Standard & CAD & Supplier-Global Fastener Platform

| 简体 | 繁體 |

Categories Filters

Applied filters

Standards

ASME BS Self-Clinching

Thread Type

[M] Metric [UN] UNC/UNF/UNEF/UNR/UNRC/UNRF/UNS/... [ST] Self-Tapping

Internal Driving

External Driving

Locking Type

Shank

Point

ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 12]
ASME B 18.6.4 - 1998 (R2005)
Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 11]
ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table VI4]
ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed Undercut Oval Countersunk Head Tapping Screws - Type C Thread Forming [Table 27]
ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table VI4]
ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed Undercut Oval Countersunk Head Tapping screws - Type AB Thread Forming [Table 27]
ASME B 18.6.4 - 1998 (R2005)
Type IA Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type B and BP Thread Forming [Table 18]
ASME B 18.6.4 - 1998 (R2005)
Type IA Cross Recessed Oval Countersunk Head Tapping Screws - Type A Thread Forming [Table 22]
ASME B 18.6.3 (H1D-I/H1D-IA) - 2024
100° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-4 I/IA]
ASME B 18.6.4 - 1998 (R2005)
Type I Cross Recessed Oval Countersunk Head Tapping Screws - Type C Thread Forming [Table 21]
ASME B 18.6.4 - 1998 (R2005)
Type I Cross Recessed Truss Head Tapping Screws - Type A Thread Forming [Table F2]
ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 16]
ASME B 18.6.4 - 1998 (R2005)
Type IA Cross Recessed Undercut Oval Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 26]
ASME B 18.6.4 - 1998 (R2005)
Type I Cross Recessed Fillister Head Tapping Screws - Type C Thread Forming [Table 36]
ASME B 18.6.3 (T6-I/T6-IA) - 2013
Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
ASME B 18.6.4 - 1998 (R2005)
Type IA Cross Recessed Oval Countersunk Trim Head Tapping Screws - Type C Thread Forming [Table 29]
ASME B 18.6.4 - 1998 (R2005)
Type II Cross Recessed Truss Head Tapping Screws - Type B and BP Thread Forming [Table F4]
ASME B 18.6.3 (T28-I/T28-IA) - 2013
Cross Recessed Raised Cheese Head Screws
ASME B 18.6.4 - 1998 (R2005)
Type IA Cross Recessed Oval Countersunk Trim Head Tapping Screws - Type B and BP Thread Forming [Table 29]
ASME B 18.6.4 - 1998 (R2005)
Type IA Cross Recessed Oval Countersunk Trim Head Tapping Screws - Type A Thread Forming [Table 29]

1 2 3 4 5 6 7 8 9

Product Category

Wire Thread Insert, Positioning Pin

Cotter Pin, Spring Cotter, Threaded Insert Tail Type, Slotted Self-tapping, 3 Hole Wire Pin, DIN, GB, Dowel Pin

Automotive Accessories Parts

Metal steel screws Fasteners customized Cold forging process

Closed End, Open End, Double Drum

Custom Rivet Nut, Break Pull Mandrel Hemlok, Outer Lock, Inner Lock, GB Clinching Nut, Self-Clinching Stud

Washers

Lock washers Disc washers Spring washers

Rings

E type retaining rings, push nuts for shaft External circlips, internal circlips Retaining clips for shaft, Snap rings for bearings

Blind Rivets

Open type blind rivets Closed end blind rivets Stainless steel rivets

Flat Point, Cup Point, Cone Point

DIN906, DIN908, DIN910, DIN916 DIN913, DIN914, ANSI18.3, DIN916 DIN, ISO, ASMEB, JISB, ANSIB, GB

Rivet Parts

Rivet screws/Rivet studs Blind rivets/Hand-tightened screws Rivet nuts/Copper nuts

Serrated Lock, Circlip Washer

Square Taper Washer, Knurled Disc Self-locking, Wave Spring Washer GB, DIN, ANSIB, JISB, Curved Washer

Custom Bolt, Custom Screw

Non-Standard, Customized GB/DIN/SNSI/JIS/ISO/ANSI Automotive Fastener

Leave a Message