About Us Pricing Terms of Use FAQ Contact Us
| 简体 | 繁體 |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe

Click Specification

Unit:mm

Rolling Bearings - Accessories - Lockwasher with Bent Inner Tab

ISO 2982-2 (WB) - 2013

Display drawing:

国际ISO 2982-2 (WB) - 2013 ISO2982-2 2982- Rolling Bearings - Accessories - Lockwasher with Bent Inner Tab
Nominal Diameter
10 12 15 17 20 22 25 28 30 32 35 40 45 50 55
d3
d4
dc ≈
f1 max
M
f
t2
t1 ≈
Minimum number of tabs
10 12 15 17 20 22 25 28 30 32 35 40 45 50 55
13.5 17 21 24 26 28 32 36 38 40 44 50 56 61 67
21 25 28 32 36 38 42 46 49 52 57 62 69 74 81
3 3 4 4 4 4 5 5 5 5 6 6 6 6 8
8.5 10.5 13.5 15.5 18.5 20.5 23 26 27.5 29.5 32.5 37.5 42.5 47.5 52.5
3 3 4 4 4 4 5 5 5 5 5 6 6 6 7
3 3 4 4 4 4 4 4 4 4 4 5 5 5 5
1 1 1 1 1 1 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.5
9 11 11 11 11 11 13 13 13 13 13 13 13 13 17
Nominal Diameter
60 65 70 75 80 85 90 95 100 105 110 115 120 125 130
d3
d4
dc ≈
f1 max
M
f
t2
t1 ≈
Minimum number of tabs
60 65 70 75 80 85 90 95 100 105 110 115 120 125 130
73 79 85 90 95 102 108 113 120 126 133 137 138 148 149
86 92 98 104 112 119 126 133 142 145 154 159 164 170 175
8 8 8 8 10 10 10 10 12 12 12 12 14 14 14
57.5 62.5 66.5 71.5 76.5 81.5 86.5 91.5 96.5 100.5 105.5 110.5 115 120 125
7 7 8 8 8 8 10 10 10 12 12 12 12 12 12
6 6 6 6 6 6 8 8 8 10 10 10 10 10 10
1.5 1.5 1.5 1.5 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2 2 2 2
17 17 17 17 17 17 17 17 17 17 17 17 17 17 17
Nominal Diameter
135 140 145 150 155 160 165 170 180 190 200 220 240 260 280
d3
d4
dc ≈
f1 max
M
f
t2
t1 ≈
Minimum number of tabs
135 140 145 150 155 160 165 170 180 190 200 220 240 260 280
160 160 171 171 182 182 193 193 203 214 226 250 270 300 320
185 192 202 205 212 217 222 232 242 252 262 292 312 342 362
14 16 16 16 16 18 18 18 20 20 20 24 24 28 28
130 135 140 145 147.5 154 157.5 164 174 184 194 213 233 253 273
14 14 14 14 16 16 16 16 18 18 18 20 20 24 24
10 10 10 10 12 12 12 12 12 12 12 14 14 14 14
2 2 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3
17 17 17 17 19 19 19 19 19 19 19 19 19 19 19
Send Inquiry

Similar Standards

1 Tab Washers for Round Nuts [GB]
GB 858 - 1988 		Tab Washers for Round Nuts

View Suppliers
2 External Tab Washers [GB]
GB 856 - 1988 		External Tab Washers

View Suppliers
3 Tab Washers with Long Tab and Wing [GB]
GB 855 - 1988 		Tab Washers with Long Tab and Wing

View Suppliers
4 Tab Washers with Long Tab [GB]
GB 854 - 1988 		Tab Washers with Long Tab

View Suppliers
5 Tab Washers with Long and Stort Tab at Right Angles [CNS]
CNS 4645 - 1983 		Tab Washers with Long and Stort Tab at Right Angles

View Suppliers
6 Tab Washers with Long Tab [CNS]
CNS 159 - 1994 		Tab Washers with Long Tab

