简体 | 繁體 | FastenerExpo |

Slotted Round Washer Head Screws [Table 38] (ASTM F837, F468)

ASME B 18.6.3 (T38) - 2013

Display drawing:

美标ASME B18.6.3 (T38) - 2013 ASME18.6.3 1 Slotted Round Washer Head Screws [Table 38] (ASTM F837, F468)
Thread Size
d
2# 3# 4# 5# 6# 7# 8# 10# 12# 14#
d Nominal Size
PP
dk Ref.
dc max
min
k max
min
c Ref.
n max
min
t max
min
0.0860 0.0990 0.1120 0.1250 0.1380 0.1510 0.1640 0.1900 0.2160 0.2420
56 48 40 40 32 - 32 24 24 -
0.136 0.156 0.177 0.198 0.218 0.238 0.259 0.300 0.341 0.382
0.202 0.232 0.261 0.291 0.321 0.350 0.380 0.439 0.498 0.558
0.186 0.215 0.243 0.272 0.301 0.330 0.358 0.416 0.473 0.531
0.062 0.070 0.079 0.088 0.096 0.105 0.113 0.130 0.148 0.165
0.050 0.058 0.067 0.075 0.084 0.092 0.101 0.118 0.134 0.151
0.030 0.030 0.030 0.040 0.040 0.040 0.040 0.050 0.050 0.050
0.031 0.035 0.039 0.043 0.048 0.048 0.054 0.060 0.067 0.075
0.023 0.027 0.031 0.035 0.039 0.039 0.045 0.050 0.056 0.064
0.037 0.042 0.048 0.053 0.058 0.060 0.067 0.071 0.085 0.095
0.030 0.034 0.038 0.041 0.043 0.045 0.051 0.055 0.067 0.080
Thread Size
d
1/4 16# 18# 5/16 20# 24# 3/8 7/16 1/2
d Nominal Size
PP
dk Ref.
dc max
min
k max
min
c Ref.
n max
min
t max
min
0.2500 0.2680 0.2940 0.3125 0.3200 0.3720 0.3750 0.4375 0.5000
20 - - 18 - - 16 14 13
0.396 0.423 0.661 0.494 0.505 0.587 0.593 0.691 0.790
0.576 0.617 0.676 0.719 0.736 0.854 0.861 1.004 1.146
0.548 0.588 0.646 0.687 0.703 0.818 0.825 0.963 1.101
0.170 0.182 0.199 0.211 0.216 0.251 0.253 0.294 0.335
0.157 0.168 0.185 0.197 0.202 0.236 0.238 0.278 0.319
0.050 0.060 0.060 0.060 0.060 0.060 0.060 0.070 0.090
0.075 0.075 0.084 0.084 0.084 0.094 0.094 0.094 0.106
0.064 0.064 0.072 0.072 0.072 0.081 0.081 0.081 0.091
0.098 0.105 0.113 0.118 0.125 0.137 0.139 0.165 0.180
0.083 0.088 0.094 0.100 0.115 0.115 0.117 0.140 0.155
②,7#, 14#, 16#, 18#, 20#, 24# are for tapping screws only.
⑥,Machine Screw Length of Thread 1) Sizes No.5 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in. 2) Sizes No.6 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified.
⑦,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread.