| 1 |
|
[EN]
EN 10085 - 2001
|
Nitriding Steels. Technical Delivery Conditions
|
| 2 |
|
[ISO]
ISO 9327 (-5) - 1999
|
Steel Forgings and Rolled or Forged Bars for Pressure Purposes-Technical Delivery Conditions-Part 5:Stainless Steels
|
| 3 |
|
[EN]
EN 10297-2 - 2005
|
Seamless Circular Steel Tubes for Mechanical and General Engineering Purposes - Technical Delivery Conditions - Part 2: Stainless Steel
|
| 4 |
|
[EN]
EN 10016-3 - 1994
|
Non-alloy steel rod for drawing and/or cold rolling — Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod
|
| 5 |
|
[ISO]
ISO 8458-2 - 2002
|
Steel Wire for Mechanical Springs — Part 2: Patented Cold-Drawn Non-Alloy Steel Wire
|
| 6 |
|
[EN]
EN 10084 - 1998
|
Case hardening steels. Technical delivery conditions
|
| 7 |
|
[EN]
EN 10216-2 - 2007
|
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties
|
| 8 |
|
[EN]
EN 10216-1 - 2004
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties
|
| 9 |
|
[EN]
EN 10025-3 - 2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
|
| 10 |
|
[DIN]
DIN 1654-2 - 1989
|
Cold Heading and Extruding Steels Technical Delivery Conditions for Killed Unalloyed Steels Not Intended for Heat Treatment
|
| 11 |
|
[EN]
EN 10283 - 1998
|
Corrosion resistant steel castings
|
| 12 |
|
[ISO]
ISO 683-11 - 1987
|
Heat-Treatable Steels, Alloy Steels and Free-cutting Steels — Part 11: Case-Hardening Steel
|
| 13 |
|
[EN]
EN 10269 - 2006
|
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
|
| 14 |
|
[DIN EN]
DIN EN 10263-4 - 2002
|
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering
|
| 15 |
|
[ISO]
ISO 4950-2 - 1995
|
High Yield Strength Flat Steel Products
|
| 16 |
|
[DIN EN]
DIN EN 10216-5 - 2014
|
Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes
|
| 17 |
|
[EN]
EN 10132-4 - 2002
|
Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 4: Spring Steels and Other Applications
|
| 18 |
|
[EN]
EN 10087 - 1999
|
Free-Cutting Steels Technical Delivery Conditions for Semi-Finished Products,Hot-Rolled Bars and Rods
|
| 19 |
|
[ISO]
ISO 8458-3 - 2002
|
Steel Wire for Mechanical Springs. Part 3:Oil-Hardened and Tempered Wire
|
| 20 |
|
[EN]
EN 10296-2 - 2005
|
Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 2 Stainless Steel
|
| 21 |
|
[EN]
EN 10028-3 - 2009
|
Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized
|
| 22 |
|
[EN]
EN 10305-1 - 2010
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
|
| 23 |
|
[EN]
EN 10059 - 2003
|
Hot Rolled Square Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions
|
| 24 |
|
[EN]
EN 10034 - 1993
|
Structural Steel I And H Sections - Tolerances on Shape and Dimensions
|
| 25 |
|
[EN]
EN 10349 - 2009
|
Steel castings - Austenitic manganese steel castings
|
| 26 |
|
[EN]
EN 10089 - 2002
|
Hot rolled steels for quenched and tempered springs; technical delivery conditions
|
| 27 |
|
[EN]
EN 10365 - 2017
|
Hot Rolled Steel Channels, I and H Sections - Dimensions and Masses
|
| 28 |
|
[EN]
EN 10143 - 2006
|
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
|
| 29 |
|
[EN]
EN 2947 - 2006
|
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <= 2,3 mm
|
| 30 |
|
[EN]
EN 10263-3 - 2001
|
Steel Rod,bars and Wire for Cold Heading and Cold Extrusion - Part 3: Technical Delivery Conditions for Case Hardening Steels
|
| 31 |
|
[EN]
EN 10083-1 - 1996
|
Steels for quenching and tempering - Part 1: General technical delivery conditions
|
| 32 |
|
[EN]
EN 10263-5 - 2001
|
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 5: Technical Delivery Conditions for Stainless Steels
|
| 33 |
|
[EN]
EN 10028-2 - 2009
|
Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
|
| 34 |
|
[EN]
EN 10268 - 2006 (+A1-2013)
|
cold rolled steel flat products with high yield strength for cold forming - technical delivery conditions
