About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Forged Steel Lifting Hooks with Latch, Grade 8

ISO 7597 - 2013

Display drawing:

国际ISO 7597 - 2013 ISO7597 7597ISO Forged Steel Lifting Hooks with Latch, Grade 8
国际ISO 7597 - 2013 ISO7597 7597ISO Forged Steel Lifting Hooks with Latch, Grade 8
Part No.
3 4 5 6 7 8 9 10 11 13 14 16
working load limit(WLL) (t)
D min
D0 min
D1 min
F min
H max
L max
0.25 0.5 0.8 1.12 1.5 2 2.5 3.15 3.75 5.3 6 8
11 15 19 22 26 30 34 38 42 49 52 60
8 11 14 17 20 23 26 29 32 37 40 46
8 11 14 16 18 21 24 27 30 35 37 43
6 8 10 12 14 16 18 20 23 26 28 32
12 17 21 25 29 34 38 43 48 55 59 68
8 11 14 17 20 23 26 29 32 37 40 46
Part No.
18 19 20 22 23 25 26 28 32 36 40 45
working load limit(WLL) (t)
D min
D0 min
D1 min
F min
H max
L max
10 11.2 12.5 15 16 20 21.2 25 31.5 40 50 63
67 71 75 82 85 95 98 106 119 134 150 168
51 54 57 63 65 72 75 81 91 102 115 129
48 51 53 58 60 68 70 76 85 96 107 120
36 38 40 44 46 51 52 57 64 72 81 90
76 80 85 93 96 107 111 120 135 152 170 190
51 54 57 63 65 72 75 81 91 102 115 129
①,To meet the articulation and relative movement requirement when directly connected in wire rope slings and textile slings, dimension F will need to be larger than the minimum value given.
②,The actual point height, B, shall be equal to or greater than the full throat opening D0.
③,The full throat opening, D0, shall not exceed 95 % of the actual seat diameter D.
④,The hook latch shall be capable of closing over the maximum diameter of bar, that can be admitted through the actual throat opening D1.
Send Inquiry

Similar Standards

1 Forged Shackles for General Lifting Purposes - Dee Shackles [GB]
GB /T 25854 (Dee) - 2010 		Forged Shackles for General Lifting Purposes - Dee Shackles
2 Short Link Chain for Lifting Purposes - Grade 4, Non-calibrated, for Chain Slings Etc. [GB]
GB 24814 - 2009 		Short Link Chain for Lifting Purposes - Grade 4, Non-calibrated, for Chain Slings Etc.
3 General Purpose Thimbles for use with Steel Wire Ropes [GB]
GB /T 5974.1 - 2006 		General Purpose Thimbles for use with Steel Wire Ropes
4 Steel Wire Ropes for iImportant Purposes [GB]
GB /T 8918 - 2006 		Steel Wire Ropes for iImportant Purposes
5 Turnbuckles Made from Steel Tubes or Round Steel Bars [DIN]
DIN 1478 - 2005 		Turnbuckles Made from Steel Tubes or Round Steel Bars
6 Forged Turnbuckles, (Open Type) [DIN]
DIN 1480 - 2005 		Forged Turnbuckles, (Open Type)
7 Snap Hook Round Wire and Forged - Form D [DIN]
DIN 5299 (D) - 1980 		Snap Hook Round Wire and Forged - Form D
8 Snap Hook Round Wire and Forged - Form E [DIN]
DIN 5299 (E) - 1980 		Snap Hook Round Wire and Forged - Form E
9 Turnbuckles Made from Steel Tube or Round Steel Bar [DIN]
DIN 1478 - 1975 		Turnbuckles Made from Steel Tube or Round Steel Bar
10 Turnbuckles [DIN]
DIN 1480 - 1975 		Turnbuckles
11 U-Bolt Wire Rope Grips [EN]
EN 13411-5 (A1) - 2003 		U-Bolt Wire Rope Grips
12 U Shape Bolts (Type MS) [JIS]
JIS B 2809 (MS) - 2018 		U Shape Bolts (Type MS)
13 U Shape Bolts (Type MS) [JIS]
JIS B 2809 (MS) - 1977 		U Shape Bolts (Type MS)
14 Shackle [YJT]
YJT 17002 		Shackle
15 National Standard B Wire Rope Clips [YJT]
YJT 17018 		National Standard B Wire Rope Clips
16 DIN 1480 Turnbuckles [YJT]
YJT 17024 (DIN 1480) 		DIN 1480 Turnbuckles
17 Weld-on Pivot Link [YJT]
YJT 17028 		Weld-on Pivot Link
18 Connect Ring [YJT]
