
|
[JIS]
JIS G 4053 - 2003
|
Alloy steel plate for machinery
|
| 95 |
|
[GB]
GB /T 20410 - 2006
|
Steels for turbine bolts at high temperature
|
| 96 |
|
[GB]
GB /T 6478 - 2015
|
Steels For Cold Heading And Cold Extruding
|
| 97 |
|
[GB]
GB /T 222 - 2006
|
Permissible tolerances for chemical composition of steel products
|
| 98 |
|
[JIS]
JIS G 4315 - 2000
|
Stainless steel wires for cold heading and cold forging
|
| 99 |
|
[JIS]
JIS G 4805 - 2008
|
High carbon chromium bearing steels
|
| 100 |
|
[GB]
GB /T 17107 - 1997
|
Structural Steel Grades And Mechanical Property For Forgings
|
