简体 | 繁體 | FastenerExpo |

Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels

EN 10025-2 - 2004

Display drawing:

欧标EN 10025-2 - 2004 EN10025-2 10025-2EN Hot rolled products of structural steels - Part 2:Technical delivery conditions for non-alloy structural steels

Scan QR Code

Show on Mobile terminal.
Share with friends!

Alternative history

Similar Standards

1 Free-cutting steels Technical delivery conditions for semi-finished products,hot-rolled bars and rods [EN]
EN 10087 - 1999
Free-cutting steels Technical delivery conditions for semi-finished products,hot-rolled bars and rods
2 High yield strength flat steel products [ISO]
ISO 4950-2 - 1995
High yield strength flat steel products
3 Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels [ISO]
ISO 683-13 - 1986
Heat-treatable steels,alloy steels and free-cutting steels--Part 13: Wrought stainless steels
4 Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties [ISO]
ISO 9327 (-3) - 1999
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 3:Nickel steels with specified low temperature properties
5 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless  steels with specific inspection requirements [EN]
EN 10253-4 - 2003
Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
6 Hot rolled products of non-alloyed structural steels Technical delivery conditions [DIN EN]
DIN EN 10025 - 1994
Hot rolled products of non-alloyed structural steels Technical delivery conditions
7 Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes [EN]
EN 10305-2 - 2002
Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes
8 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption [EN]
EN 10224 - 2002
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
9 Case hardening steel coil [DIN]
DIN 17210 - 1986
Case hardening steel coil
10 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes [EN]
EN 10088-3 - 2005
Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
11 Structural steels--Plates,wide flats,bars,sections and profiles [ISO]
ISO 630 - 1995 (R2003)
Structural steels--Plates,wide flats,bars,sections and profiles
12 cold rolled steel flat products with high yield strength for cold forming - technical delivery conditions [EN]
EN 10268 - 2006 (+A1-2013)
cold rolled steel flat products with high yield strength for cold forming - technical delivery conditions
13 Steel wire for mechanical springs. Part 3:Oil-hardened and tempered wire second edition [ISO]
ISO 8458-3 - 2002
Steel wire for mechanical springs. Part 3:Oil-hardened and tempered wire second edition
14 Ball and Roller Bearing Steels Technical Conditions of Delivery [DIN]
DIN 17230 - 1980
Ball and Roller Bearing Steels Technical Conditions of Delivery
15 Hot rolled steels for quenched and tempered springs; technical delivery conditions [EN]
EN 10089 - 2002
Hot rolled steels for quenched and tempered springs; technical delivery conditions
16 Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels  with specified elevated temperature properties [EN]
EN 10028-2 - 2009
Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
17 teel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels [EN]
EN 10263-5 - 2001
teel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
18 Steel wire for mechanical springs — Part 2: Patented cold-drawn non-alloy steel wire [ISO]
ISO 8458-2 - 2002
Steel wire for mechanical springs — Part 2: Patented cold-drawn non-alloy steel wire
19 Heat-treatable steels, alloy steels and free-cutting steels [ISO]
ISO 683-18 - 1996
Heat-treatable steels, alloy steels and free-cutting steels
20 High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels [ISO]
ISO 4951-2 - 2001
High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
21 Welded circular steel tubes for mechanical and general engineering purposes —  Technical delivery conditions — Part 2 Stainless steel [EN]
EN 10296-2 - 2005
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
22 TECHNICAL SPECIFICATION  Stainless steels-Chemical composition [ISO]
ISO TS 15510 - 2003
TECHNICAL SPECIFICATION Stainless steels-Chemical composition
23 Valve steels and alloys for internal combustion engines [EN]
EN 10090 - 1998
Valve steels and alloys for internal combustion engines
24 Staehle Stainless steels. Part 1:List of stainless steels [EN]
EN 10088-1 - 2005
Staehle Stainless steels. Part 1:List of stainless steels
25 Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements [EN]
EN 10210-1 - 2006
Hot finished structural hollow sections of non-alloy and fine grain steels - Technical delivery requirements
26 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels [EN]
EN 10025-3 - 2004
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
27 Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts [ISO]
ISO 683-1 - 1987
Heat-treatable steels,alloy steels and free-cutting steels. Part 1:Direct-hardening unalloyed and low-alloyed wrought steel in form of different black produts
28 Steels for General Structural Purposes Quality Standard [DIN]
DIN 17100 - 1980
Steels for General Structural Purposes Quality Standard
29 Steel rod, bars and wire for cold heading and cold extrusion Part 4: Technical delivery conditions for steels for quenching and tempering [DIN EN]
