简体 | 繁體 | FastenerExpo |

Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws

ASME/ANSI B 18.6.3 (T34) - 2013

Display drawing:

美标ASME/ANSI B18.6.3 (T34) - 2013 ASME/AN Recess Dimensions for Combination Slotted Type I Indented Hex Washer Head Screws

Scan QR Code

Show on Mobile terminal.
Share with friends!

Similar Standards

1 Fasteners - Clearanc holes for bolts and screws [DIN EN]
DIN EN 20273 - 1992
Fasteners - Clearanc holes for bolts and screws
2 Recess Dimensions for Fillister Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T22) - 2013
Recess Dimensions for Fillister Head Screws
3 Body and grip lengths for socket head cap screws [ASME]
ASME B 18.3 (Table 4) - 2012
Body and grip lengths for socket head cap screws
4 Thread rolling screws for ISO metric thread guidelinge values for hole diameters [DIN]
DIN 7500-2 - 1984
Thread rolling screws for ISO metric thread guidelinge values for hole diameters
5 Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T46) - 2013
Thread Lengths for Type A, AB, B, BF, BP and BT Tapping Screws
6 Fasteners—Hexagon products—Widths across flats [ISO]
ISO 272 - 1982
Fasteners—Hexagon products—Widths across flats
7 Tapping screw connections - Guideline values for core hole diameters and use [DIN]
DIN 7975 - 2016
Tapping screw connections - Guideline values for core hole diameters and use
8 Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters [DIN]
DIN 7500 (-2) - 2016
Self-tapping screws for metric ISO threads - Part 2: Guide values for hole diameters
9 Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13 [DIN]
DIN 78 - 1983
Thread ends and lengths of projection of bolt ends for metric ISO threads according to DIN 13
10 Knurle [DIN]
DIN 82 - 1973
Knurle
11 Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T43) - 2013
Dimensions of Threads and Points for Types BF and BT Thread-Cutting Tapping Screws
12 Dimensions of Combination Slotted Truss Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T26) - 2013
Dimensions of Combination Slotted Truss Head Screws
13 Dimensions of Type TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T45) - 2013
Dimensions of Type TRS Tapping Screws
14 Rivet shank diameters [ISO]
ISO 1051 - 1999
Rivet shank diameters
15 Dimensioning and indication of knurling [ISO]
ISO 13444 - 2012
Dimensioning and indication of knurling
16 Recess Dimensions for Binding Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T28) - 2013
Recess Dimensions for Binding Head Screws (Machine Screws Only)
17 Thread run-outs and thread undercuts [DIN]
DIN 76-1 - 2016
Thread run-outs and thread undercuts
18 Countersunk head screws - Head configuration and gauging [EN]
EN 27721 - 1991
Countersunk head screws - Head configuration and gauging
19 Dimensions of Hexagon Sockets [ASME]
ASME B 18.3 (Table 18) - 2012
Dimensions of Hexagon Sockets
20 Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T44) - 2013
Dimensions of Threads and Points for Type D, F, G, and T Thread-Cutting Tapping Screws
21 Type BF and BT, Thread Cutting Tapping Screws  [Table 7] [ASME]
ASME B 18.6.4 (BF/BT) - 1998
Type BF and BT, Thread Cutting Tapping Screws [Table 7]
22 Recess Dimensions for Oval 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T8) - 2013
Recess Dimensions for Oval 82° Countersunk Head Screws
23 Fasteners─Clearance holes for bolts and screws [ISO]
ISO 273 - 1979
Fasteners─Clearance holes for bolts and screws
24 Fasteners—Bolts,screws and studs—Split pins holes and wire holes [ISO]
ISO 7378 - 1983
Fasteners—Bolts,screws and studs—Split pins holes and wire holes
25 Dimensions of Alternate Styles of Points for Thumb and Wing Screws [ASME/ANSI]
ASME/ANSI B 18.17 - 1968 (R1983)
Dimensions of Alternate Styles of Points for Thumb and Wing Screws
26 Recess Dimensions for Pan Head Screws (Types IA, III, and VI) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T19) - 2013
Recess Dimensions for Pan Head Screws (Types IA, III, and VI)
27 Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements [ISO]
ISO 6157-1 - 1988
Fasteners—Surface discontinuities— Part1:Bolts,screws and studs for general requirements
28 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2014
Hexalobular internal driving feature for bolts and screws
29 Cross recessed-H type [ISO]
ISO 4757 - 1983
Cross recessed-H type
30 Recess Dimensions for Round Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T36) - 2013
Recess Dimensions for Round Head Screws
31 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T31) - 2013
Recess Dimensions for Type I Nonindented Regular and Large Hex Head Screws
32 Recess Dimensions for Flat 82° Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T2) - 2013
Recess Dimensions for Flat 82° Countersunk Head Screws
33 12 point socket for bolts and screws [DIN]
DIN 34824 - 2007
12 point socket for bolts and screws
34 Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T10) - 2013
Recess Dimensions for Undercut 82-deg Flat Countersunk Head Screws
35 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions [EN]
EN 10058 - 2018
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
36 Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T47) - 2013
Thread Lengths for Type C, D, F, G, T and TRS Tapping Screws
37 Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements [ISO]
ISO 6157-3 - 1988
Fasteners—Surface discontinuities— Part3:Bolts,screw and studs for special requirements
38 Recess Dimensions for Truss Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T25) - 2013
Recess Dimensions for Truss Head Screws
