简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories
ASME/ANSI B 18.31.3 - 2009 Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)

Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)

ASME/ANSI B 18.31.3 - 2009

Display drawing:

美标ASME/ANSI B18.31.3 - 2009 ASME/ANSI18. Threaded rods(inch series) (F568M, A193/A193M, F738M, F468M)

Scan QR Code

Show on Mobile terminal.
Share with friends!
Send Inquiry

Similar Standards

1 Metric triangle lock with thread end [IFI]
IFI 502 - 1982 		Metric triangle lock with thread end
2 Tapping Screws Thread [ISO]
ISO 1478 - 1999 		Tapping Screws Thread
3 Type A, Thread Forming Tapping Screws [Table E1] [ASME]
ASME B 18.6.4 (A) - 1998 		Type A, Thread Forming Tapping Screws [Table E1]
4 Self-tapping teeth-BF [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		Self-tapping teeth-BF
5 Threads and thread ends for tapping screws [DIN]
DIN 7970 - 1984 		Threads and thread ends for tapping screws
6 Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths [ISO]
ISO 888 - 2012 		Fasteners─Bolts,screws and studs─Nominal lengths and thread lengths
7 Metric Self-tapping Thread End [IFI]
IFI 502 - 1982 		Metric Self-tapping Thread End
8 Triangle lock self-tapping teeth--D、F、G [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		Triangle lock self-tapping teeth--D、F、G
9 ISO - Metric Trapezoidal Screw Threads [DIN]
DIN 103 - 1 - 1977 		ISO - Metric Trapezoidal Screw Threads
10 Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T41) - 2013 		Dimensions of Threads and Points for Type B and BP Thread-Forming Tapping Screws
11 Wood thread [ASME/ANSI]
ASME/ANSI B 18.6.1 - 1997 		Wood thread
12 Wood thread [ASME/ANSI]
ASME/ANSI B 18.6.1 - 1981 		Wood thread
13 self-tapping teeth-B [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		self-tapping teeth-B
14 Typ C, Thread Forming Tapping Screws [Table V1] [ASME]
ASME B 18.6.4 (C) - 1998 		Typ C, Thread Forming Tapping Screws [Table V1]
15 ISO metric trapezoidal screw threads - Basic and design profiles [ISO]
ISO 2901 - 2016 		ISO metric trapezoidal screw threads - Basic and design profiles
16 Thread and body dimeters for wood screws [ASME/ANSI]
ASME/ANSI B 18.6.1 - 1981 (R2016) 		Thread and body dimeters for wood screws
17 Pipe threads where pressure-tight joints are not made on the threads [ISO]
ISO 228-1 - 2000 		Pipe threads where pressure-tight joints are not made on the threads
18 Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T42) - 2013 		Dimensions of Threads and Points for Type A Thread-Forming Tapping Screws
19 Plastic threads [DIN]
DIN 7505 - 1986 		Plastic threads
20 Type AB, Thread Forming Tapping Screws [Table 5] [ASME]
ASME B 18.6.4 (AB) - 1998 		Type AB, Thread Forming Tapping Screws [Table 5]
21 Lag screw threads [ASME/ANSI]
ASME/ANSI B 18.2.1 - 2010 		Lag screw threads
22 AB self-tapping teeth [ASME/ANSI]
ASME/ANSI B 18.6.3 - 2010 		AB self-tapping teeth
23 Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws [ASME/ANSI]
ASME/ANSI B 18.6.3 (T40) - 2013 		Dimensions of Threads and Points for Type AB and Type ABR Thread-forming Screws
24 Thread and thread ends for wood screws [DIN]
DIN 7998 - 1975 		Thread and thread ends for wood screws
25 Type B and BP, Thread Forming Tapping Screws [Table 6] [ASME]
ASME B 18.6.4 (B/BP) - 1998 		Type B and BP, Thread Forming Tapping Screws [Table 6]
26 Whitworth pipe threads for pipe unions [DIN]
DIN 3858 - 2005 		Whitworth pipe threads for pipe unions
27 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994） [GB]
GB /T 7306.1 - 2000 		Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Parallel internal and taper external threads（eqv ISO 7-1:1994）
28 Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads [GB]
GB /T 7307 - 2001 		Pipe Threads with 55 Degree Thread Angle where Pressure-Tight Joints are not Made on the Threads
29 Trapezoidal screw threads - Part 1: Profiles [GB]
GB /T 5796.1 - 2005 		Trapezoidal screw threads - Part 1: Profiles
30 Internal thread for wire thread inserts [GB]
GB /T 24425.5 - 2009 		Internal thread for wire thread inserts
31 Unified screw threads - General plan [GB]
GB /T 20670 - 2006 		Unified screw threads - General plan
32 The blank diameters for rolling general purpose metric screw threads [GB]
GB /T 18685 - 2017 		The blank diameters for rolling general purpose metric screw threads
33 Screws thread shanks for thread forming screw-Metric coarse thread series [GB]
