Click Specification

(Non-preferred) dimensions in parentheses.

Grooved Pins - Type G

ASME B 18.8.2 - 2020

Display drawing:

Nominal Diameter

(1/32)

(3/64)

1/16

(5/64)

3/32

(7/64)

1/8

5/32

3/16

7/32

1/4

5/16

3/8

7/16

1/2

Nominal Size
d	max
	min
b	Ref.
c	Nominal Size
a	max
	min
h	max
	min
Minimum Double-Shear Load, lb, (Low Carbon Steel)
Minimum Double-Shear Load, lb, (Alloy Steel, HRC40~48)
Minimum Double-Shear Load, lb, (Corrosion Resistant Steel)
Minimum Double-Shear Load, lb, (Brass)

0.0312	0.0469	0.0625	0.0781	0.0938	0.1094	0.1250	0.1563	0.1875	0.2188	0.2500	0.3125	0.3750	0.4375	0.5000
0.0312	0.0469	0.0625	0.0781	0.0938	0.1094	0.1250	0.1563	0.1875	0.2188	0.2500	0.3125	0.3750	0.4375	0.5000
0.0297	0.0454	0.0610	0.0766	0.0923	0.1074	0.1230	0.1543	0.1855	0.2168	0.2480	0.3105	0.3730	0.4355	0.4980
0.015	0.031	0.031	0.031	0.031	0.031	0.031	0.062	0.062	0.062	0.062	0.094	0.094	0.094	0.094
-	-	0.0065	0.0087	0.0091	0.0110	0.0130	0.0170	0.0180	0.0220	0.0260	0.0340	0.0390	0.0470	0.0520
-	-	-	-	0.038	0.038	0.069	0.069	0.069	0.101	0.101	0.132	0.132	0.195	0.195
-	-	-	-	0.028	0.028	0.059	0.059	0.059	0.091	0.091	0.122	0.122	0.185	0.185
-	-	-	-	0.041	0.041	0.041	0.057	0.057	0.072	0.072	0.104	0.135	0.135	0.135
-	-	-	-	0.031	0.031	0.031	0.047	0.047	0.062	0.062	0.094	0.125	0.125	0.125
100	220	410	620	890	1220	1600	2300	3310	4510	5880	7660	11000	15000	19600
180	400	720	1120	1600	2180	2820	4520	6440	8770	11500	17900	26000	35200	46000
140	300	540	860	1240	1680	2200	3310	4760	6480	8460	12700	18200	24800	32400
60	140	250	390	560	760	990	1540	2220	3020	3950	6170	9050	12100	15800

①,Material
1)low carbon or alloy steel
2)corrosion resistant stee , monel, brass, and other nonferrous metals

Alternative history

ASME B 18.8.2 - 2000(R2010) ASME B 18.8.2 - 2020

Send Inquiry

Similar Standards

1	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Grooved pins metric series with half-length grooved
2	[DIN EN ISO] DIN EN ISO 8739 - 1998	Grooved Pin, Full Length Parallel Grooved With Pilot
3	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Metric grooved pins, full-length parallel grooved-metric series
4	[ISO] ISO 8743 - 1997	Grooved Pins-Half-Length Centre Grooved
5	[ISO] ISO 8742 - 1997	Grooved Pins-One-Third-Length Centre Grooved
6	[DIN] DIN 1469 - 1978	Grooved Pins, Half Length Grooved With Gorge
7	[ISO] ISO 8740 - 1997	Grooved Pins-Full-Length Parallel Grooved, With Chamfer
8	[ASME] ASME B 18.8.2 - 2020	Grooved pins - Type F
9	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Metric grooved pins with one third length groove in the middle
10	[DIN] DIN 1469 - 2011	Grooved pins, Half length grooved with gorge
11	[DIN EN ISO] DIN EN ISO 8740 - 1998	Grooved Pins. Full-Length Parallel Grooved,With Chamfer
12	[ASME/ANSI] ASME/ANSI B 18.8.100M - 2000 (R2005)	Metric grooved pins—half-length centre grooved
13	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved pins - Type F
14	[EN ISO] EN ISO 8743 - 1997	Grooved Pins - Half-Length Centre Grooved
15	[DIN] DIN 1475 - 1978	Grooved pins - 1/3 Length Centre Grooved
16	[ISO] ISO 8739 - 1997	Grooved Pins-Full-Length Parallel Grooved, With Pilot
17	[ASME] ASME B 18.8.2 - 2020	Grooved Pins - Type H
18	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved Pins - Type G
19	[EN] EN 28740 - 1992	Full-length Parallel Grooved, With Chamfer
20	[DIN] DIN 1469 - 2012	Grooved Pins, Half Length Grooved With Gorge
21	[DIN] DIN 1473 - 1978	Grooved Pins, Full Length Parallel Grooved With Chamfer
22	[DIN EN ISO] DIN EN ISO 8742 - 1998	Grooved Pins - 1/3 Length Centre Grooved
23	[DIN EN ISO] DIN EN ISO 8743 - 1998	Grooved Pins -- Half-Length Centre Grooved
24	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved Pins - Type H
25	[ASME] ASME B 18.8.2 - 2000 (R2010)	Grooved Pins - Type E
26	[ASME] ASME B 18.8.2 - 2020	Grooved Pins - Type E
27	[EN] EN 28743 - 1992	Grooved Pins - Half-Length Centre Grooved
28	[DIN] DIN 1470 - 1978	Grooved pin, full length parallel grooved with pilot
29	[GB] GB /T 13829.2 - 2004	Grooved Pin, Full Length Parallel Grooved With Chamfer
30	[GB] GB /T 13829.1 (A) - 1992	Grooved pin, full length parallel grooved with pilot
31	[GB] GB /T 13829.1 (B) - 1992	Grooved Pins-Full-Length Parallel Grooved, With Chamferw
32	[NF] NF E 25-761 - 1997	Grooved Pins — Full-length Parallel Grooved, With Pilot
33	[GB] GB /T 13829.1 (D) - 1992	Grooved Pins - Half-Length Centre Grooved
34	[GB] GB /T 13829.1 - 2004	Grooved Pin, Full Length Parallel Grooved With Pilot
35	[NF] NF E 25-772 - 1997 (R2002)	Grooved Pins. Full Length Paralled Grooved, With Chamfer
36	[NF] NF E 25-763 - 1997 (R2002)	Grooved Pins. One-Third-Length Centre Grooved
37	[GB] GB /T 13829.1 (C) - 1992	Grooved Pins-One-Third-Length Centre Grooved
38	[NF] NF E 25-750 - 1997	Grooved Pins. Half Length Centre Grooved
39	[GB] GB /T 13829.4 - 2004	Grooved Pins - Half-Length Centre Grooved
40	[GB] GB /T 13829.3 - 2004	Grooved pins-One-third-length centre grooved
41	[SAE] SAE J 494 (C) - 2004	Grooved Straight Pins - Type C
42	[SAE] SAE J 494 (E) - 2004	Grooved Straight Pins - Type E
43	[SAE] SAE J 494 (F) - 2004	Grooved Straight Pins - Type F