Narrow by:

Reduced Shankx
Previous
1 2 3 4 5 6 7
Next
120°Cross recessed raised countersunk screws GB 974 - 1976
120°Cross recessed raised countersunk screws
37°Flared Tube Fitting - Plug SAE J 514 (070109) - 2001
37°Flared Tube Fitting - Plug
80° Cross recessed raised countersunk head screws ANSI/ASME B 18.6.3 - 2010
80° Cross recessed raised countersunk head screws
80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11] ASME B 18.6.3 - 2013
80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11]
80° Square Recessed Countersunk Head Screws ANSI/ASME B 18.6.3 - 2010
80° Square Recessed Countersunk Head Screws
82°  Flat Coutersunk Trim head Screws  [Table 13] (ASTM F837 / F468) ASME B 18.6.3 - 2013
82° Flat Coutersunk Trim head Screws [Table 13] (ASTM F837 / F468)
82° Cross Recessed Countersunk Head Screws  [Table 2]  (ASTM F837, F468) ASME B 18.6.3 - 2013
82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468)
82° Dimensions of Slotted Oval Countersunk Head Tapping Screws [Table 7] ASME B 18.6.3 - 2013
82° Dimensions of Slotted Oval Countersunk Head Tapping Screws [Table 7]
82° Slotted Flat Countersunk Head Machine Screws [Table 1] (ASTM F837 / F468) ASME B 18.6.3 - 2013
82° Slotted Flat Countersunk Head Machine Screws [Table 1] (ASTM F837 / F468)
82° Slotted Flat Coutersunk Head Tapping Screws [Table 1] ASME B 18.6.3 - 2013
82° Slotted Flat Coutersunk Head Tapping Screws [Table 1]
82° Slotted Oval Countersunk Head Machine Screws  [Table 7] (ASTM F837 / F468) ASME B 18.6.3 - 2013
82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
82° Slotted Undercut 82-deg Flat Countersunk Head Tapping Screws  [Table 9] ASME B 18.6.3 - 2013
82° Slotted Undercut 82-deg Flat Countersunk Head Tapping Screws [Table 9]
82° Slotted Undercut Oval Countersunk Head Machine Screws  [table 11] (ASTM F837 / F468) ASME B 18.6.3 - 2013
82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ EN 3006 - 1994
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃ DIN EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,Long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C EN 3009 - 1998
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,Long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C EN 3008 - 1998
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C
Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃ DIN EN 3006 - 1994
Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃
Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish DIN 11014 - 1968
Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish
Anchor Bolt - Type JA JIS B 1178 (JA) - 1994
Anchor Bolt - Type JA
Arc Stud Welding - Partially Threaded Stud - Type PD ISO 13918 (PD) - 2017
Arc Stud Welding - Partially Threaded Stud - Type PD
Arc Stud Welding - Threaded Stud With Reduced Shaft - Type RD ISO 13918 (RD) - 2017
Arc Stud Welding - Threaded Stud With Reduced Shaft - Type RD
Bolts  with external hexalobular driving feature with small flange DIN 34800 - 2022
Bolts with external hexalobular driving feature with small flange
Bolts of Turnbuckle for Building - Double Ended Stud  [Carbon Steel products] JIS A 5542 (3) - 2003
Bolts of Turnbuckle for Building - Double Ended Stud [Carbon Steel products]
Bolts of Turnbuckle for Building - Eyebolt  [Carbon Steel products] JIS A 5542 (2B) - 2003
Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products] JIS A 5542 (2A) - 2003
Bolts of Turnbuckle for Building - Eyebolt [Carbon Steel products]
Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt JIS A 5542 (4) - 2003
Bolts of Turnbuckle for Building - Stainless Steel Strap Bolt
Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud JIS A 5542 (A3) - 2003
Bolts of Turnbuckle for Building Made of Rolling Steel - Double Ended Stud
Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt JIS A 5542 (A2B) - 2003
Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt JIS A 5542 (A2A) - 2003
Bolts of Turnbuckle for Building Made of Rolling Steel - Eyebolt
Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt JIS A 5542 (A1B) - 2003
Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt JIS A 5542 (A1A) - 2003
Bolts of Turnbuckle for Building Made of Rolling Steel - Strap Bolt
BSP Male Captive Seal Hollow Hex Plug WD YJT 15005 (4BN)
BSP Male Captive Seal Hollow Hex Plug WD
Combination Slotted-Cross Recessed Round Head Machine Screws ANSI/ASME B 18.6.3 - 2010
Combination Slotted-Cross Recessed Round Head Machine Screws
Connections for hydraulic fluid power- Ports and stud ends with metric threads and o-ring sealing - Part 4 : Hex plugs GB /T 2878.4 (PLEH) - 2011
Connections for hydraulic fluid power- Ports and stud ends with metric threads and o-ring sealing - Part 4 : Hex plugs
Connections for hydraulic fluid power- Ports and stud ends with metric threads and o-ring sealing - Part 4 : Internal hex plugs GB /T 2878.4 (PLIH) - 2011
Connections for hydraulic fluid power- Ports and stud ends with metric threads and o-ring sealing - Part 4 : Internal hex plugs
Connections With Double End Studs - Type GP DIN 2510-4 (GP) - 1971
Connections With Double End Studs - Type GP
Connections With Double End Studs - Type GQ DIN 2510-4 (GQ) - 1971
Connections With Double End Studs - Type GQ
Connections With Double End Studs - Type GR DIN 2510-4 (GR) - 1971
Connections With Double End Studs - Type GR
Connections With Double End Studs - Type GS DIN 2510-4 (GS) - 1971
Connections With Double End Studs - Type GS
Connections With Double End Studs - Type HP DIN 2510-4 (HP) - 1971
Connections With Double End Studs - Type HP
Connections With Double End Studs - Type HQ DIN 2510-4 (HQ) - 1971
Connections With Double End Studs - Type HQ
Connections With Double End Studs - Type HR DIN 2510-4 (HR) - 1971
Connections With Double End Studs - Type HR
Connections With Double End Studs - Type HS DIN 2510-4 (HS) - 1971
Connections With Double End Studs - Type HS
Connections With Waisted Stud - Type KU DIN 2510-3 (KU) - 1971
Connections With Waisted Stud - Type KU
Connections With Waisted Stud - Type Z DIN 2510-3 (Z) - 1971
Connections With Waisted Stud - Type Z
Connections With Waisted Stud - Type ZU DIN 2510-3 (ZU) - 1971
Connections With Waisted Stud - Type ZU
Corss Recessed Oval Pan Head Machine Screws CNS 9677 - 1988
Corss Recessed Oval Pan Head Machine Screws
Countersunk Double-Rib Bolts CNS 4698 - 1982
Countersunk Double-Rib Bolts
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8 DIN EN ISO 7046-1 - 2011
Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8
Countersunk Flat Head Screws(common Head Style) With Type H Or Type Z Cross Recess-product Grade A-property Class 8.8 DIN EN ISO 7046-2 - 2011
Countersunk Flat Head Screws(common Head Style) With Type H Or Type Z Cross Recess-product Grade A-property Class 8.8
Countersunk Flat Head Screws(Common Head Style) With Type H Or Type Z Cross Recess-Product Grade A-Property Class 8.8 ISO 7046 (-2) - 2011
Countersunk Flat Head Screws(Common Head Style) With Type H Or Type Z Cross Recess-Product Grade A-Property Class 8.8
Countersunk Flat Head Screws(Common Head Style)With Type H Or Type Z Cross Recess- Product Grade A-Steel Screws Of Property Class 4.8 ISO 7046 (-1) - 2011
Countersunk Flat Head Screws(Common Head Style)With Type H Or Type Z Cross Recess- Product Grade A-Steel Screws Of Property Class 4.8
Countersunk head bolts with double nibs GB /T 800 - 1988
Countersunk head bolts with double nibs
Countersunk Head Double Nib Bolts GB /T 800 - 2020
Countersunk Head Double Nib Bolts
Countersunk Head Nib Bolts GB /T 11 - 2013
Countersunk Head Nib Bolts
Countersunk head nib bolts GB 11 - 1976
Countersunk head nib bolts
Countersunk head square neck bolts GB 10 - 1976
Countersunk head square neck bolts
Countersunk Head Square Neck Bolts GB /T 10 - 2013
Countersunk Head Square Neck Bolts
Previous
1 2 3 4 5 6 7
Next