| 简体 | 繁體 |

Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles

GB /T 13576.1 - 2008

Similar Standards

1 Pipe threads where pressure-tight joints are not made on the threads [ISO]
ISO 228-1 - 2000
Pipe threads where pressure-tight joints are not made on the threads
2 Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.1.1-1) - 2024
Dimensions of Threads and Points for Types AB and ABR Thread-Forming Tapping Screws
3 Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.1.4-1) - 2024
Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
4 Lag screw threads [Table 16] [ASME/ANSI]
ASME/ANSI B 18.2.1 (T16) - 2010
Lag screw threads [Table 16]
5 Type A, Thread Forming Tapping Screws  [Table E1] [ASME]
ASME B 18.6.4 (A) - 1998 (R2005)
Type A, Thread Forming Tapping Screws [Table E1]
6 Typ C, Thread Forming Tapping Screws  [Table V1] [ASME]
ASME B 18.6.4 (C) - 1998 (R2005)
Typ C, Thread Forming Tapping Screws [Table V1]
7 Asymmetrical thread HD [Figure 6] [ISO]
ISO 9268 (F6) - 1988
Asymmetrical thread HD [Figure 6]
8 Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T41) - 2013
Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
9 Thread and body dimeters for wood screws [Table 1] [ASME/ANSI]
ASME/ANSI B 18.6.1 (T1) - 1981 (R2016)
Thread and body dimeters for wood screws [Table 1]
10 Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T40) - 2013
Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws
11 Deviations for constructional screw threads [ISO]
ISO 965-3 - 1998
Deviations for constructional screw threads
12 Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468) [ASME/ANSI]
ASME/ANSI B 18.31.3 - 2009
Threaded rods(inch series) (A307, F1554, A193, CRES,F593,F468)
13 Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T42) - 2013
Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
14 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits [DIN]
DIN 2510-2 - 1971
Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
15 AB self-tapping teeth [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
AB self-tapping teeth
16 Whitworth pipe threads for pipe unions [DIN]
DIN 3858 - 2005
Whitworth pipe threads for pipe unions
17 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions,  tolerances and designation [ISO]
ISO 7-1 - 1994
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
18 ISO inch screw threads─Basic dimensions [ISO]
ISO 725 - 2009
ISO inch screw threads─Basic dimensions
19 self-tapping teeth-B [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
self-tapping teeth-B
20 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data [ISO]
ISO 965-1 - 2013
ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
21 Metric Self-tapping Thread End [IFI]
IFI 502 - 1982
Metric Self-tapping Thread End
22 ISO metric trapezoidal screw threads - Basic and design profiles [ISO]
ISO 2901 - 2016
ISO metric trapezoidal screw threads - Basic and design profiles
23 Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws [ASME]
ASME B 18.6.3 (T4.1.1.2-1) - 2024
Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
24 Wood thread [Table 1] [ASME/ANSI]
ASME/ANSI B 18.6.1 (T1) - 1997
Wood thread [Table 1]
25 Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths [ISO]
ISO 888 - 2012
Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths
26 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts [ISO]
ISO 262 - 1998
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
27 Thread and thread ends for wood screws [DIN]
DIN 7998 - 1975
Thread and thread ends for wood screws
28 ISO general purpose metric screw threads - General plan [ISO]
ISO 261 - 1998
ISO general purpose metric screw threads - General plan
29 Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws [ASME]
ASME B 18.6.3 (T4.3.1-1) - 2024
Thread Lengths for Types A, AB, B, BF, BP, and BT Tapping Screws
30 Aerospace - Lead and runout threads - Part 1: Rolled external threads [ISO]
ISO 3353-1 - 2020
Aerospace - Lead and runout threads - Part 1: Rolled external threads
31 ISO general-purpose metric screw threads─Basic dimensions [ISO]
ISO 724 - 1993
ISO general-purpose metric screw threads─Basic dimensions
32 Tapping Screws Thread [ISO]
ISO 1478 - 1999
Tapping Screws Thread
33 Triangle lock self-tapping teeth--D、F、G [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
Triangle lock self-tapping teeth--D、F、G
34 Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws [ASME]
ASME B 18.6.3 (T4.3.2.1) - 2024
Thread Lengths for Types C, D, F, G, T, and TRS Tapping Screws
35 Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation [EN]
EN 10226-1 - 2004
Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
36 Symmetrical thread HC [Figure 4] [ISO]
ISO 9268 (F4) - 1988
Symmetrical thread HC [Figure 4]
37 Threads and thread ends for tapping screws [DIN]
DIN 7970 - 1984
Threads and thread ends for tapping screws
38 Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T46) - 2013
Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws
39 Type AB, Thread Forming Tapping Screws [Table 5] [ASME]
ASME B 18.6.4 (AB) - 1998 (R2005)
Type AB, Thread Forming Tapping Screws [Table 5]
40 HB Thread [Figure 4] [ISO]
ISO 5835 (F4) - 1991
HB Thread [Figure 4]
41 Limits of sizes for general purpose external and internal screw threads [ISO]
ISO 965-2 - 1998
Limits of sizes for general purpose external and internal screw threads
42 Metric triangle lock with thread end [IFI]
IFI 502 - 1982
Metric triangle lock with thread end
43 Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T47) - 2013
Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws
44 Type B and BP, Thread Forming Tapping Screws [Table 6] [ASME]
ASME B 18.6.4 (B/BP) - 1998 (R2005)
Type B and BP, Thread Forming Tapping Screws [Table 6]
45 HA Thread [Figure 2] [ISO]
ISO 5835 (F2) - 1991
HA Thread [Figure 2]
46 ISO - Metric Trapezoidal Screw Threads [DIN]
DIN 103 - 1 - 1977
ISO - Metric Trapezoidal Screw Threads
47 Wood thread [Table 1] [ASME/ANSI]
ASME/ANSI B 18.6.1 (T1) - 1981
Wood thread [Table 1]
48 Self-tapping teeth-BF [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010
Self-tapping teeth-BF
49 Plastic threads [DIN]
DIN 7505 - 1986
Plastic threads
50 The blank diameters for rolling general purpose metric screw threads [GB]
GB /T 18685 - 2017
The blank diameters for rolling general purpose metric screw threads
51 Internal thread for wire thread inserts [GB]
GB /T 24425.5 - 2009
Internal thread for wire thread inserts
52 Limits of sizes and tolerances for metric coarse screw threads [JIS]
JIS B 0209 - 1997
Limits of sizes and tolerances for metric coarse screw threads
53 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 1995
Tapping Screw Threads and Ends
54 Specification for wood screws [GB]
GB /T 922 - 1986
Specification for wood screws
55 General purpose metric screw threads - The plan for pipe systems [GB]
GB /T 1414 - 2003
General purpose metric screw threads - The plan for pipe systems
56 General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan [GB]
GB /T 9146 - 2003
General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan
57 General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan [GB]
GB /T 9145 - 2003
General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan
58 Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983) [GB]
GB /T 3 - 1997
Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)
59 Metric threads where pressure-tight joints are made on the threads [GB]
GB /T 1415 - 2008
Metric threads where pressure-tight joints are made on the threads
60 Dryseal pipe threads with the thread angle of 60 degrees [GB]
GB /T 27944 - 2011
Dryseal pipe threads with the thread angle of 60 degrees
61 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads(eqv ISO 7-1:1994) [GB]
GB /T 7306.1 - 2000
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads(eqv ISO 7-1:1994)
62 Tapping screws thread [GB]
GB /T 5280 - 2002
Tapping screws thread
63 Thread and point details for Type A threads  [TABLE 23] [BS]
BS 4174 - 1972
Thread and point details for Type A threads [TABLE 23]
64 General purpose metric screw threads - Tolerances [GB]
GB /T 197 - 2018
General purpose metric screw threads - Tolerances
65 Miniature screw threads : Profiles , general plan and basic dimensions [GB]
GB /T 15054.1 - 2018
Miniature screw threads : Profiles , general plan and basic dimensions
66 General purpose metric screw threads - Basic dimenslons [GB]
GB /T 196 - 2003
General purpose metric screw threads - Basic dimenslons
67 General purpose metric screw threads - Limits of sizes [GB]
GB /T 15756 - 2008
General purpose metric screw threads - Limits of sizes
68 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 2015
Tapping Screw Threads and Ends
69 Tapping screw threads and ends [JIS]
JIS B 1125 (1) - 2003
Tapping screw threads and ends
70 Trapezoidal screw threads - Part 1: Profiles [GB]
GB /T 5796.1 - 2005
Trapezoidal screw threads - Part 1: Profiles
71 Locking threads with 30 degree wedge ramp [GB]
GB /T 37462 - 2019
Locking threads with 30 degree wedge ramp
72 Thread and point details for Type Y thread cutting screws  [TABLE 6] [BS]
BS 4174 - 1972
Thread and point details for Type Y thread cutting screws [TABLE 6]
73 The threads for transition fit [GB]
GB 1167 - 1996
The threads for transition fit
74 Pipe threads where pressure-tight joints are made on the threads [GB]
GB 7306 - 1987
Pipe threads where pressure-tight joints are made on the threads
75 Unified screw threads - General plan [GB]
GB /T 20670 - 2006
Unified screw threads - General plan
76 General purpose metric screw threads - Preferable plan [GB]
GB /T 9144 - 2003
General purpose metric screw threads - Preferable plan
77 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads(eqv ISO 7-1:1994) [GB]
GB /T 7306.2 - 2000
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads(eqv ISO 7-1:1994)
78 General purpose metric screw threads - Limit deviations [GB]
GB /T 2516 - 2003
General purpose metric screw threads - Limit deviations
79 General purpose metric screw threads-Basic profile(ISO 68-1:1998, MOD) [GB]
GB /T 192 - 2003
General purpose metric screw threads-Basic profile(ISO 68-1:1998, MOD)
80 Screws thread shanks for thread forming  screw-Metric coarse thread series [GB]
GB /T 6559 - 1986
Screws thread shanks for thread forming screw-Metric coarse thread series
81 Limit gauges for metric screw threads [JIS]
JIS B 0251 - 2008
Limit gauges for metric screw threads
82 The interference-fit threads [GB]
GB /T 1181 - 1998
The interference-fit threads
83 Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads [GB]
GB /T 7307 - 2001
Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads
84 Screw Threads - UNJ Profile, Inch [SAE]
SAE AS 8879 - 2001
Screw Threads - UNJ Profile, Inch
85 Screw Threads for Thread Forming Tapping Screws - Dimensions [IS]
IS 5957 - 2003
Screw Threads for Thread Forming Tapping Screws - Dimensions
86 ISO general purpose metric screw threads - General plan [IS]
IS 4218 (-2) - 2001
ISO general purpose metric screw threads - General plan
87 US triangle lock thread-S type [Others]
YJT 1025 - 2012
US triangle lock thread-S type
88 Metric triangle lock thread-S type [Others]
YJT 1026 - 2012
Metric triangle lock thread-S type
89 Metric triangle lock thread-C type [Others]
YJT 1027 - 2012
Metric triangle lock thread-C type
90 Metric triangle lock thread-B type [Others]
YJT 1028 - 2012
Metric triangle lock thread-B type
91 Metric triangle lock thread-P type [Others]
YJT 1029 - 2012
Metric triangle lock thread-P type