简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Spring washers for axial adjustment of ball bearings of small motors

DIN 42013 - 1988

Display drawing:

德标DIN 42013 - 1988 DIN42013 42013DIN Spring washers for axial adjustment of ball bearings of small motors
Screw Thread
d
11 13 16 19 22 24 26 28 30 32 35 40 42 47
d min
dc max=nominal size
min
d3 min
h ≈
H
7.5 8.5 10 12 13 16 17 19 20 23 25 28 31 33
10.9 12.9 15.9 18.8 21.8 23.8 25.8 27.8 29.8 31.8 34.8 39.8 41.8 46.8
10.8 12.8 15.8 18.7 21.7 23.7 25.7 27.7 29.7 31.7 34.7 39.7 41.7 46.7
10 11.7 14.2 17.1 19.6 21.8 23.2 25.3 26 28 29.3 35.8 38 44.5
0.15 0.15 0.15 0.2 0.2 0.2 0.25 0.25 0.25 0.3 0.3 0.3 0.35 0.35
0.5 0.5 0.8 0.8 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Send Inquiry

Similar Standards

1 Wave Spring Lock Washers [CNS]
CNS 4406 - 1978 		Wave Spring Lock Washers

View Suppliers
2 Wave Single Coil Spring Lock Washers [GB]
GB 7246 - 1987 		Wave Single Coil Spring Lock Washers
3 Wave Spring Lock Washers [DIN]
DIN 128 (B) - 1987 		Wave Spring Lock Washers
4 Curved Spring Lock Washers 【Table 13】 WW/No.3 [JIS]
JIS B 1251 (WW/No.3) - 2018 		Curved Spring Lock Washers 【Table 13】 WW/No.3
5 Curved Spring Lock Washers 【Table 8】WW/No.3 [JIS]
JIS B 1251 (WW/No.3) - 2001 		Curved Spring Lock Washers 【Table 8】WW/No.3
6 Crinkle washers - For general engineering purposes - Metric series [BS]
BS 4463 - 1969 		Crinkle washers - For general engineering purposes - Metric series