YJT 17031 		Connect Ring
19 Forged Steel Lifting Hooks with Latch, Grade 8 [GB]
GB 24813 - 2018 		Forged Steel Lifting Hooks with Latch, Grade 8
20 Lifting Hooks - Shank Hooks with Point - Type LM and LY [GB]
GB /T 10051.5 - 2010 		Lifting Hooks - Shank Hooks with Point - Type LM and LY
21 Lifting Hooks - Shank Hooks with Point - Type LMD and LYD [GB]
GB /T 10051.5 - 2010 		Lifting Hooks - Shank Hooks with Point - Type LMD and LYD
22 Forged Shackles for General Lifting Purposes - Bow Shackle [GB]
GB /T 25854 (Bow) - 2010 		Forged Shackles for General Lifting Purposes - Bow Shackle
23 Wire Rope Grips [GB]
GB /T 5976 - 2006 		Wire Rope Grips
24 Anchor Shackle [GB]
GB /T 547 (A) - 1994 		Anchor Shackle
25 Anchor Shackle-U-shaped [GB]
GB /T 547 (B) - 1994 		Anchor Shackle-U-shaped
26 Forged Shackles for General Lifting Purposes - Dee Shackles [GB]
GB /T 10603 (Dee) - 1989 		Forged Shackles for General Lifting Purposes - Dee Shackles
27 Forged Shackles for General Lifting Purposes - Bow Shackle [GB]
GB /T 10603 (Bow) - 1989 		Forged Shackles for General Lifting Purposes - Bow Shackle
28 Lifting Hooks - Shank Hooks with Point - Type LM and LY [GB]
GB 10051.5 - 1988 		Lifting Hooks - Shank Hooks with Point - Type LM and LY
29 Lifting Hooks - Shank Hooks with Point - Type LMD and LYD [GB]
GB 10051.5 - 1988 		Lifting Hooks - Shank Hooks with Point - Type LMD and LYD
30 Shackles for ship - Straight [GB]
GB 559 (D1-D4) - 1987 		Shackles for ship - Straight
31 Straight Shackle [GB]
GB 559 (D) - 1987 		Straight Shackle
32 Shackles for Ship - Circular [GB]
GB 559 (O1-O4) - 1987 		Shackles for Ship - Circular
33 Circular Shackle [GB]
GB 559 (O) - 1987 		Circular Shackle
34 Shackles for Ship - Circular - Large [GB]
GB 559 (OE1-OE4) - 1987 		Shackles for Ship - Circular - Large
35 Circular Shackle - Large [GB]
GB 559 (OE) - 1987 		Circular Shackle - Large
36 Screwed Pin with Eye and Collar - For Straight Shackle [GB]
GB 559 (D1) - 1987 		Screwed Pin with Eye and Collar - For Straight Shackle
37 Screwed Pin with Eye and Collar - For Circular Shackle [GB]
GB 559 (O1) - 1987 		Screwed Pin with Eye and Collar - For Circular Shackle
38 Screwed Pin with Eye and Collar - For Large-size Circular Shackle [GB]
GB 559 (OE1) - 1987 		Screwed Pin with Eye and Collar - For Large-size Circular Shackle
39 Slotted Countersunk Head Pins - For Straight Shackle [GB]
GB 559 (D2) - 1987 		Slotted Countersunk Head Pins - For Straight Shackle
40 Slotted Countersunk Head Pins - For Circular Shackle [GB]
GB 559 (O2) - 1987 		Slotted Countersunk Head Pins - For Circular Shackle
41 Slotted Countersunk Head Pins - For Large-size Circular Shackle [GB]
GB 559 (OE2) - 1987 		Slotted Countersunk Head Pins - For Large-size Circular Shackle
42 Bolt-Type Pin with Hexagon Head - For Straight Shackle [GB]
GB 559 (D3) - 1987 		Bolt-Type Pin with Hexagon Head - For Straight Shackle
43 Bolt-Type Pin with Hexagon Head - For Circular Shackle [GB]
GB 559 (O3) - 1987 		Bolt-Type Pin with Hexagon Head - For Circular Shackle
44 Bolt-Type Pin with Hexagon Head - For Large-size Circular Shackle [GB]
GB 559 (OE3) - 1987 		Bolt-Type Pin with Hexagon Head - For Large-size Circular Shackle
45 Parallel Pins - For Straight Shackle [GB]
GB 559 (D4) - 1987 		Parallel Pins - For Straight Shackle
46 Parallel Pins - For Circular Shackle [GB]
GB 559 (O4) - 1987 		Parallel Pins - For Circular Shackle