|
| 35 |
|
[ISO]
ISO 3305 - 1985
|
Plain end welded precision steel tubes - Technical conditions for delivery
|
| 36 |
|
[EN]
EN 3018 - 2019
|
Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thread inserts - D ≤ 3 mm
|
| 37 |
|
[EN]
EN 10083-3 - 2006
|
Steels for Quenching and Tempering - Part 3: Technical Delivery Conditions for Alloy Steels
|
| 38 |
|
[DIN]
DIN 17210 - 1986
|
Case Hardening Steels – Technical Delivery Conditions
|
| 39 |
|
[EN]
EN 10025-4 - 2004
|
Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
|
| 40 |
|
[EN]
EN 10088-2 - 2005
|
Stainless Steels – Part 2: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resisting Steels for General Purposes
|
| 41 |
|
[DIN]
DIN 17230 - 1980
|
Ball and Roller Bearing Steels Technical Conditions of Delivery
|
| 42 |
|
[EN]
EN 10277-2 - 2008
|
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
|
| 43 |
|
[EN]
EN 10250-3 - 1999
|
Open Die Steel Forgings for General Engineering Purposes - Part 3: Alloy Special Steels
|
| 44 |
|
[EN]
EN 10120 - 2008
|
Steel sheet and strip for welded gas cylinders
|
| 45 |
|
[EN]
EN 10255 - 2007
|
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
|
| 46 |
|
[DIN]
DIN 17100 - 1980
|
Steels for General Structural Purposes Quality Standard
|
| 47 |
|
[EN]
EN 10305-5 - 2003
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
|
| 48 |
|
[EN]
EN 10253-4 - 2003
|
Butt-Welding Pipe Fittings. Wrought Austenitic and Austenitic-Ferritic (duplex) Atainless Steels with Specific Inspection Requirements
|
| 49 |
|
[EN]
EN 10277-3 - 1999
|
Bright steel Products - Technical Delivery Conditions - Part 3: Free-Cutting Steels
|
| 50 |
|
[EN]
EN 10293 - 2005
|
Steel castings for general engineering uses
|
| 51 |
|
[EN]
EN 10095 - 1999
|
Heat Resisting Steels and Nickel Alloys
|
| 52 |
|
[EN]
EN 10250-4 - 1999
|
Open Die Steel Forgings for General Engineering Purposes - Part 4: Stainless Steels
|
| 53 |
|
[EN]
EN 10142 - 2000
|
Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming - Technical delivery conditions
|
| 54 |
|
[ISO]
ISO 4955 - 1994
|
Heat-Resistant Steels and Alloy
|
| 55 |
|
[EN]
EN 10297-1 - 2003
|
Seamless Steel Tubes for Mechanical and General Engineering Purposes - Technical Delivery Conditions - Part 1: Non-Alloy and Alloy Steel Tubes
|
| 56 |
|
[EN]
EN 10219-2 - 2019
|
Cold Formed Welded Steel Structural Hollow Sections - Part 2: Tolerances, Dimensions and Sectional Properties
|
| 57 |
|
[EN]
EN 10090 - 1998
|
Valve steels and alloys for internal combustion engines
|
| 58 |
|
[EN]
EN 10025-2 - 2004
|
Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels
|
| 59 |
|
[ISO]
ISO 630-2 - 2011
|
Structural Steels - Part 2: Technical Delivery Conditions for Structrual Steels for General Purposes
|
| 60 |
|
[ISO]
ISO 683-18 - 1996
|
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels - Part 18: Bright Products of Unalloyed and Low Alloy Steels
|
| 61 |
|
[ISO]
ISO TS 15510 - 2003
|
Stainless Steels-Chemical Composition
|
| 62 |
|
[EN]
EN 10208-2 - 2009
|
Steel pipes for pipelines for combustible fluids. Technical delivery conditions
|
| 63 |
|
[ISO]
ISO 4951-2 - 2001
|
High Yield Strength Steel Bars and Sections — Part 2: Delivery Conditions for Normalized, Normalized Rolled and As-Rolled Steels
|
| 64 |
|
[EN]
EN 10207 - 2005
|
Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
|
| 65 |
|
[EN]
EN 10263-2 - 2001
|
Steel Rod,bars and Wire for Cold Heading and Cold Extrusion - Part 2: Technical Delivery Conditions for Steels Not Intended for Heat Treatment after Cold Working
|
| 66 |
|
[EN]
EN 10263-4 - 2001
|
Steel Rod, Bars and Wire for Cold Heading and Cold Extrusion - Part 4: Technical Delivery Conditions for Steels for Quenching and Tempering
|
| 67 |
|