GB /T 6559 - 1986 		Screws thread shanks for thread forming screw-Metric coarse thread series
34 The threads for transition fit [GB]
GB 1167 - 1996 		The threads for transition fit
35 Thread and point details for Type A threads [TABLE 23] [BS]
BS 4174 - 1972 		Thread and point details for Type A threads [TABLE 23]
36 General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan [GB]
GB /T 9146 - 2003 		General purpose metric screw threads - Limits of sizes for the screw threads of coarse quality and preferable plan
37 Miniature screw threads : Profiles , general plan and basic dimensions [GB]
GB /T 15054.1 - 2018 		Miniature screw threads : Profiles , general plan and basic dimensions
38 Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983) [GB]
GB /T 3 - 1997 		Run-outs, undercuts and chamfers for general purpose metric screw threads (ISO 3508:1976 / ISO 4755:1983)
39 General purpose metric screw threads - Limits of sizes [GB]
GB /T 15756 - 2008 		General purpose metric screw threads - Limits of sizes
40 General purpose metric screw threads - Tolerances [GB]
GB /T 197 - 2018 		General purpose metric screw threads - Tolerances
41 Metric threads where pressure-tight joints are made on the threads [GB]
GB /T 1415 - 2008 		Metric threads where pressure-tight joints are made on the threads
42 Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles [GB]
GB /T 13576.1 - 2008 		Buttress Thread with the Flank Angles of 3 and 30 Degrees - Part 1: Profiles
43 Thread and point details for Type Y thread cutting screws [TABLE 6] [BS]
BS 4174 - 1972 		Thread and point details for Type Y thread cutting screws [TABLE 6]
44 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994） [GB]
GB /T 7306.2 - 2000 		Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads一 Taper internal and external threads（eqv ISO 7-1:1994）
45 General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan [GB]
GB /T 9145 - 2003 		General purpose metric screw threads - Limits of sizes for the screw threads of medium quality and preferable plan
46 The interference-fit threads [GB]
GB /T 1181 - 1998 		The interference-fit threads
47 Pipe threads where pressure-tight joints are made on the threads [GB]
GB 7306 - 1987 		Pipe threads where pressure-tight joints are made on the threads
48 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 1995 		Tapping Screw Threads and Ends
49 Limits of sizes and tolerances for metric coarse screw threads [JIS]
JIS B 0209 - 1997 		Limits of sizes and tolerances for metric coarse screw threads
50 Locking threads with 30 degree wedge ramp [GB]
GB /T 37462 - 2019 		Locking threads with 30 degree wedge ramp
51 Specification for wood screws [GB]
GB /T 922 - 1986 		Specification for wood screws
52 General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD） [GB]
GB /T 192 - 2003 		General purpose metric screw threads-Basic profile（ISO 68-1:1998, MOD）
53 General purpose metric screw threads - Basic dimenslons [GB]
GB /T 196 - 2003 		General purpose metric screw threads - Basic dimenslons
54 Tapping Screw Threads and Ends [JIS]
JIS B 1125 (1) - 2015 		Tapping Screw Threads and Ends
55 Tapping screws thread [GB]
GB /T 5280 - 2002 		Tapping screws thread
56 General purpose metric screw threads - The plan for pipe systems [GB]
GB /T 1414 - 2003 		General purpose metric screw threads - The plan for pipe systems
57 Tapping screw threads and ends [JIS]
JIS B 1125 (1) - 2003 		Tapping screw threads and ends
58 General purpose metric screw threads - Limit deviations [GB]
GB /T 2516 - 2003 		General purpose metric screw threads - Limit deviations
59 General purpose metric screw threads - Preferable plan [GB]
GB /T 9144 - 2003 		General purpose metric screw threads - Preferable plan
60 Dryseal pipe threads with the thread angle of 60 degrees [GB]
GB /T 27944 - 2011 		Dryseal pipe threads with the thread angle of 60 degrees
61 US triangle lock thread-S type [Others]
YJT 1025 - 2012 		US triangle lock thread-S type
62 Metric triangle lock thread-S type [Others]
YJT 1026 - 2012 		Metric triangle lock thread-S type
63 Metric triangle lock thread-C type [Others]
YJT 1027 - 2012 		Metric triangle lock thread-C type
64 Metric triangle lock thread-B type [Others]
YJT 1028 - 2012 		Metric triangle lock thread-B type
65 Metric triangle lock thread-P type [Others]
YJT 1029 - 2012 		Metric triangle lock thread-P type