Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Thread Type

[M] Metric [UN] UNC/UNF/UNEF/UNR/UNRC/UNRF/UNS/... [MJ/UNJ] MJ/UNJ threads [ST] Self-Tapping [R] [Rc] [Rp] [R1] 55°Pipe Threads where Pressure-Tight Joints are made on the threads [G] 55°Pipe Threads where Pressure-Tight Joints are not made on the threads [Tr] Trapezoidal Thread Other thread

Internal Driving

External Driving

Locking Type

Shank

Point

ISO 13918 (IT) - 1998
Stud with Internal Thread for Arc Stud Welding (IT) View Suppliers
ISO 7049 - 2011
Cross Recessed Pan Head Tapping Screws View Suppliers
ISO 15984 - 2002
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - A2/A2 View Suppliers
ISO 7380-1 - 2011
Hexagon Socket Button Head Screws View Suppliers
ISO 6149-2 (LN) - 2006
Lock Nut, Heavy-duty (S series) View Suppliers
ISO 8748 - 2007
Spring-Type Straight Pins-Coiled, Heavy Duty View Suppliers
ISO 7048 - 2011
Cross Recessed Cheese Head Screws View Suppliers
ISO 13337 - 2009
Spring - Type Straight Pins - Slotted,Light Duty View Suppliers
ISO 4026 - 1993
Hexagon Socket Set Screws with Flat Point View Suppliers
ISO 7379 - 1983
Hexagon Socket Head Shoulder Screws View Suppliers
ISO 13918 (PT) - 2017
Stud Welding with Tip Ignition - Threaded Stud - Type PT View Suppliers
ISO 15973 - 2000
Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St View Suppliers
ISO 15982 - 2002
Open End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA/AIA View Suppliers
ISO 7050 - 2011
Cross Recessed Countersunk (Flat) Head Tapping Screws View Suppliers
ISO 15072 - 2012
Hexagon Bolts with Flange, Metric Fine Pitch Thread,Small Series, Product Grade A View Suppliers
ISO 8434-1 (N) - 2018
Tube Nut View Suppliers
ISO 14579 - 2011
Hexalobular Socket Head Cap Screws View Suppliers
ISO 8734 - 1997
Parallel Pins, of Hardened Steel and Martensitic Stainless Steel (Dowel Pins) View Suppliers
ISO 4014 - 1999
Hexagon Head Bolts - Product Grades A and B View Suppliers
ISO 21670 - 2014
Hexagon Weld Nuts with Flange View Suppliers

1 2 3 4 5 6 7 8 9 10

Product Category

Coiled Pins

Custom Washers

Washers

Conical contact washers, double fold self-locking washers External serrated lock washers, internal serrated lock washers Lock washers for slotted round, wave spring washers for bearing

Self-tapping, Torx, Customized

Cutting Tail, Countersunk Head, Flat Head Button Head, Pan Head, Cheese Head DIN, ISO, ASMEB, JISB, ANSIB, Flanged

Non-standard Fasteners

Washers Rings Pins

Compression Limiters

Rings

E type retaining rings, push nuts for shaft External circlips, internal circlips Retaining clips for shaft, Snap rings for bearings

Nuts

Hex. nuts Thin nuts Flange nuts

Washers

Retaining rings Disc springs Flat washers

Installation Equipment

Leave a Message