Click Specification

(Non-preferred) dimensions in parentheses.

Slotted Rasied Countersunk Thread Rolling Screws - Form LE

DIN 7500 (LE) - 2000

Display drawing:

Nominal Diameter
d

M2.5

(M3.5)

M10

P	Pitch
d_k	max=nominal size
d_k	min
k	max=nominal size
n	max
n	min
t	max
t	min

0.4	0.45	0.5	0.6	0.7	0.8	1	1.25	1.5
3.8	4.7	5.5	7.3	8.4	9.3	11.3	15.8	18.3
3.5	4.4	5.2	6.94	8.04	8.94	10.87	15.37	17.78
1.2	1.5	1.65	2.35	2.7	2.7	3.3	4.65	5
0.7	0.8	1	1.2	1.51	1.51	1.91	2.31	2.81
0.56	0.66	0.86	1.06	1.26	1.26	1.66	2.06	2.56
1	1.2	1.45	1.7	1.9	2.4	2.8	3.7	4.4
0.8	1	1.2	1.4	1.6	2	2.4	3.2	3.8

①,Material: The thread rolling screws shall be made from cold heading, case hardening quality steel. The core hardness shall be 290 HV 10 to 370 HV 10, and the case hardness shall be 450 HV 0,3 minimum. According to DIN EN ISO 7085

Alternative history

DIN 7500L - 1984 DIN 7500LE - 1995 DIN 7500LE - 2000

Send Inquiry

Similar Standards

1	[DIN] DIN 7500 (KE) - 1995	Slotted Countersunk Thread Rolling Screws
2	[DIN] DIN 7500 (BE) - 2000	Slotted Pan Head Thread rolling screws - Form BE
3	[DIN] DIN 7500 (AE) - 2000	Slotted Cheese Head Thread Rolling Screws - Form AE
4	[DIN] DIN 7500 (B) - 1984	Slotted Pan Head Thread Rolling Screws
5	[DIN] DIN 7500 (AE) - 1995	Slotted Cheese Head Thread Rolling Screws
6	[DIN] DIN 7500 (A) - 1984	Slotted Cheese Head Thread Rolling Screws
7	[DIN] DIN 7500 (KE) - 2000	Slotted Countersunk Flat Head Rolling Screws - Form KE
8	[DIN] DIN 7500 (LE) - 1995	Slotted Rasied Countersunk Thread Rolling Screws
9	[DIN] DIN 7500 (K) - 1984	Slotted Countersunk Thread Rolling Screws
10	[DIN] DIN 7500 (BE) - 1995	Slotted Pan Head Thread Rolling Screws
11	[DIN] DIN 7500 (L) - 1984	Slotted Rasied Countersunk Thread Rolling Screws