简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:inch

Grooved Pins - Type E

ASME B 18.8.2 - 2020

Display drawing:

美标ASME B18.8.2 - 2020 ASME18.8.2 18.8.2A Grooved Pins - Type E
Nominal Diameter
(1/32) (3/64) 1/16 (5/64) 3/32 (7/64) 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2
Nominal Size
d max
min
c Nominal Size
R max
min
Minimum Double-Shear Load, lb, (Low Carbon Steel)
Minimum Double-Shear Load, lb, (Alloy Steel, HRC40~48)
Minimum Double-Shear Load, lb, (Corrosion Resistant Steel)
Minimum Double-Shear Load, lb, (Brass)
0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.1563 0.1875 0.2188 0.2500 0.3125 0.3750 0.4375 0.5000
0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.1563 0.1875 0.2188 0.2500 0.3125 0.3750 0.4375 0.5000
0.0297 0.0454 0.0610 0.0766 0.0923 0.1074 0.1230 0.1543 0.1855 0.2168 0.2480 0.3105 0.3730 0.4355 0.4980
- - 0.0065 0.0087 0.0091 0.0110 0.0130 0.0170 0.0180 0.0220 0.0260 0.0340 0.0390 0.0470 0.0520
- - 0.088 0.104 0.135 0.150 0.166 0.198 0.260 0.291 0.322 0.385 0.479 0.541 0.635
- - 0.068 0.084 0.115 0.130 0.146 0.178 0.240 0.271 0.302 0.365 0.459 0.521 0.615
100 220 410 620 890 1220 1600 2300 3310 4510 5880 7660 11000 15000 19600
180 400 720 1120 1600 2180 2820 4520 6440 8770 11500 17900 26000 35200 46000
140 300 540 860 1240 1680 2200 3310 4760 6480 8460 12700 18200 24800 32400
60 140 250 390 560 760 990 1540 2220 3020 3950 6170 9050 12100 15800
①,Material
1)low carbon or alloy steel
2)corrosion resistant stee , monel, brass, and other nonferrous metals

