Narrow by:
Shank with Holex
EN 4162 - 2009
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C
EN 4162 - 2016
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C
GB 24 - 1976
Bolts, Small Hexagon Head With Fit Neck And Hole Through The Shank
GB 23 - 1976
Bolts, Small Hexagon Head With Hole Through The Shank
SAE J 493 - 1961
Clevis Pin
GB /T 882 - 2008
Clevis Pin With Head - Type A and B
EN 22341 - 1992
Clevis Pins With Head
ASME B 18.8.1 - 2014
Clevis Pins With Head
DIN EN 22341 - 1992
Clevis Pins with Head
NF E 25-754 - 1992 (R2002)
Clevis Pins With Head
ANSI/ASME B 18.8.1 - 2000
Clevis Pins With Head
DIN 1444 - 1974
Clevis Pins with Head
GB /T 882 - 1986
Clevis pins with head
ISO 2341 - 1986
Clevis Pins With Head - Type A And B
DIN 1434 - 1977
Clevis Pins With Small Head; Finish M
DIN 1435 - 1977
Clevis Pins With Small Head; Finish mg
NF E 25-753 - 1992 (R2002)
Clevis Pins Without Head
DIN EN 22340 - 1992
Clevis Pins Without Head
EN 22340 - 1992
Clevis Pins Without Head
ISO 2340 - 1986
Clevis Pins Without Head - Type B
GB /T 880 - 1986
Clevis pins without head (Pins with split pin hole )
GB /T 880 - 2008
Clevis Pins Without Head(Pins With Split Pin Hole)
DIN 7643 - 2005
Compression Couplings - Hollow Screws For Ring-Type Banjos
DIN 74305-1 - 1987
Compression Couplings; Hollow Screw
DIN 48073 - 1975
Connecting Bolts For Overhead Power Lines - Form N
DIN 48073 - 1975
Connecting Bolts For Overhead Power Lines - Form S
GB /T 31.1 - 2013
Hexagon Bolts With Split Pin Hole On Shank
GB /T 31.1 - 1988
Hexagon bolts with split pin hole on shank A and B
GB 31.3 - 1988
Hexagon Bolts With Split Pin Hole On Shank-Fine Pitch Thread-Product Grade A and B
GB 31.2 - 1988
Hexagon Bolts With Split Pin Hole On Shank-Reduced Shank-Product Grade B
GB 28 - 1976
Hexagon fit bolts with Split pin hole on shank
GB 28 - 1988
Hexagon Fit Bolts With Split Pin Hole On Shank—Product Grade A And B
GB /T 28 - 2013
Hexagon Fit Shank Bolts With Split Pin Hole On Shank
内六角自攻嵌件
Hexagon socket self-tapping inserts
DIN 1479 - 2005
Hexagon Turnbuckles
GB 3750.3 - 1983
Hollow screws
ANSI/ASME B 18.8.8M - 1994
Metric clevis pin with head
ANSI/ASME B 18.8.7M - 1994
Metric Parallel Pins With Split Pin Hole
DIN 5526 - 1999
Pins with head for rail vehicles
GB 815 - 1988
Round Nuts With Drilled Holes In One Face
GB 816 - 1988
Round Nuts With Set Pin Holes In Side
带孔带头自攻镶嵌件
Self tapping inserts with hole and head
带孔自攻镶嵌件
Self-tapping inserts with hole
带安全槽的自攻镶嵌件
Self-tapping inserts with safety slot
GB 817 - 1988
Slotted Round Nuts
带槽薄壁自攻镶嵌件
Slotted thin wall self-tapping inserts
贮屑自攻镶嵌件
Storage chips tapping inserts
YJT 5021
Thin-walled threaded insert, self-tapping, with cutting bores, SBD 347
YJT 5022
Thin-walled threaded insert, self-tapping, with cutting bores, SBD 348
YJT 5007 (307)
Threaded Insert, Self-Tapping / with Hexagonal Socket, SBI 307
YJT 5008 (308)
Threaded insert, self-tapping / with hexagonal socket, SBI 308
YJT 5013
Threaded Insert, Self-Tapping / with Hexagonal Socket, SBKI 307H
YJT 5014
Threaded insert, self-tapping / with hexagonal socket, SBKI 308H
YJT 5019
Threaded insert, self-tapping with chip reservoirs Acid and rust-resistant, SBS 337
YJT 5020
Threaded insert, self-tapping with chip reservoirs Acid and rust-resistant, SBS 338
YJT 5025
Threaded insert, self-tapping with chip reservoirs and closed floor, SBT 357
YJT 5026
Threaded insert, self-tapping with chip reservoirs and closed floor, SBT 358
YJT 5017
Threaded insert, self-tapping with chip reservoirs and hexagonal socket, SBSI 337
YJT 5018
Threaded insert, self-tapping with chip reservoirs and hexagonal socket, SBSI 338
YJT 5015
Threaded Insert, Self-Tapping with Chip Reservoirs, SBS 337