DIN EN 10263-4 - 2002
Steel rod, bars and wire for cold heading and cold extrusion Part 4: Technical delivery conditions for steels for quenching and tempering
30 Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels [ISO]
ISO 683-16 - 1976
Heat-treated steels, alloy steels and f ree-cutting steels - Part 16 : Precipitation hardening stainless steels
31 Steel rod,bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working [EN]
EN 10263-2 - 2001
Steel rod,bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
32 Cold heading and extruding steels Technical delivery conditions for killed unalloyed steels not intended for heat treatment [DIN]
DIN 1654-2 - 1989
Cold heading and extruding steels Technical delivery conditions for killed unalloyed steels not intended for heat treatment
33 Stainless steel quality standards [DIN]
DIN 17440 - 1972
Stainless steel quality standards
34 Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels [ISO]
ISO 683-9 - 1988
Heat-treatable steels,alloy steels and free-cutting steels-Part 9:Wrought free-cutting steels
35 Heat resisting steels and nickel alloys [DIN EN]
DIN EN 10095 - 2018
Heat resisting steels and nickel alloys
36 Heat resistant steel castings [EN]
EN 10295 - 2002
Heat resistant steel castings
37 Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties [EN]
EN 10222-2 - 2000
Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
38 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties [EN]
EN 10269 - 2013
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
39 Steel rod,bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels [EN]
EN 10263-3 - 2001
Steel rod,bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
40 Nitriding Steels. Technical Delivery Conditions [EN]
EN 10085 - 2001
Nitriding Steels. Technical Delivery Conditions
41 Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions [EN]
EN 10255 - 2007
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
42 Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels [ISO]
ISO 9327 (-5) - 1999
Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 5:Stainless steels
43 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes [EN]
EN 10305-5 - 2003
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
44 Steel pipes for pipelines for combustible fluids. Technical delivery conditions [EN]
EN 10208-2 - 2009
Steel pipes for pipelines for combustible fluids. Technical delivery conditions
45 heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steels [ISO]
ISO 683-11 - 1987
heat-treatable steels, alloy steels and free-cutting steels -- part 11: case-hardening steels
46 Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes [EN]
EN 10277-2 - 2008
Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
47 Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels,  normalized [EN]
EN 10028-3 - 2009
Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized
48 Steels for quenching and tempering. Part 2:Technical delivery conditions for non alloy steels [EN]
EN 10083-2 - 2006
Steels for quenching and tempering. Part 2:Technical delivery conditions for non alloy steels
49 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties [EN]
EN 10273 - 2000
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
50 Steels for quenching and tempering - Part 1: General technical delivery conditions [EN]
EN 10083-1 - 1996
Steels for quenching and tempering - Part 1: General technical delivery conditions
51 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties [EN]
EN 10269 - 2006
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
52 Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes [EN]
EN 10297-1 - 2003
Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
53 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel [EN]
EN 10297 (2) - 2005
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
54 Heat resisting steels and nickel alloys [EN]
EN 10095 - 1999
Heat resisting steels and nickel alloys
55 Stainless steel wire and strip for springs Technical delivery and conditions [DIN]
DIN 17224 - 1982
Stainless steel wire and strip for springs Technical delivery and conditions
56 Heat-resistant Steels [ISO]
ISO 4955 - 2005
Heat-resistant Steels
57 pen die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels [EN]
EN 10250-2 - 2000
pen die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
58 Heat-resistant Steels and Alloy [ISO]
ISO 4955 - 1994
Heat-resistant Steels and Alloy
59 Steels for cold heading and cold extruding second edition [ISO]
ISO 4954 - 1993
Steels for cold heading and cold extruding second edition
60 Free-cutting steels technical delivery conditions [DIN]
DIN 1651 - 1988
Free-cutting steels technical delivery conditions
61 Heat-treatable steels,alloy steels and free-cutting steels. Part 14:Hot-rolled steels for quenched and tempered springs third edition [ISO]
ISO 683-14 - 2004
Heat-treatable steels,alloy steels and free-cutting steels. Part 14:Hot-rolled steels for quenched and tempered springs third edition
62 Case hardening steels. Technical delivery conditions [EN]
EN 10084 - 1998
Case hardening steels. Technical delivery conditions
