简体 | 繁體 | FastenerExpo |

Click Specification

Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St

DIN EN ISO 15974 - 2001

Display drawing:

德标DIN EN ISO 15974 - 2001 DIN EN ISO1597 Closed End Blind Rivets With Break Pull Mandrel And Countersunk Head - AIA/St
Nominal Diameter
d
Φ3.2 Φ4 Φ4.8
d max
min
dk max
min
k max
d1 max
L1 min
Shear load/N(min)
Tensile load/N(min)
Mandrel break load/N(max)
3.28 4.08 4.88
3.05 3.85 4.65
6.7 8.4 10.1
5.8 6.9 8.3
1.3 1.7 2
1.85 2.35 2.77
25 25 27
1100 1600 2200
1450 2200 3100
3500 5000 7000
①,Material: Rivet body made of aluminium alloy (AlA) and a mandrel made of steel (St) . Material specification is at the discretion of the manufacturer. Mechanical properties: The minimum shear load, minimum tensile load and maximum mandrel break load shall be as specified in Table 3
when tested in accordance with ISO 1 4589.