Click Specification

Flat key

UNI 6604 - 1969

Display drawing:

Download CAD Model

Size

b	max=nominal size (h9)
b	min
h	max
h	min
s	max
s	min
（For thread diameter）on	Diameter of shaft

2	3	4	5	6	8	10	12	14	16	18	20	22
1.975	2.975	3.97	4.97	5.97	7.964	9.964	11.957	13.957	15.957	17.957	19.948	21.948
2	3	4	5	6	7	8	8	9	10	11	12	14
1.975	2.975	3.97	4.97	5.97	6.91	7.91	7.91	8.91	9.91	10.89	11.89	13.89
0.25	0.25	0.25	0.4	0.4	0.4	0.6	0.6	0.6	0.6	0.6	0.8	0.8
0.16	0.16	0.16	0.25	0.25	0.25	0.4	0.4	0.4	0.4	0.4	0.6	0.6
6≤d≤8	8	10	12	17	22	30	38	44	50	58	65	75

Size

100

b	max=nominal size (h9)
b	min
h	max
h	min
s	max
s	min
（For thread diameter）on	Diameter of shaft

25	28	32	36	40	45	50	56	63	70	80	90	100
24.948	27.948	31.938	35.938	39.938	44.938	49.938	55.926	62.926	69.926	79.926	89.913	99.913
14	16	18	20	22	25	28	32	32	36	40	45	50
13.89	15.89	17.89	19.87	21.87	24.87	27.87	31.84	31.84	35.84	39.84	44.84	49.84
0.8	0.8	0.8	1.2	1.2	1.2	1.2	2	2	2	3	3	3
0.6	0.6	0.6	1	1	1	1	1.6	1.6	1.6	2.5	2.5	2.5
85	95	110	130	150	170	200	230	260	290	330	380	440

Send Inquiry

Similar Standards

1	[DIN] DIN 6885 (A) - 1968	Parallel Keys, Deep Pattern - Type A View Suppliers
2	[DIN] DIN 6885-1 (A) - 2021	Parallel Keys, Deep Pattern - Type A View Suppliers
3	[ISO] ISO 2491 - 1974	Thin Parallel Keys
4	[DIN] DIN 6885-1 (B) - 2021	Parallel Keys, Deep Pattern - Type B
5	[DIN] DIN 6885-1 (H) - 2021	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
6	[DIN] DIN 6885-1 (C) - 2021	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
7	[ASME/ANSI] ASME/ANSI B 18.25.1M - 1996	Metric square keys
8	[DIN] DIN 6885-1 (F) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
9	[DIN] DIN 6885 (H) - 1968	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
10	[DIN] DIN 6880 - 1975	Rectangular Key
11	[DIN] DIN 6323 (B) - 2003	Slot stones, loose - Form B
12	[DIN] DIN 6885-1 (G) - 2021	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
13	[DIN] DIN 6880 (C) - 2011	Flat Rectangular Key
14	[DIN] DIN 6885 (C) - 1968	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
15	[DIN] DIN 6880 (A) - 2011	Square Key
16	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998 (R2008)	Metric Square And Pectang-Ular Keys
17	[DIN] DIN 6885 (G) - 1968	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
18	[DIN] DIN 6885 (J) - 1968	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
19	[DIN] DIN 6880 (B) - 2011	Rectangular Key
20	[DIN] DIN 6323 (C) - 2003	Slot stones, loose - Form C
21	[DIN] DIN 6885 (D) - 1968	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
22	[DIN] DIN 6880 - 1975	Square Key
23	[DIN] DIN 6880 - 1975	Flat Rectangular Key
24	[DIN] DIN 6885-1 (E) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
25	[DIN] DIN 6885 (B) - 1968	Parallel Keys, Deep Pattern - Type B
26	[DIN] DIN 6885-1 (D) - 2021	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
27	[DIN] DIN 6323 (A) - 2003	Slot stones, loose - Form A
28	[DIN] DIN 6885 (F) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
29	[DIN] DIN 6885 (E) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
30	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998	Metric Interference Fit Flat Key
31	[DIN] DIN 6885-1 (J) - 2021	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
32	[GB] GB /T 1097 - 2003	Square And Rectangular Keys
33	[GB] GB 1097 - 1979	Square And Rectangular Keys
34	[UNI] UNI 7510 - 1976	Thin parallel keys
35	[UNI] UNI 6605 - 1969	Parallel keys - Type IV
36	[UNI] UNI 6605 - 1969	Parallel keys - Type III
37	[GB] GB /T 1567 - 2003	Sguare And Rectangular Thin Keys
38	[GB] GB 1567 - 1979	Sguare And Rectangular Thin Keys
39	[UNI] UNI 6605 - 1969	Parallel keys - Type V
40	[GB] GB /T 1096 - 1979	Square and Rectangular keys
41	[UNI] UNI 6605 - 1969	Parallel keys - Type II
42	[GB] GB /T 1096 - 2003	Square And Rectangular Keys
43	[UNI] UNI 6605 - 1969	Parallel keys - Type I
44	[UNI] UNI 6605 - 1969	Parallel keys - Type VI
45	[GOST] GOST 23360 - 1978	Keys couplings with prismatic Keys
46	[IS] IS 2048 (A) - 1983	Type A - Keys with both ends round
47	[IS] IS 2048 (B) - 1983	Type B - Keys with both ends square
48	[IS] IS 2048 (C) - 1983	Type C - keys with both ends round with hole for one retaining screw
49	[IS] IS 2048 (D) - 1983	Type D - keys with both ends square with hole for one retaining screw
50	[IS] IS 2048 (E) - 1983	Type E - Keys with both ends round with holes for two retaining screws
51	[IS] IS 2048 (F) - 1983	Type F - Keys with both ends square with holes for two retaining screws
52	[IS] IS 2048 (G) - 1983	Type G - keys with both ends square with chamfer and hole for one retaining screw
53	[IS] IS 2048 (H) - 1983	Type H - Keys with both ends square with chamfer and holes for two retaining screws
54	[IS] IS 2048 (J) - 1983	Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve