Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [MJ/UNJ] MJ/UNJ threads

Internal Driving

External Driving

Locking Type

Shank

Point

EN 1665 (R) - 1997
Hexagon Bolt with Flange, Heavy Series, Reduced Shank (Type R) View Suppliers
EN 1665 (S) - 1997
Hexagon Bolts with Flange, Heavy Series, Full Shank (Type S) View Suppliers
EN 1662 - 1997
Hexagon Bolts with Flange - Small Series View Suppliers
EN 3006 - 1994
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 3007 - 1996
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650℃ View Suppliers
EN 2884 - 2024
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
EN 28750 - 1992
Spring-Type Straight Pins - Coiled, Standard Duty
EN 28673 - 1991
Hexagon Nuts, Style 1, with Metric Fine Pitch Thread - Product Grades A and B
EN 14399-7 (Cs bolt) - 2018
High-Strength Structural Bolting Assemblies for Preloading - Part 7: System HR - Countersunk Head Bolt
EN 14399-10 (HR) - 2018
High-Strength Structural Bolting Assemblies for Preloading - System HRC - Regular Nuts (HR)
EN 3008 - 1998
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at Ambient Temperature)/650°C
EN 22339 - 1992
Taper Pins Unhardened
EN 24034 - 1991
Hexagon Nuts - Product Grades C
EN 28741 - 1992
Grooved Pins - Half-length Reverse-taper Grooved
EN 2944 - 2018
Aerospace Series-Inserts, Screw Thread, Helical Coil, Self-Lockong, In Corrosion Resisting Steel FE-PA3004
EN 10230-1 (T2) - 2000
Circular, Flat and Flat Countersunk Head, Grooved Shank Nails
EN 22341 - 1992
Clevis Pins with Head
EN 14399-9 (HB washer) - 2009
High-strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV — Bolt Face Washers (HB)
EN 1677-5 - 2001 (+A1:2008)
Forged Steel Lifting Hooks with Latch, Grade 4
EN 24016 - 1991
Hexagon Head Bolls: Product Grade C

Previous

1 2 3 4 5 6

Product Category

Tubular Rivet, Solid Rivet

Non-Standard Rivet, Shoulder Rivet GB/DIN/SNSI/ASTM/JIS/ISO/BS/EN/ANSI Split Rivet, Self-Clinching, Drive Rivet

Rings

E type retaining rings, push nuts for shaft External circlips, internal circlips Retaining clips for shaft, Snap rings for bearings

Hex Nut, Non-Metallic Insert

Prevailing Torque Type, Heavy Duty Double Chamfer Nut, Domed Nut, T Nut Wing Nut, Slotted Nut, Plastic, Square Nut

Washers

Conical contact washers, double fold self-locking washers External serrated lock washers, internal serrated lock washers Lock washers for slotted round, wave spring washers for bearing

Torx, Pan Head, Hexalobular Socket

Small Pan Head, Hexalobular Socket Hex Head, Combination of Small Screw DIN, ISO, ASMEB, JISB, ANSIB, GB

Double End Stud, Threaded Rod

U Bolt Chamfered Threaded, SUS Marble GB, DIN

Knurled, Flanged, Carriage Bolt

Embedded T Bolt, Mushroom Head Square Neck, Heavy Duty DIN933 DIN931 DIN603, GB, JIS, ANSIB

Customized Screws

Stainless steel screws Stainless steel self-tapping screws Carbon steel dry-wall screws

Custom Bolt, Custom Screw

Non-Standard, Customized GB/DIN/SNSI/JIS/ISO/ANSI Automotive Fastener

Rivets

Rivet nuts Rivet studs Rivet screws

Leave a Message