Categories
+ Washers & Retaining Rings
+ Rings, Bushes, Fittings, Collars

ASME B 18.5 - 2012 (2017)
114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593)
ANSI/ASME B 18.5 - 2012
114-deg Countersunk Square Neck Bolts,(Inch Series) [Table 8] (A307, SAE J429, F468, F593)
ANSI/ASME B 18.5 - 2008
114° Countersunk square neck bolts
ASME B 18.2.5M - 2009
12-Point Flange Head Screws (12.9 / ASTM F468M)
ASME B 18.2.5M - 2013
12-Point Flange Head Screws (12.9 / ASTM F468M)
GB 974 - 1976
120°Cross recessed raised countersunk screws
CNS 4419 - 1981
120°Flat Countersunk Head Short Square Neck Bolts
GB /T 3748 - 2008
24° Cone Connectors - Bulkhead Union
GB /T 3733 (A) - 2008
24° Cone Connectors - Straight Thread, Type A
GB /T 3733 (B) - 2008
24° Cone Connectors - Straight Thread, Type B
GB /T 3733 (E) - 2008
24° Cone Connectors - Straight Thread, Type E
GB /T 3733 (F) - 2008
24° Cone Connectors - Straight Thread, Type F
GB /T 3756 - 2008
24° Cone Connectors - Swivel Stud Straight Adapter With O-ring With Shud End
GB /T 3737 - 2008
24° Cone connectors - Union
GB /T 3746 - 2008
24° Cone Connectors - Union Cross
GB /T 3747 - 2008
24° cone connectors - Weld male
SAE J 514 (070109) - 2001
37°Flared Tube Fitting - Plug
ANSI/ASME B 18.6.3 - 2010
80° Cross recessed raised countersunk head screws
ANSI/ASME B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires)
ANSI/ASME B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires)
ANSI/ASME B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires)
ANSI/ASME B 18.6.3 - 2010
80° Machine Screw and Tapping Screw Nuts (Inch Seires)
ANSI/ASME B 18.6.3 - 2010
80° Slotted flat countersunk head machine screws
ANSI/ASME B 18.6.3 - 2010
80° Slotted undercut 82-deg flat countersunk head machine screws
ANSI/ASME B 18.6.3 - 2010
80° Slotted undercut oval countersunk head machine screws
ASME B 18.6.3 - 2013
80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11]
ANSI/ASME B 18.6.3 - 2010
80° Square Recessed Countersunk Head Screws
BS 4174 - 1972
80°Slotted Raised Countersunk Head Tapping Screws [Table 12]
ASME B 18.6.3 - 2013
82° Flat Coutersunk Trim head Screws [Table 13] (ASTM F837 / F468)
ASME B 18.6.3 - 2013
82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468)
ASME B 18.6.3 - 2013
82° Dimensions of Slotted Oval Countersunk Head Tapping Screws [Table 7]
ASME B 18.6.3 - 2013
82° Slotted Flat Countersunk Head Machine Screws [Table 1] (ASTM F837 / F468)
ASME B 18.6.3 - 2013
82° Slotted Flat Coutersunk Head Tapping Screws [Table 1]
ASME B 18.6.3 - 2013
82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468)
ASME B 18.6.3 - 2013
82° Slotted Undercut 82-deg Flat Countersunk Head Tapping Screws [Table 9]
ASME B 18.6.3 - 2013
82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468)
ISO 9254 - 2008
Aerospace - Bolts, Normal Spline Head, Normal or Pitch Diameter Shank, Long Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa
ISO 9255 - 2008
Aerospace - Bolts, Normal Spline Head, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1100 MPa
EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃
EN 3006 - 1994
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃
DIN EN 3007 - 1996
Aerospace Series-Bolts, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Classification: 900 MPa (At Ambient Temperature)/650℃
EN 3008 - 1998
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C
EN 3009 - 1998
Aerospace Series-Bolts, Hexagon Head, Relieved Shank,Long Thread, In Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718)-Classification: 1275 MPa (At Ambient Temperature)/650°C
EN 2874 - 1996
Aerospace Series-bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread
EN 4162 - 2016
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C
EN 4162 - 2009
Aerospace Series-Screws 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, In Alloy Steel, Cadmium Plated - 1100 MPa (At Ambient Temperature)/235 °C
DIN EN 3006 - 1994
Aerospace Series-Screws, Hexagon Head, Relieved Shank, Long Thread, In Heat Resisting Steel FE-PA92HT (A286), Classification: 900 MPa (at Ambient Temperature)/650℃
DIN 65438 - 1993
Aerospace; Bihexagonal Head Bolts, Close Tolerance, With Mj-thread, Short Thread Length, In Titanium Alloy; Nominal Tensile Strength 1100 Mpa, For Temperatures Up To 315 °c
DIN 65517 - 2002
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy
DIN 65517 - 2020
Aerospace; cheese head bolts, with internal serrations and MJ thread, short thread, titanium alloy
DIN 11014 - 1968
Agricultural Equipment; Countersunk Double-nip Bolts, Sinkings, Metric Thread, Finish
DIN 11015 - 1995
Agricultural Machinery - Flat Countersunk Square Neck Bolts With Short Square
JIS B 1178 (J) - 1994
Anchor Bolt - Type J
JIS B 1178 (J) - 2009
Anchor Bolt - Type J
JIS B 1178 (JA) - 1994
Anchor Bolt - Type JA
JIS B 1178 (JA) - 2009
Anchor Bolt - Type JA
JIS B 1178 (L) - 1994
Anchor Bolt - Type L
JIS B 1178 (L) - 2009
Anchor Bolt - Type L
JIS B 1178 (LA) - 1994
Anchor Bolt - Type LA
JIS B 1178 (LA) - 2009
Anchor Bolt - Type LA