About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Forged Steel Lifting Hooks with Latch, Grade 8

GB 24813 - 2018

Display drawing:

国标GB 24813 - 2018 GB24813 24813GB Forged Steel Lifting Hooks with Latch, Grade 8
国标GB 24813 - 2018 GB24813 24813GB Forged Steel Lifting Hooks with Latch, Grade 8
Part No.
3 4 5 6 7 8 9 10 11 13 14 16
working load limit(WLL) (t)
D min
D0 min
D1 min
F min
H max
L max
0.25 0.5 0.8 1.12 1.5 2 2.5 3.15 3.75 5.3 6 8
11 15 19 22 26 30 34 38 42 49 52 60
8 11 14 17 20 23 26 29 32 37 40 46
8 11 14 16 18 21 24 27 30 35 37 43
6 8 10 12 14 16 18 20 23 26 28 32
12 17 21 25 29 34 38 43 48 55 59 68
8 11 14 17 20 23 26 29 32 37 40 46
Part No.
18 19 20 22 23 25 26 28 32 36 40 45
working load limit(WLL) (t)
D min
D0 min
D1 min
F min
H max
L max
10 11.2 12.5 15 16 20 21.2 25 31.5 40 50 63
67 71 75 82 85 95 98 106 119 134 150 168
51 54 57 63 65 72 75 81 91 102 115 129
48 51 53 58 60 68 70 76 85 96 107 120
36 38 40 44 46 51 52 57 64 72 81 90
76 80 85 93 96 107 111 120 135 152 170 190
51 54 57 63 65 72 75 81 91 102 115 129
①,To meet the articulation and relative movement requirement when directly connected in wire rope slings and textile slings, dimension F will need to be larger than the minimum value given.
②,The actual point height, B, shall be equal to or greater than the full throat opening D0.
③,The full throat opening, D0, shall not exceed 95 % of the actual seat diameter D.
④,The hook latch shall be capable of closing over the maximum diameter of bar, that can be admitted through the actual throat opening D1.
Send Inquiry

Similar Standards

1 Tested, Non-calibrated, Long-link Round Steel Chains [DIN]
DIN 763 - 1990 		Tested, Non-calibrated, Long-link Round Steel Chains
2 Overhead Lines Curved Insulator Supports - Standard Design - SBD [DIN]
DIN 48051-1 - 1959 		Overhead Lines Curved Insulator Supports - Standard Design - SBD
3 Wire Rope Clamps for Cable End Connections [DIN]
DIN 741 - 1972 		Wire Rope Clamps for Cable End Connections
4 Turnbuckles - Form E [DIN]
DIN 82004 - 1972 		Turnbuckles - Form E
5 Components for Liftig, Towing, lashing—Shackle, Bow-Stainless Steels [DIN]
DIN 82103 - 1987 		Components for Liftig, Towing, lashing—Shackle, Bow-Stainless Steels
6 Clamp Nut [DIN]
DIN 82004 - 1972 		Clamp Nut
7 Forged Steel Shackles for General Lifting Purposes - Bow Shackles [EN]
EN 13889 (Bow) - 2008 		Forged Steel Shackles for General Lifting Purposes - Bow Shackles
8 Turnbuckles [DIN]
DIN 1480 - 1975 		Turnbuckles
9 Snap Hook Round Wire and Forged - Form C [DIN]
DIN 5299 (C) - 1980 		Snap Hook Round Wire and Forged - Form C
10 U-Bolt Wire Rope Grips [EN]
EN 13411-5 (A1) - 2003 		U-Bolt Wire Rope Grips
11 Turnbuckles - Form C [DIN]
DIN 82004 - 1972 		Turnbuckles - Form C
12 Components for Liftig, Towing, Lashing - Shackle, Bow-stainless Steels [DIN]
DIN 82103 - 2005 		Components for Liftig, Towing, Lashing - Shackle, Bow-stainless Steels
13 Turnbuckles - Form B [DIN]
DIN 82004 - 1972 		Turnbuckles - Form B
14 U-bolt Wire Rope Grips - Collar Nut [EN]
EN 13411-5 (A4) - 2003 		U-bolt Wire Rope Grips - Collar Nut
15 Steel Thimbles for Fibre Ropes [DIN]
DIN 6899 - 1988 		Steel Thimbles for Fibre Ropes
16 Snap Hook Round Wire and Forged - Form B [DIN]
DIN 5299 (B) - 1980 		Snap Hook Round Wire and Forged - Form B
17 Turnbuckles - Form D [DIN]
