Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Standards

ASME BS DIN EN GB GOST SAE ISO JIS NF IS YJT Others

Thread Type

[M] Metric [UN] UNC/UNF/UNEF/UNR/UNRC/UNRF/UNS/... [MJ/UNJ] MJ/UNJ threads [ST] Self-Tapping

Internal Driving

External Driving

Locking Type

Shank

Point

DIN 1444 - 1974
Clevis Pins with Head View Suppliers
DIN EN 22341 - 1992
Clevis Pins with Head View Suppliers
DIN 7643 - 2005
Compression Couplings - Hollow Screws For Ring-Type Banjos View Suppliers
GB 28 - 1976
Hexagon Fit Bolts with Split Pin Hole on Shank View Suppliers
GB /T 882 - 1986
Clevis Pins with Head View Suppliers
GB /T 882 - 2008
Clevis Pin with Head - Type A and B View Suppliers
GB /T 28 - 2013
Hexagon Fit Shank Bolts with Split Pin Hole on Shank View Suppliers
GB 28 - 1988
Hexagon Fit Bolts with Split Pin Hole on Shank - Product Grade A and B View Suppliers
DIN EN 4178 - 2017
Aerospace Series Screws, Pan Head, Six Lobe Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Titanium Alloy, Anodized
EN 2884 - 2024
Aerospace Series - Screws, Pan Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature)/315℃
DIN 65526 - 2016
Aerospace Series - Hexagon Bolts, Close Tolerance, with Short-length MJ Thread, Titanium Alloy, Nominal Tensile Strength 1100 Mpa, for Temperatures up to 315℃
DIN 74305-1 - 1987
Compression Couplings; Hollow Screw
DIN 48073 - 1975
Connecting Bolts for Overhead Power Lines - Form S
ASME B 18.8.8M (B) - 1994
Metric Clevis Pin with Head, Type B
DIN 48073 - 1975
Connecting Bolts For Overhead Power Lines - Form N
ASME B 18.8.200M (B18.8.7M - Type B) - 2000
Metric Parallel Pins With Split Pin Hole
DIN 1479 - 2005
Hexagon Turnbuckles
ISO 2340 (B) - 1986
Clevis Pins Without Head - Type B
DIN 1434 - 1977
Clevis Pins with Small Head; Finish M
ASME B 18.8.200M (B18.8.8M-Type B) - 2000
Metric Clevis Pin with Head - Type B

Previous

1 2 3 4 5

Product Category

Washers

Retaining rings Disc springs Flat washers

Customized CNC Milling&Turning Parts

Brass Copper Hex Bolt, Nut, Washer DIN, GB

Rivet Parts

Rivet screws/Rivet studs Blind rivets/Hand-tightened screws Rivet nuts/Copper nuts

Washers

Lock washers Disc washers Spring washers

Serrated Lock, Circlip Washer

Square Taper Washer, Knurled Disc Self-locking, Wave Spring Washer GB, DIN, ANSIB, JISB, Curved Washer

Auto Parts

Flange bolts Hex bolts Assembling bolts

Closed End, Open End, Double Drum

Custom Rivet Nut, Break Pull Mandrel Hemlok, Outer Lock, Inner Lock, GB Clinching Nut, Self-Clinching Stud

Blind Rivets

Open type blind rivets Closed end blind rivets Stainless steel rivets

Set Screws

Stainless steel Hex. High-strength

Steel Bolts

Full partial thread fasteners Special size from kinsom Copper coating

Leave a Message