Alternative history

ASME B 18.8.2 - 2000(R2010) ASME B 18.8.2 - 2020
Send Inquiry

Similar Standards

1 Grooved Pins - Type E [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type E
2 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved pins - Type F
3 Grooved Pins -- Half-Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8743 - 1998 		Grooved Pins -- Half-Length Centre Grooved
4 Grooved pins metric series with half-length grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Grooved pins metric series with half-length grooved
5 Metric grooved pins, full-length parallel grooved-metric series [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins, full-length parallel grooved-metric series
6 Metric grooved pins with one third length groove in the middle [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins with one third length groove in the middle
7 Metric grooved pins—half-length centre grooved [ASME/ANSI]
ASME/ANSI B 18.8.100M - 2000 (R2005) 		Metric grooved pins—half-length centre grooved
8 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type H
9 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type G
10 Grooved Pins - Type G [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type G
11 Grooved Pins - Type H [ASME]
ASME B 18.8.2 - 2000 (R2010) 		Grooved Pins - Type H
12 Grooved pins - Type F [ASME]
ASME B 18.8.2 - 2020 		Grooved pins - Type F
13 Grooved Straight Pins - Type C [SAE]
SAE J 494 (C) - 2004 		Grooved Straight Pins - Type C
14 Grooved Straight Pins - Type E [SAE]
SAE J 494 (E) - 2004 		Grooved Straight Pins - Type E
15 Grooved Straight Pins - Type F [SAE]
SAE J 494 (F) - 2004 		Grooved Straight Pins - Type F
16 Full-length Parallel Grooved, With Chamfer [EN]
EN 28740 - 1992 		Full-length Parallel Grooved, With Chamfer
17 Grooved Pins - Half-Length Centre Grooved [EN]
EN 28743 - 1992 		Grooved Pins - Half-Length Centre Grooved
18 Grooved Pins - Half-Length Centre Grooved [EN ISO]
EN ISO 8743 - 1997 		Grooved Pins - Half-Length Centre Grooved
19 Grooved Pins. Half Length Centre Grooved [NF]
NF E 25-750 - 1997 		Grooved Pins. Half Length Centre Grooved
20 Grooved Pins — Full-length Parallel Grooved, With Pilot [NF]
NF E 25-761 - 1997 		Grooved Pins — Full-length Parallel Grooved, With Pilot
21 Grooved Pins. One-Third-Length Centre Grooved [NF]
NF E 25-763 - 1997 (R2002) 		Grooved Pins. One-Third-Length Centre Grooved
22 Grooved Pins. Full Length Paralled Grooved, With Chamfer [NF]
NF E 25-772 - 1997 (R2002) 		Grooved Pins. Full Length Paralled Grooved, With Chamfer
23 Grooved Pins-Half-Length Centre Grooved [ISO]
ISO 8743 - 1997 		Grooved Pins-Half-Length Centre Grooved
24 Grooved Pin, Full Length Parallel Grooved With Chamfer [GB]
GB /T 13829.2 - 2004 		Grooved Pin, Full Length Parallel Grooved With Chamfer
25 Grooved pins-One-third-length centre grooved [GB]
GB /T 13829.3 - 2004 		Grooved pins-One-third-length centre grooved
26 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.4 - 2004 		Grooved Pins - Half-Length Centre Grooved
27 Grooved pin, full length parallel grooved with pilot [GB]
GB /T 13829.1 (A) - 1992 		Grooved pin, full length parallel grooved with pilot
28 Grooved Pins-Full-Length Parallel Grooved, With Chamferw [GB]
GB /T 13829.1 (B) - 1992 		Grooved Pins-Full-Length Parallel Grooved, With Chamferw
29 Grooved Pins-One-Third-Length Centre Grooved [GB]
GB /T 13829.1 (C) - 1992 		Grooved Pins-One-Third-Length Centre Grooved
30 Grooved Pins - Half-Length Centre Grooved [GB]
GB /T 13829.1 (D) - 1992 		Grooved Pins - Half-Length Centre Grooved
31 Grooved Pins-Full-Length Parallel Grooved, With Pilot [ISO]
ISO 8739 - 1997 		Grooved Pins-Full-Length Parallel Grooved, With Pilot
32 Grooved Pins-Full-Length Parallel Grooved, With Chamfer [ISO]
ISO 8740 - 1997 		Grooved Pins-Full-Length Parallel Grooved, With Chamfer
33 Grooved Pins-One-Third-Length Centre Grooved [ISO]
ISO 8742 - 1997 		Grooved Pins-One-Third-Length Centre Grooved
34 Grooved Pin, Full Length Parallel Grooved With Pilot [GB]
GB /T 13829.1 - 2004 		Grooved Pin, Full Length Parallel Grooved With Pilot
35 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 2012 		Grooved Pins, Half Length Grooved With Gorge
36 Grooved pins, Half length grooved with gorge [DIN]
DIN 1469 - 2011 		Grooved pins, Half length grooved with gorge
37 Grooved Pins, Half Length Grooved With Gorge [DIN]
DIN 1469 - 1978 		Grooved Pins, Half Length Grooved With Gorge
38 Grooved pin, full length parallel grooved with pilot [DIN]
DIN 1470 - 1978 		Grooved pin, full length parallel grooved with pilot
39 Grooved Pins, Full Length Parallel Grooved With Chamfer [DIN]
DIN 1473 - 1978 		Grooved Pins, Full Length Parallel Grooved With Chamfer
40 Grooved pins - 1/3 Length Centre Grooved [DIN]
DIN 1475 - 1978 		Grooved pins - 1/3 Length Centre Grooved
41 Grooved Pin, Full Length Parallel Grooved With Pilot [DIN EN ISO]
DIN EN ISO 8739 - 1998 		Grooved Pin, Full Length Parallel Grooved With Pilot
42 Grooved Pins. Full-Length Parallel Grooved,With Chamfer [DIN EN ISO]
DIN EN ISO 8740 - 1998 		Grooved Pins. Full-Length Parallel Grooved,With Chamfer
43 Grooved Pins - 1/3 Length Centre Grooved [DIN EN ISO]
DIN EN ISO 8742 - 1998 		Grooved Pins - 1/3 Length Centre Grooved