View Suppliers
7 Rolling Bearings - Accessories - Lockwasher with Straight Inner Tab [ISO]
ISO 2982-2 (WS) - 2013 		Rolling Bearings - Accessories - Lockwasher with Straight Inner Tab
8 External Tab Washers (Locking Tab Washers) [DIN]
DIN 432 - 1983 		External Tab Washers (Locking Tab Washers)
9 Rolling Bearings - Radial Bearings with Locating Snap Ring - Dimension Series 18 and 19 [ISO]
ISO 464 (18/19) - 1995 		Rolling Bearings - Radial Bearings with Locating Snap Ring - Dimension Series 18 and 19
10 Rolling Bearings - Lockwashers; Safety Plate, Lockclip [DIN]
DIN 5406 - 2011 		Rolling Bearings - Lockwashers; Safety Plate, Lockclip
11 C-washer for Jigs and Fixtures [DIN]
DIN 6372 - 2002 		C-washer for Jigs and Fixtures
12 Machine Tools; Internal Tab Washers for Slotted Round Nuts In Conformity with DIN 1804 [DIN]
DIN 462 - 1973 		Machine Tools; Internal Tab Washers for Slotted Round Nuts In Conformity with DIN 1804
13 Tab Washers for Slotted Round Nuts (Form A & Form B) [DIN]
DIN 70952 - 1976 		Tab Washers for Slotted Round Nuts (Form A & Form B)
14 Rolling Bearings - Radial Bearings with Locating Snap Ring, Series 0, 2, 3 and 4 [ISO]
ISO 464 (0/2/3/4) - 2015 		Rolling Bearings - Radial Bearings with Locating Snap Ring, Series 0, 2, 3 and 4
15 Tab Washers with Long and Short Tap at Right Angles [DIN]
DIN 463 - 1974 		Tab Washers with Long and Short Tap at Right Angles
16 Lockwasher Dimensions Inch Design Series W-00 and W-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Lockwasher Dimensions Inch Design Series W-00 and W-000
17 Lockwasher Dimensions Inch Design Series TW and WH [ANSI]
ANSI /ABMA 8.2 - 1999 		Lockwasher Dimensions Inch Design Series TW and WH
18 Lockwashers and Locking Plates for use with Rolling Bearings [DIN]
DIN 5406 - 1993 		Lockwashers and Locking Plates for use with Rolling Bearings
19 Captive C-washer [DIN]
DIN 6371 - 1999 		Captive C-washer
20 Rolling Bearings - Radial Bearings with Locating Snap Ring, Series 18 and 19 [ISO]
ISO 464 (18/19) - 2015 		Rolling Bearings - Radial Bearings with Locating Snap Ring, Series 18 and 19
21 Tab Washers with Long Tab [DIN]
DIN 93 - 1974 		Tab Washers with Long Tab
22 Snap Rings for Slotted Nuts to DID 7085 [DIN]
DIN 70951 - 1968 		Snap Rings for Slotted Nuts to DID 7085
23 Rolling Bearings - Snap Ring [GB]
GB /T 305 - 1998 		Rolling Bearings - Snap Ring
24 Rolling Bearings-Snap Ring [GB]
GB /T 305 - 2019 		Rolling Bearings-Snap Ring
25 Rolling Bearings - Lockwashers - Type MB/MBA [GB]
GB /T 9160.2 (MB/MBA) - 2017 		Rolling Bearings - Lockwashers - Type MB/MBA
26 Lock Washers with Angular Upturn Tab in Line to The Lug [GB]
GB 1022 - 1976 		Lock Washers with Angular Upturn Tab in Line to The Lug
27 External Tab Washers [UNI]
UNI 6599 		External Tab Washers
28 Lockwasher with Bent Inner Tab [JIS]
JIS B 1554 (AW) - 2016 		Lockwasher with Bent Inner Tab
29 Lockwashers for Locknuts - Heavy Series [NF]
NF E 22-112 - 1969 		Lockwashers for Locknuts - Heavy Series
30 Lock Washers with Angular Upturn Tab Perpendicular to The External Tab [GB]
GB 1023 - 1976 		Lock Washers with Angular Upturn Tab Perpendicular to The External Tab
31 Lockwasher with Bent Inner Tab [JIS]
JIS B 1554 (AWL) - 2016 		Lockwasher with Bent Inner Tab
32 Tab Washers with Long Tab [UNI]
UNI 6600 		Tab Washers with Long Tab
33 Lock Washers With Angular Upturn Tab Perpendicular To The Lug [GB]
GB 1021 - 1978 		Lock Washers With Angular Upturn Tab Perpendicular To The Lug
34 Rolling Bearings - Lockwashers - MBL Series [GB]
GB /T 9160.2 (MBL) - 2006 		Rolling Bearings - Lockwashers - MBL Series
35 Rolling Bearings - Lockwashers - Type MB、MBA [GB]
GB /T 9160.2 (MB) - 2006 		Rolling Bearings - Lockwashers - Type MB、MBA
36 Rolling Bearings - Lockwashers - MBL Series [GB]
GB /T 9160.2 (MBL) - 2017 		Rolling Bearings - Lockwashers - MBL Series
37 Steel Adjusting Rings for Shafts [NF]
NF E 22-161 - 1970 		Steel Adjusting Rings for Shafts
38 Lock Washers with Angular Upturn Tab in Line to The External Tab [GB]
GB 1024 - 1978 		Lock Washers with Angular Upturn Tab in Line to The External Tab
39 Rolling Bearings-Snap Ring [GB]
GB /T 305 - 2019 		Rolling Bearings-Snap Ring
40 Lockwasher with Straight Inner Tab [JIS]
JIS B 1554 (AW/AWL) - 2016 		Lockwasher with Straight Inner Tab
41 Rectangular Lock Washers [CNS]
CNS 158 - 1994 		Rectangular Lock Washers
42 Push-on Spring Bolt Retainer (Inch Series) [SAE]
SAE J 892 (F5) - 1996 		Push-on Spring Bolt Retainer (Inch Series)
43 Tab Lock Washers [GOST]
GOST 13463 - 1977 		Tab Lock Washers
44 External Tab Washers [CNS]
CNS 160 - 1994 		External Tab Washers
45 Tab Washers for Round Nuts [CNS]
CNS 9569 - 1982 		Tab Washers for Round Nuts
46 Internal Tab Washers [CNS]
CNS 4254 - 1978 		Internal Tab Washers