47 Parallel Pins - For Large-size Circular Shackle [GB]
GB 559 (OE4) - 1987 		Parallel Pins - For Large-size Circular Shackle
48 Hexagon Nuts [GB]
GB 559 (Nuts) - 1987 		Hexagon Nuts
49 Forged Shackles for General Lifting Purposes - Dee Shackles [ISO]
ISO 2415 (Dee) - 2022 		Forged Shackles for General Lifting Purposes - Dee Shackles
50 Forged Shackles for General Lifting Purposes - Bow Shackle [ISO]
ISO 2415 (Bow) - 2022 		Forged Shackles for General Lifting Purposes - Bow Shackle
51 Components for Liftig, Towing, Lashing—Shackle, Dee-Non-Alloy Quality Steels [DIN]
DIN 82101 - 2005 		Components for Liftig, Towing, Lashing—Shackle, Dee-Non-Alloy Quality Steels
52 Components for Liftig, Towing, Lashing - Shackle, Bow-stainless Steels [DIN]
DIN 82103 - 2005 		Components for Liftig, Towing, Lashing - Shackle, Bow-stainless Steels
53 Tested, Non-calibrated, Long-link Round Steel Chains [DIN]
DIN 763 - 1990 		Tested, Non-calibrated, Long-link Round Steel Chains
54 Steel Thimbles for Fibre Ropes [DIN]
DIN 6899 - 1988 		Steel Thimbles for Fibre Ropes
55 Components for Liftig, Towing, lashing—Shackle, Bow-Stainless Steels [DIN]
DIN 82103 - 1987 		Components for Liftig, Towing, lashing—Shackle, Bow-Stainless Steels
56 Wire Rope Grips for Rope Terminations; To Meet Safety Requirements [DIN]
DIN 1142 - 1982 		Wire Rope Grips for Rope Terminations; To Meet Safety Requirements
57 Snap Hook Half-round Wire - Form A [DIN]
DIN 5299 (A) - 1980 		Snap Hook Half-round Wire - Form A
58 Snap Hook Round Wire and Forged - Form B [DIN]
DIN 5299 (B) - 1980 		Snap Hook Round Wire and Forged - Form B
59 Snap Hook Round Wire and Forged - Form C [DIN]
DIN 5299 (C) - 1980 		Snap Hook Round Wire and Forged - Form C
60 Components for Liftig, Towing, Lashing - Shackle, Dee-non-alloy Quality Steels [DIN]
DIN 82101 - 1976 		Components for Liftig, Towing, Lashing - Shackle, Dee-non-alloy Quality Steels
61 Wire Rope Clamps for Cable End Connections [DIN]
DIN 741 - 1972 		Wire Rope Clamps for Cable End Connections
62 Turnbuckles - Form A [DIN]
DIN 82004 - 1972 		Turnbuckles - Form A
63 Turnbuckles - Form B [DIN]
DIN 82004 - 1972 		Turnbuckles - Form B
64 Turnbuckles - Form C [DIN]
DIN 82004 - 1972 		Turnbuckles - Form C
65 Turnbuckles - Form D [DIN]
DIN 82004 - 1972 		Turnbuckles - Form D
66 Turnbuckles - Form E [DIN]
DIN 82004 - 1972 		Turnbuckles - Form E
67 Clamp Nut [DIN]
DIN 82004 - 1972 		Clamp Nut
68 Overhead Lines Curved Insulator Supports - Standard Design - SBM [DIN]
DIN 48051-1 (SBM) - 1959 		Overhead Lines Curved Insulator Supports - Standard Design - SBM
69 Overhead Lines Curved Insulator Supports - Standard Design - SBD [DIN]
DIN 48051-1 - 1959 		Overhead Lines Curved Insulator Supports - Standard Design - SBD
70 Forged Steel Shackles for General Lifting Purposes - Dee Shackles [EN]
EN 13889 (Dee) - 2008 		Forged Steel Shackles for General Lifting Purposes - Dee Shackles
71 Forged Steel Shackles for General Lifting Purposes - Bow Shackles [EN]
EN 13889 (Bow) - 2008 		Forged Steel Shackles for General Lifting Purposes - Bow Shackles
72 U-bolt Wire Rope Grips - Bridge [EN]
EN 13411-5 (A2) - 2003 		U-bolt Wire Rope Grips - Bridge
73 U-bolt Wire Rope Grips - Collar Nut [EN]
EN 13411-5 (A4) - 2003 		U-bolt Wire Rope Grips - Collar Nut
74 Forged Steel Self-locking Hooks - Grade 8 [EN]