[ISO]
ISO 630 - 1995 (Amd1:2003)
|
Structural Steels--Plates,Wide Flats,bars,Sections and Profiles
|
| 68 |
|
[EN]
EN 10295 - 2002
|
Heat resistant steel castings
|
| 69 |
|
[EN]
EN 10273 - 2000
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
| 70 |
|
[ISO]
ISO 683-9 - 1988
|
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 9: Wrought Free-Cutting Steels
|
| 71 |
|
[DIN]
DIN 1651 - 1988
|
Free-Cutting Steels Technical Delivery Conditions
|
| 72 |
|
[EN]
EN 10222-2 - 2000
|
Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
|
| 73 |
|
[EN]
EN 13835 - 2002 (+A1 2006)
|
Founding - Austenitic cast irons
|
| 74 |
|
[ISO]
ISO 683-14 - 2004
|
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 14: Hot-Rolled Steels for Quenched and Tempered Springs
|
| 75 |
|
[DIN]
DIN 17224 - 1982
|
Stainless Steel Wire and Strip for Springs; Technical Delivery Conditions
|
| 76 |
|
[EN]
EN 10088-3 - 2005
|
Stainless Steels--Part 3:Techincal Delivery Conditions for Semi-Finished Products,Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
|
| 77 |
|
[ISO]
ISO 683-13 - 1986
|
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 13: Wrought Stainless Steels
|
| 78 |
|
[EN]
EN 10250-2 - 2000
|
Open Die Steel Forgings for General Engineering Purposes - Part 2: Non-Alloy Quality and Special Steels
|
| 79 |
|
[EN]
EN 10088-1 - 2005
|
Stainless Steels. Part 1:List of Stainless Steels
|
| 80 |
|
[EN]
EN 10016-2 - 1994
|
Non-alloy steel rod for drawing and/or cold rolling — Part 2: Specific requirements for general purpose rod
|
| 81 |
|
[EN]
EN 10224 - 2002
|
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
|
| 82 |
|
[ISO]
ISO 1127 - 1992
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| 83 |
|
[EN]
EN 10296-1 - 2003
|
Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 1: Non-Alloy and Alloy Steel Tubes
|
| 84 |
|
[EN]
EN 10083-2 - 2006
|
Steels for quenching and tempering. Part 2:Technical delivery conditions for non alloy steels
|
| 85 |
|
[DIN]
DIN 17200 - 1987
|
Steels for Quenching and Tempering; Technical Delivery Conditions
|
| 86 |
|
[ISO]
ISO 683-1 - 1987
|
Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 1:Direct-Hardening Unalloyed and Low-Alloyed Wrought Steel in form of Different Black Produts
|
| 87 |
|
[EN]
EN 10269 - 2013
|
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
|
| 88 |
|
[EN]
EN 10302 - 2008
|
Creep Resisting Steels,Nickel and Cobalt Alloys
|
| 89 |
|
[ISO]
ISO 3304 - 1985
|
Plain end seamless precision steel tubes - Technical conditions for delivery
|
| 90 |
|
[ISO]
ISO 9327 (-3) - 1999
|
Steel Forgings and Rolled or Forged Bars for Pressure Purposes-Technical Delivery Conditions-Part 3:Nickel Steels with Specified Low Temperature Properties
|
| 91 |
|
[EN]
EN 10210-1 - 2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
|
| 92 |
|
[EN]
EN 10060 - 2003
|
Hot Rolled Round Steel Bars for General Purposes - Dimensions and Tolerances on Shape and Dimensions
|
| 93 |
|
[ISO]
ISO 4955 - 2005
|
Heat-resistant Steels
|
| 94 |
|
[DIN]
DIN 17440 - 1972
|
Stainless Steel Quality Standards
|
| 95 |
|
[ISO]
ISO 683-16 - 1976
|
Heat-Treated Steels, Alloy Steels and Free-Cutting Steels — Part 16: Precipitation Hardening Stainless Steels
|
| 96 |
|
[ISO]
ISO 4954 - 1993
|
Steels for Cold Heading and Cold Extruding
|
| 97 |
|
[EN]
EN 10305-2 - 2002
|
Steel tubes for Precision Applications - Technical Delivery Conditions - Welded Cold Drawn Tubes
|
| 98 |
|
[DIN EN]
DIN EN 10025 - 1994
|
Hot rolled products of non-alloyed structural steels Technical delivery conditions
|
| 99 |
|
[DIN EN]
DIN EN 10095 - 2018
|
Heat Resisting Steels and Nickel Alloys
|
| 100 |
|
[DIN EN]
DIN EN 10220 - 2003
|
Seamless and Welded Steel Tubes - Dimensions and Masses Per Unit Length
|