DIN 82004 - 1972 		Turnbuckles - Form D
18 Wire Rope Grips for Rope Terminations; To Meet Safety Requirements [DIN]
DIN 1142 - 1982 		Wire Rope Grips for Rope Terminations; To Meet Safety Requirements
19 Turnbuckles Made from Steel Tube or Round Steel Bar [DIN]
DIN 1478 - 1975 		Turnbuckles Made from Steel Tube or Round Steel Bar
20 Forged Steel Shackles for General Lifting Purposes - Dee Shackles [EN]
EN 13889 (Dee) - 2008 		Forged Steel Shackles for General Lifting Purposes - Dee Shackles
21 U-bolt Wire Rope Grips - Bridge [EN]
EN 13411-5 (A2) - 2003 		U-bolt Wire Rope Grips - Bridge
22 Components for Liftig, Towing, Lashing—Shackle, Dee-Non-Alloy Quality Steels [DIN]
DIN 82101 - 2005 		Components for Liftig, Towing, Lashing—Shackle, Dee-Non-Alloy Quality Steels
23 Snap Hook Half-round Wire - Form A [DIN]
DIN 5299 (A) - 1980 		Snap Hook Half-round Wire - Form A
24 Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8 [EN]
EN 1677-2 - 2000 (+A1:2008) 		Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8
25 Forged Shackles for General Lifting Purposes - Bow Shackle [ISO]
ISO 2415 (Bow) - 2022 		Forged Shackles for General Lifting Purposes - Bow Shackle
26 Turnbuckles Made from Steel Tubes or Round Steel Bars [DIN]
DIN 1478 - 2005 		Turnbuckles Made from Steel Tubes or Round Steel Bars
27 Forged Steel Self-locking Hooks - Grade 8 [EN]
EN 1677-3 - 2001 (+A1:2008) 		Forged Steel Self-locking Hooks - Grade 8
28 Overhead Lines Curved Insulator Supports - Standard Design - SBM [DIN]
DIN 48051-1 (SBM) - 1959 		Overhead Lines Curved Insulator Supports - Standard Design - SBM
29 Snap Hook Round Wire and Forged - Form D [DIN]
DIN 5299 (D) - 1980 		Snap Hook Round Wire and Forged - Form D
30 Forged Steel Lifting Hooks with Latch, Grade 4 [EN]
EN 1677-5 - 2001 (+A1:2008) 		Forged Steel Lifting Hooks with Latch, Grade 4
31 Forged Steel Lifting Hooks with Latch, Grade 8 [ISO]
ISO 7597 - 2013 		Forged Steel Lifting Hooks with Latch, Grade 8
32 Components for Liftig, Towing, Lashing - Shackle, Dee-non-alloy Quality Steels [DIN]
DIN 82101 - 1976 		Components for Liftig, Towing, Lashing - Shackle, Dee-non-alloy Quality Steels
33 Snap Hook Round Wire and Forged - Form E [DIN]
DIN 5299 (E) - 1980 		Snap Hook Round Wire and Forged - Form E
34 Turnbuckles - Form A [DIN]
DIN 82004 - 1972 		Turnbuckles - Form A
35 Forged Turnbuckles, (Open Type) [DIN]
DIN 1480 - 2005 		Forged Turnbuckles, (Open Type)
36 Forged Shackles for General Lifting Purposes - Dee Shackles [ISO]
ISO 2415 (Dee) - 2022 		Forged Shackles for General Lifting Purposes - Dee Shackles
37 U Shape Bolts (Type FR) [JIS]
JIS B 2809 (FR) - 1977 		U Shape Bolts (Type FR)
38 Shackles for Ship - Circular [GB]
GB 559 (O1-O4) - 1987 		Shackles for Ship - Circular
39 Bolt-Type Pin with Hexagon Head - For Circular Shackle [GB]
GB 559 (O3) - 1987 		Bolt-Type Pin with Hexagon Head - For Circular Shackle
40 Hexagon Nuts [GB]
GB 559 (Nuts) - 1987 		Hexagon Nuts
41 Forged Shackles for General Lifting Purposes - Dee Shackles [GB]
GB /T 10603 (Dee) - 1989 		Forged Shackles for General Lifting Purposes - Dee Shackles
42 Screwed Pin with Eye and Collar - For Large-size Circular Shackle [GB]
GB 559 (OE1) - 1987 		Screwed Pin with Eye and Collar - For Large-size Circular Shackle
43 General Purpose Thimbles for use with Steel Wire Ropes [GB]