EN 1677-3 - 2001 (+A1:2008) 		Forged Steel Self-locking Hooks - Grade 8
75 Forged Steel Lifting Hooks with Latch, Grade 4 [EN]
EN 1677-5 - 2001 (+A1:2008) 		Forged Steel Lifting Hooks with Latch, Grade 4
76 Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8 [EN]
EN 1677-2 - 2000 (+A1:2008) 		Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8
77 U Shape Bolts (Type MR) [JIS]
JIS B 2809 (MR) - 2018 		U Shape Bolts (Type MR)
78 U Shape Bolts (Type F) [JIS]
JIS B 2809 (F) - 2018 		U Shape Bolts (Type F)
79 Turnbuckle Building, Thread Strap Bolt, Carbon Steel and Hot-dip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Turnbuckle Building, Thread Strap Bolt, Carbon Steel and Hot-dip Zinc Coated Carbon Steel
80 Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
81 Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
82 Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel [JIS]
JIS A 5540 - 2008 		Longer Thread Strap Bolt, Carbon Steel and Hot-clip Zinc Coated Carbon Steel
83 Stainless Steel Thread Strap Bolt [JIS]
JIS A 5540 - 2008 		Stainless Steel Thread Strap Bolt
84 Longer Stainless Steel Thread Strap Bolt [JIS]
JIS A 5540 - 2008 		Longer Stainless Steel Thread Strap Bolt
85 Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products [JIS]
JIS A 5541 - 2008 		Body of Turnbuckle for Building - Carbon Steel Products and Hot-dip Zinc Coated Carbon Steel Products
86 Body of Turnbuckle for Building - Stainless Steel Products [JIS]
JIS A 5541 - 2008 		Body of Turnbuckle for Building - Stainless Steel Products
87 Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products] [JIS]
JIS A 5542 (1A) - 2003 		Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
88 Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products] [JIS]
JIS A 5542 (1B) - 2003 		Bolts of Turnbuckle for Building - Strap Bolt [Carbon Steel and Hot-dip Carbon Steel products]
89 Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] [JIS]
JIS A 5542 (2A) - 2003 		Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
90 Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] [JIS]
JIS A 5542 (2B) - 2003 		Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
91 Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products] [JIS]
JIS A 5542 (3) - 2003 		Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products]
92 Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt [JIS]
JIS A 5542 (4) - 2003 		Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
93 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt [JIS]
JIS A 5542 (A1A) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
94 Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt [JIS]
JIS A 5542 (A1B) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
95 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt [JIS]
JIS A 5542 (A2A) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
96 Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt [JIS]
JIS A 5542 (A2B) - 2003 		Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
97 Straight Shackle Body - Form SA, SB and SC [JIS]
JIS B 2801 - 1996 		Straight Shackle Body - Form SA, SB and SC
98 Shackle Body - Form BD [JIS]
JIS B 2801 - 1996 		Shackle Body - Form BD
99 Shackle Body - Form SD [JIS]
JIS B 2801 - 1996 		Shackle Body - Form SD
100 Bow Shackle Body - Form BA, BB and BC [JIS]
JIS B 2801 - 1996 		Bow Shackle Body - Form BA, BB and BC