63 Hot-rolled stainless steel plate,sheet and strip [JIS]
JIS G 4304 - 2005
Hot-rolled stainless steel plate,sheet and strip
64 Carbon Structural Steels [GB]
GB /T 700 - 2006
Carbon Structural Steels
65 Cold-rolled carbon structural steel strips [GB]
GB /T 716 - 1991
Cold-rolled carbon structural steel strips
66 Structural steels with specified hardenability bands [JIS]
JIS G 4052 - 2003
Structural steels with specified hardenability bands
67 Cold rolled stainless steel plate and strip [GB]
GB /T 3280 - 2015
Cold rolled stainless steel plate and strip
68 High carbon chromium bearing steels [JIS]
JIS G 4805 - 2008
High carbon chromium bearing steels
69 High speed tool steels [JIS]
JIS G 4403 - 2005
High speed tool steels
70 Austenitic-Ferritic (duplex) grade stainless steel seamless tubes and pipes [GB]
GB /T 21833 - 2008
Austenitic-Ferritic (duplex) grade stainless steel seamless tubes and pipes
71 Low-alloyed steels for cold heading. Part 1:Wire rods [JIS]
JIS G 3509-1 - 2003
Low-alloyed steels for cold heading. Part 1:Wire rods
72 Specification for Carbon steel bars for the reinforcement of concrete [BS]
BS 4449 - 1997
Specification for Carbon steel bars for the reinforcement of concrete
73 Steel plate, sheet and strip —Part 2: Specification for stainless and heat-resisting steel plate, sheet and strip [BS]
BS 1449-2 - 1983
Steel plate, sheet and strip —Part 2: Specification for stainless and heat-resisting steel plate, sheet and strip
74 Structural Steels Subject to End-quench Hardenability Requirments [GB]
GB /T 5216 - 2004
Structural Steels Subject to End-quench Hardenability Requirments
75 Spring steels [JIS]
JIS G 4801 - 2005
Spring steels
76 Stainless steel wires [GB]
GB /T 4240 - 2009
Stainless steel wires
77 Spring Steels [GB]
GB /T 1222 - 2007
Spring Steels
78 Stainless steel wires [GB]
GB /T 4240 - 2019
Stainless steel wires
79 Stainless steel pipes [JIS]
JIS G 3459 - 2004
Stainless steel pipes
80 Stainless steel wire rod [GB]
GB /T 4356 - 2016
Stainless steel wire rod
81 Quality carbon structure steels [GB]
GB /T 699 - 2015
Quality carbon structure steels
82 Steel for the reinforcement of concrete - Weldable renforcing steel - Bar , coil and decoiled product - Specification [BS]
BS 4449 - 2005
Steel for the reinforcement of concrete - Weldable renforcing steel - Bar , coil and decoiled product - Specification
83 Specification for Wrought steels in the form of blooms,billets,bars and forgings--Part 4:Valve steels [BS]
BS 970-4 - 1970
Specification for Wrought steels in the form of blooms,billets,bars and forgings--Part 4:Valve steels
84 Classification and designation for superalloys and high temperature intermetallic materials [GB]
GB /T 14992 - 2005
Classification and designation for superalloys and high temperature intermetallic materials
85 Specification for wrought steel for machanical and allied engineering purposes part 3:bright bars for general engineering purposes [BS]
BS 970-3 - 1991
Specification for wrought steel for machanical and allied engineering purposes part 3:bright bars for general engineering purposes
86 Designations of corrosion-resistant alloy [GB]
GB /T 15007 - 2017
Designations of corrosion-resistant alloy
87 Stainless steel wire rods [JIS]
JIS G 4308 - 2013
Stainless steel wire rods
88 Stainless Steel Bars [GB]
GB /T 1220 - 2007
Stainless Steel Bars
89 Stainless steel wires for cold heading and cold forging [JIS]
JIS G 4315 - 2000
Stainless steel wires for cold heading and cold forging
90 Stainless steels for general purposes - Plates, wide strips and strips [NF]
NF A 35-573 - 1990
Stainless steels for general purposes - Plates, wide strips and strips
91 Rolled steels for general structure [JIS]
JIS G 3101 - 2011
Rolled steels for general structure
92 Cold-rolled stainless steel plate,sheet and strip [JIS]
JIS G 4305 - 2005
Cold-rolled stainless steel plate,sheet and strip
93 Heat-resistant Steel Bars [GB]
GB /T 1221 - 2007
Heat-resistant Steel Bars
94 British Standard Specification for Wrough steels for mechanical and allied engineering purposes Part 1. General inspection and testing procedures and specific requirements for carbon,carbon manganese,alloy and stainless steels [BS]
BS 970-1 - 1983
British Standard Specification for Wrough steels for mechanical and allied engineering purposes Part 1. General inspection and testing procedures and specific requirements for carbon,carbon manganese,alloy and stainless steels
95 Free-cutting steels [JIS]
JIS G 4804 - 2008
Free-cutting steels
96 Stainless and heat-resisting steels - Designation and chemical composition [GB]
GB /T 20878 - 2007
Stainless and heat-resisting steels - Designation and chemical composition
97 Heat-resisting steel bars and wire rods [JIS]
JIS G 4311 - 1991
Heat-resisting steel bars and wire rods
98 Steels for turbine bolts at high temperature [GB]
GB /T 20410 - 2006
Steels for turbine bolts at high temperature
99 Carbon steels for cold heading -- Wire rods [JIS]
JIS G 3507-1 - 2005
Carbon steels for cold heading -- Wire rods
100 Conversion of hardness and strength for ferrous metal [GB]
GB /T 1172 - 1999
Conversion of hardness and strength for ferrous metal