GB /T 5974.1 - 2006 		General Purpose Thimbles for use with Steel Wire Ropes
44 Steel Wire Ropes for iImportant Purposes [GB]
GB /T 8918 - 2006 		Steel Wire Ropes for iImportant Purposes
45 Stainless Steel Thread Strap Bolt [JIS]
JIS A 5540 - 2008 		Stainless Steel Thread Strap Bolt
46 Shackles for ship - Straight [GB]
GB 559 (D1-D4) - 1987 		Shackles for ship - Straight
47 Shackle Body - Form SD [JIS]
JIS B 2801 - 1996 		Shackle Body - Form SD
48 Shackle Body - Form BD [JIS]
JIS B 2801 - 1996 		Shackle Body - Form BD
49 Forged Shackles for General Lifting Purposes - Dee Shackles [GB]
GB /T 25854 (Dee) - 2010 		Forged Shackles for General Lifting Purposes - Dee Shackles
50 Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt [JIS]
JIS A 5542 (4) - 2003 		Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
51 Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products] [JIS]
JIS A 5542 (1A) - 2003 		Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
52 U Shape Bolts (Type MS) [JIS]
JIS B 2809 (MS) - 2018 		U Shape Bolts (Type MS)
53 Anchor Shackle [GB]
GB /T 547 (A) - 1994 		Anchor Shackle
54 Lifting Hooks - Shank Hooks with Point - Type LMD and LYD [GB]
GB /T 10051.5 - 2010 		Lifting Hooks - Shank Hooks with Point - Type LMD and LYD
55 Turnbuckle Building, Thread Strap Bolt, Carbon Steel and Hot-dip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Turnbuckle Building, Thread Strap Bolt, Carbon Steel and Hot-dip Zinc Coated Carbon Steel
56 U Shape Bolts (Type MR) [JIS]
JIS B 2809 (MR) - 1977 		U Shape Bolts (Type MR)
57 Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products [JIS]
JIS A 5541 - 2008 		Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products
58 U Shape Bolts (Type F) [JIS]
JIS B 2809 (F) - 2018 		U Shape Bolts (Type F)
59 Bow Shackle Body - Form BA, BB and BC [JIS]
JIS B 2801 - 1996 		Bow Shackle Body - Form BA, BB and BC
60 Anchor Shackle-U-shaped [GB]
GB /T 547 (B) - 1994 		Anchor Shackle-U-shaped
61 Shackles for Ship - Circular - Large [GB]
GB 559 (OE1-OE4) - 1987 		Shackles for Ship - Circular - Large
62 Lifting Hooks - Shank Hooks with Point - Type LMD and LYD [GB]
GB 10051.5 - 1988 		Lifting Hooks - Shank Hooks with Point - Type LMD and LYD
63 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt [JIS]
JIS A 5542 (A2B) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
64 Parallel Pins - For Straight Shackle [GB]
GB 559 (D4) - 1987 		Parallel Pins - For Straight Shackle
65 Parallel Pins - For Large-size Circular Shackle [GB]
GB 559 (OE4) - 1987 		Parallel Pins - For Large-size Circular Shackle
66 Straight Shackle [GB]
GB 559 (D) - 1987 		Straight Shackle
67 Bolt-Type Pin with Hexagon Head - For Large-size Circular Shackle [GB]
GB 559 (OE3) - 1987 		Bolt-Type Pin with Hexagon Head - For Large-size Circular Shackle
68 Screwed Pin with Eye and Collar - For Circular Shackle [GB]
GB 559 (O1) - 1987 		Screwed Pin with Eye and Collar - For Circular Shackle
69 Screwed Pin with Eye and Collar - For Straight Shackle [GB]
GB 559 (D1) - 1987 		Screwed Pin with Eye and Collar - For Straight Shackle
70 Bolt-Type Pin with Hexagon Head - For Straight Shackle [GB]
GB 559 (D3) - 1987 		Bolt-Type Pin with Hexagon Head - For Straight Shackle
71 Straight Shackle Body - Form SA, SB and SC [JIS]
JIS B 2801 - 1996 		Straight Shackle Body - Form SA, SB and SC
