About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:inch

Grooved Pins - Type A

ASME B 18.8.2 - 2000 (R2010)

Display drawing:

美标ASME B18.8.2 - 2000 (R2010) ASME18.8.2 Grooved Pins - Type A
Nominal Diameter
1/32 3/64 1/16 5/64 3/32 7/64 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2
Nominal Size
d max
min
c Nominal Size
R max
min
0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.1563 0.1875 0.2188 0.2500 0.3125 0.3750 0.4375 0.5000
0.0312 0.0469 0.0625 0.0781 0.0938 0.1094 0.1250 0.1563 0.1875 0.2188 0.2500 0.3125 0.3750 0.4375 0.5000
0.0297 0.0454 0.0610 0.0766 0.0923 0.1074 0.1230 0.1543 0.1855 0.2168 0.2480 0.3105 0.3730 0.4355 0.4980
- - 0.0065 0.0087 0.0091 0.0110 0.0130 0.0170 0.0180 0.0220 0.0260 0.0340 0.0390 0.0470 0.0520
- - 0.088 0.104 0.135 0.150 0.166 0.198 0.260 0.291 0.322 0.385 0.479 0.541 0.635
- - 0.068 0.084 0.115 0.130 0.146 0.178 0.240 0.271 0.302 0.365 0.459 0.521 0.615

Alternative history

ASME B 18.8.2 - 2000(R2010) ASME B 18.8.2 - 2020
Send Inquiry

Similar Standards

1 Grooved Pins-Half-Length Reverse-Taper Grooved [DIN]
DIN 1474 - 1978 		Grooved Pins-Half-Length Reverse-Taper Grooved
2 Grooved Pins - Type A [ASME]
ASME B 18.8.2 - 2020 		Grooved Pins - Type A
3 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Rounded Ends [ISO]
ISO 8741 (RN) - 2025 		Reverse-taper Grooved Pins - Half-length Progressive Grooves - Rounded Ends
4 Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T6) - 2000 (R2005) 		Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6]
5 Grooved Pins - Half-length Reverse-taper Grooved [EN]
EN 28741 - 1992 		Grooved Pins - Half-length Reverse-taper Grooved
6 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Chamfered Ends (CH) [ISO]
ISO 8744 (CH) - 2025 		Taper Grooved Pins - Full-length Progressive Grooves - Pin with Chamfered Ends (CH)
7 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Chamfered Ends [ISO]
ISO 8741 (CH) - 2025 		Reverse-taper Grooved Pins - Half-length Progressive Grooves - Chamfered Ends
8 Grooved Pins - Half-length Reverse-Taper Grooved [DIN EN ISO]
DIN EN ISO 8741 - 1998 		Grooved Pins - Half-length Reverse-Taper Grooved
9 Groovd Pins - Full-Length Taper Grooved [DIN EN ISO]
DIN EN ISO 8744 - 1998 		Groovd Pins - Full-Length Taper Grooved
10 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Rounded Ends [ISO]
ISO 13670 (RN) - 2025 		Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Rounded Ends
11 Grooved Pins - Half-length Reverse-taper Grooved [EN ISO]
EN ISO 8741 - 1997 		Grooved Pins - Half-length Reverse-taper Grooved
12 Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7] [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M T7) - 2000 (R2005) 		Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7]
13 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Rounded Ends (RN) [ISO]
ISO 8744 (RN) - 2025 		Taper Grooved Pins - Full-length Progressive Grooves - Pin with Rounded Ends (RN)
14 Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41 [ASME/ANSI]
ASME/ANSI B 18.8.100M (B18.8.9M A) - 2000 (R2005) 		Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41
15 Grooved Pins-Half-Length Taper Grooved [ISO]
ISO 8745 - 1997 		Grooved Pins-Half-Length Taper Grooved
16 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Chamfered Ends (CH) [ISO]
ISO 8745 (CH) - 2025 		Taper Grooved Pins - Half-length Progressive Grooves - Pin with Chamfered Ends (CH)
17 Grooved Pins, Half Length Taper Grooved [DIN]
DIN 1472 - 1978 		Grooved Pins, Half Length Taper Grooved
18 Grooved Pins, Half-Length Taper Grooved [DIN EN ISO]
DIN EN ISO 8745 - 1998 		Grooved Pins, Half-Length Taper Grooved
19 Grooved Pins - Half-length Reverse Taper Grooved [ISO]
ISO 8741 - 1997 		Grooved Pins - Half-length Reverse Taper Grooved
20 Grooved Pins, Full Length Taper Grooved [DIN]
DIN 1471 - 1978 		Grooved Pins, Full Length Taper Grooved
21 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Chamfered Ends [ISO]
ISO 13670 (CH) - 2025 		Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Chamfered Ends
22 Groovd Pins-Full-Length Taper Grooved [ISO]
ISO 8744 - 1997 		Groovd Pins-Full-Length Taper Grooved
23 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Rounded Ends (RN) [ISO]
ISO 8745 (RN) - 2025 		Taper Grooved Pins - Half-length Progressive Grooves - Pin with Rounded Ends (RN)
24 Grooved Pins-half-length Reverse-taper Grooved [GB]
GB /T 13829.2 (C) - 1992 		Grooved Pins-half-length Reverse-taper Grooved
25 Grooved Pins - Half-Length Taper Grooved [NF]
NF E 25-765 - 1997 		Grooved Pins - Half-Length Taper Grooved
26 Grooved Pins-Full-Length Taper Grooved [NF]
NF E 25-764 - 1997 (R2002) 		Grooved Pins-Full-Length Taper Grooved
27 Grooved Pins-taper Grooved, A-style [GB]
GB /T 13829.2 (A) - 1992 		Grooved Pins-taper Grooved, A-style
28 Grooved Pins - Half-Length Taper Grooved [GB]
GB /T 13829.6 - 2004 		Grooved Pins - Half-Length Taper Grooved
29 Grooved Pins-half-length Taper Grooved [GB]
GB /T 13829.2 (B) - 1992 		Grooved Pins-half-length Taper Grooved
30 Groovd Pins-Full-Length Taper Grooved [GB]
GB /T 13829.5 - 2004 		Groovd Pins-Full-Length Taper Grooved
31 Grooved Pins-Half-Length Reverse-Taper Grooved [GB]
GB /T 13829.7 - 2004 		Grooved Pins-Half-Length Reverse-Taper Grooved
32 Grooved Pins. Half-Length Reverse-Taper Grooved [NF]
NF E 25-762 - 1997 		Grooved Pins. Half-Length Reverse-Taper Grooved
33 Grooved Straight Pins - Type B [SAE]
SAE J 494 (B) - 2004 		Grooved Straight Pins - Type B
34 Grooved Straight Pins - Type D [SAE]
SAE J 494 (D) - 2004 		Grooved Straight Pins - Type D
35 Grooved Straight Pins - Type A [SAE]
SAE J 494 (A) - 2004 		Grooved Straight Pins - Type A
36 Grooved Pins - Half-length Reverse Taper Grooved [IS]
IS 7386 - 2005 		Grooved Pins - Half-length Reverse Taper Grooved