39 Countersunk head screws—Head configuration and guaging [ISO]
ISO 7721 - 1983
Countersunk head screws—Head configuration and guaging
40 Recess Dimensions for Indented Regular and Large Hex Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T30) - 2013
Recess Dimensions for Indented Regular and Large Hex Head Screws
41 Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T12) - 2013
Recess Dimensions for Undercut Oval 82-deg Countersunk Head Screws
42 Recess Dimensions for Indented Hex Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T33) - 2013
Recess Dimensions for Indented Hex Washer Head Screws
43 Fasteners—Surface discontinuities— Part2:Nuts [ISO]
ISO 6157-2 - 1995
Fasteners—Surface discontinuities— Part2:Nuts
44 Hexalobular internal driving feature for bolts and screws [ISO]
ISO 10664 - 2005
Hexalobular internal driving feature for bolts and screws
45 Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T16) - 2013
Recess Dimensions for Oval 82-deg Coutersunk Trim Head Screws
46 Type D,F,G and Type T Thread Cutting Tapping Screws  [Table 8] [ASME]
ASME B 18.6.4 (D/F/G/T) - 1998
Type D,F,G and Type T Thread Cutting Tapping Screws [Table 8]
47 Recess dimensions for Flat Countersunk Trim Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T14) - 2013
Recess dimensions for Flat Countersunk Trim Head Screws
48 Cross recessed-Z type [ISO]
ISO 4757 - 1983
Cross recessed-Z type
49 Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T6) - 2013
Recess Dimensions for Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
50 Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T48) - 2013
Standard Test-Plate Thickness and Hole Sizes for Drive-Test Inspection of Tapping Screws
51 Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only) [ASME/ANSI]
ASME/ANSI B 18.6.3 (T4) - 2013
Recess Dimensions for 100-deg Flat Countersunk Head Screws (Machine Screws Only)
52 Recess Dimensions for Combination Slotted Round Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T37) - 2013
Recess Dimensions for Combination Slotted Round Head Screws
53 Recess Dimensions for Round Washer Head Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T39) - 2013
Recess Dimensions for Round Washer Head Screws
54 Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series [ISO]
ISO 7994 - 1985
Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices. Metric series
55 60° centre holes - Types R. A. B. and C [DIN]
DIN 332 (-1) - 1986
60° centre holes - Types R. A. B. and C
56 Metic threads and points for tapping screws [ASME]
ASME B 18.6.5M - 2000 (R2010)
Metic threads and points for tapping screws
57 Hexalobular internal driving feature for bolts and screws [JIS]
JIS B 1015 - 2018
Hexalobular internal driving feature for bolts and screws
58 General purpose bolts and screws - Radius under the head [GB]
GB /T 3105 - 2002
General purpose bolts and screws - Radius under the head
59 Countersinks for countersunk head screws [GB]
GB /T 152.2 - 2014
Countersinks for countersunk head screws
60 Hexagon lobuar for fasteners - Type E [GB]
GB 6189 - 1986
Hexagon lobuar for fasteners - Type E
61 Taper keys of keyways [GB]
GB /T 1563 - 2017
Taper keys of keyways
62 Woodruff keyways [GB]
GB /T 1098 - 2003
Woodruff keyways
63 Hot-rolled channel steel [GB]
GB 707 - 1988
Hot-rolled channel steel
64 Hexalobular internal driving feature for bolts and screws [GB]
GB /T 6188 - 2017
Hexalobular internal driving feature for bolts and screws
65 Drill diameter for use prior to tapping screw threads [GB]
GB /T 20330 - 2006
Drill diameter for use prior to tapping screw threads
66 Fasteners - Split pin holes and wire holes (ISO 7378:1983) [GB]
GB 5278 - 1985
Fasteners - Split pin holes and wire holes (ISO 7378:1983)
67 Fasteners - Clearanc holes for bolts and screws [GB]
GB 5277 - 1985
Fasteners - Clearanc holes for bolts and screws
68 Countersunk head screws - Head configuration and gauging [GB]
GB /T 5279 - 1985
Countersunk head screws - Head configuration and gauging
69 length of semi-tubular rivets [JIS]
JIS B 1215 (T6) - 1976
length of semi-tubular rivets
70 Fasteners-Ends of parts with external thread(ISO 4753:2011, MOD) [GB]
GB /T 2 - 2016
Fasteners-Ends of parts with external thread(ISO 4753:2011, MOD)
71 Rivet shank diameters (except blind rivets)【ISO 1051:1999】 [GB]
GB 18194 - 2000
Rivet shank diameters (except blind rivets)【ISO 1051:1999】
72 Countersunk flat head screws - Part2: Penetration depth of cross recesses [GB]
GB /T 5279.2 - 1997
Countersunk flat head screws - Part2: Penetration depth of cross recesses
73 Knurl [GB]
GB /T 6403.3 - 2008
Knurl
74 Stress area and bearing area for threaded fasteners [GB]
GB /T 16823.1 - 1997
Stress area and bearing area for threaded fasteners
75 Center holes [GB]
GB /T 145 - 2001
Center holes
76 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD) [GB]
GB /T 3106 - 2016
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, MOD)
77 Fastners - Widths across flats of hexagon products [GB]
GB 3104 - 1982
Fastners - Widths across flats of hexagon products
78 Square and rectangular keyways [GB]
GB /T 1095 - 2003
Square and rectangular keyways
79 Hexalobular internal driving feature  for bolts and screws [GB]
GB /T 6188 - 2008
Hexalobular internal driving feature for bolts and screws
80 Clearance holes for rivets [GB]
GB 152.1 - 1988
Clearance holes for rivets
81 Offset cruciform recess fro rotary fastening devices [GB]
GB /T 12520 - 1990
Offset cruciform recess fro rotary fastening devices
82 Cross recesses for screws [GB]
GB 944.1 - 1985
Cross recesses for screws