72 Slotted Countersunk Head Pins - For Large-size Circular Shackle [GB]
GB 559 (OE2) - 1987 		Slotted Countersunk Head Pins - For Large-size Circular Shackle
73 Lifting Hooks - Shank Hooks with Point - Type LM and LY [GB]
GB /T 10051.5 - 2010 		Lifting Hooks - Shank Hooks with Point - Type LM and LY
74 Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products] [JIS]
JIS A 5542 (1B) - 2003 		Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
75 Short Link Chain for Lifting Purposes - Grade 4, Non-calibrated, for Chain Slings Etc. [GB]
GB 24814 - 2009 		Short Link Chain for Lifting Purposes - Grade 4, Non-calibrated, for Chain Slings Etc.
76 Circular Shackle [GB]
GB 559 (O) - 1987 		Circular Shackle
77 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt [JIS]
JIS A 5542 (A1B) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
78 Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
79 Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
80 U Shape Bolts (Type MR) [JIS]
JIS B 2809 (MR) - 2018 		U Shape Bolts (Type MR)
81 Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products] [JIS]
JIS A 5542 (3) - 2003 		Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products]
82 Circular Shackle - Large [GB]
GB 559 (OE) - 1987 		Circular Shackle - Large
83 Body of Turnbuckle for Building - Stainless Steel Products [JIS]
JIS A 5541 - 2008 		Body of Turnbuckle for Building - Stainless Steel Products
84 Wire Rope Grips [GB]
GB /T 5976 - 2006 		Wire Rope Grips
85 Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
86 Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] [JIS]
JIS A 5542 (2A) - 2003 		Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
87 Parallel Pins - For Circular Shackle [GB]
GB 559 (O4) - 1987 		Parallel Pins - For Circular Shackle
88 Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] [JIS]
JIS A 5542 (2B) - 2003 		Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
89 Wire Clip for Wire Strand, Type FS [JIS]
JIS B 2809 (FS) - 1977 		Wire Clip for Wire Strand, Type FS
90 Slotted Countersunk Head Pins - For Circular Shackle [GB]
GB 559 (O2) - 1987 		Slotted Countersunk Head Pins - For Circular Shackle
91 Slotted Countersunk Head Pins - For Straight Shackle [GB]
GB 559 (D2) - 1987 		Slotted Countersunk Head Pins - For Straight Shackle
92 Longer Stainless Steel Thread Strap Bolt [JIS]
JIS A 5540 - 2008 		Longer Stainless Steel Thread Strap Bolt
93 Forged Shackles for General Lifting Purposes - Bow Shackle [GB]
GB /T 10603 (Bow) - 1989 		Forged Shackles for General Lifting Purposes - Bow Shackle
94 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt [JIS]
JIS A 5542 (A1A) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
95 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt [JIS]
JIS A 5542 (A2A) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
96 Forged Shackles for General Lifting Purposes - Bow Shackle [GB]
GB /T 25854 (Bow) - 2010 		Forged Shackles for General Lifting Purposes - Bow Shackle
97 Lifting Hooks - Shank Hooks with Point - Type LM and LY [GB]
GB 10051.5 - 1988 		Lifting Hooks - Shank Hooks with Point - Type LM and LY
98 U Shape Bolts (Type MS) [JIS]
JIS B 2809 (MS) - 1977 		U Shape Bolts (Type MS)
99 Shackle [YJT]
YJT 17002 		Shackle
100 National Standard B Wire Rope Clips [YJT]
YJT 17018 		National Standard B Wire Rope Clips